OpenSUSE Network :: MadWiFi Working But Very Slow?

Sep 20, 2009

My laptop is configured to boot openSUSE 11.1, Vista, and Win2k. Access Point is AirLink101 (Atheros Based).Laptop is Acer Aspire 9410-2028.Win2k wireless speed is 108 (using Atheros Drivers)Vista Wireless speed is 54 (using windows drivers)openSUSE 11.1 Wireless speed is 12 (Using MadWiFi)When I was on 10.3 it ran at 108 on 11.0 it was 36. 36 is not 108 but it was solid 36. I tried using networkmanager and speed went down to 1. Each new version of openSUSE has caused a drop in wireless speed.lspci |grep Atheros0a:05.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)

View 2 Replies


ADVERTISEMENT

Networking :: Madwifi In BT4 R2 - Still Not Working

Apr 12, 2011

I'm using BackTrack 4-R2 and after trying for about 3 days now, I decided to do a fresh install and start from scratch. All of the "HowTo's I saw were for Ubuntu and didn't work.

View 1 Replies View Related

CentOS 5 :: SSH Is Working Extremely Slow, But Only Off-network?

Mar 4, 2009

SSH access works fine from a LAN computer, but anything over the internet is extremely slow or times out. We're talking a good 1-2 minutes just to get the login prompt!This is a new installation, I switched from Fedora to CentOS. Previously, SSH from off-network worked perfectly fine with Fedora.What could it be? All other network services on this machine are working properly and at normal speeds, it's just SSH that is not willing to cooperate.

View 5 Replies View Related

Fedora Networking :: Madwifi 12 - Can't Get Any Wireless Network On List Of Networks

Jan 27, 2010

does it still support the madwifi driver. i have tried to compile madwifi 0.94 that i got from svn and from sourceforge and it was succes, but the problem is it doesnt work. when i compile the source from subversion, i get the ath0 on iwconfig command but i can't get any wireless network on list of network. if i use the one from sourceforge, the iwconfig list even doesnt contain any ath*

View 3 Replies View Related

OpenSUSE Wireless :: Can't Find MadWifi Repository For 11.2

May 29, 2010

I've opensuse 11.2 installed. Why here: Additional package repositories - openSUSE. I cannot find MadWifi Repository for 11.2?

View 7 Replies View Related

OpenSUSE Install :: Network Speed Slow In OpenSUSE 11.3?

Sep 10, 2010

Does anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,

max : 420 kB/s
ave : ~ 200 kB/s

After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:

1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.

2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,

max : 140 kB/s
ave : ~ 80 kB/s

View 9 Replies View Related

OpenSUSE Network :: Ralink Rt2870 Too Slow With 11.2

Nov 22, 2009

I have a Ralink rt2870 chip. Since it did not work with 11.2 out of the box (should it not be in the kernel?), I had to install this driver from the software search area on opensuse.org:

After installing it, it works, but only at reduced speed, (I think), because when keeping the mouse over the list item (of that connection) in Network Manager, a window pops up saying I only have 54Mbit/s.

It says:
Type: WiFI
Interface: ra
Hardware adress: 00:15: .....
Driver: usb
Status: connected
Bit rate: 54 Mbit/s

View 1 Replies View Related

OpenSUSE Network :: 11.4 Slow CIFS Reading

Jun 6, 2011

1. 11.4 x64.
2. Solaris SMB server.
3. Gigabit LAN
4. mounted shares from that server (fstab entries)

write speed: 80-90-100 MB/s read speed extremely slow: 3-4-5 MB/s (really funny - our administrator shoked, but i'm not fun, i need fast lan for work)But when i reboot to windows 7 - i have 60-70-80 MB/s in both directions. Read and Write - nice.What happened? kernel updated and all last updates is applied (exclude kopete-because i use old kopete with animated tray icon).I have to tried many tunes like: "noatime" "directio" and also in /etc/modprobe.d - put conf file with: options cifs CIFSMaxBufSize=130048

View 9 Replies View Related

OpenSUSE Network :: 11.2M5 Mount T Cifs Terribly Slow

Aug 20, 2009

I used command as followings. nothing special. mount -t cifs //192.168.55.53/windows$/Home /mnt/ -o user=username%password It works well after mounted. But mounting itself takes 1-2 minutes terribly. After mounted successfully, file transfer speed looks to be normal.

View 9 Replies View Related

OpenSUSE Network :: Internet Connection Slow In Certain Applications?

May 17, 2011

I have recently moved countries and have finally got my internet connected today after a lengthy wait. I have a pretty fast connection - it's a fibre connection at approx 100Mbps Between my onu (modem) & computer (Lenovo SL510) I have a cisco wrt120N wireless router. I'm using Opensuse 11.3 (also dual boot with Win7)

My problem is . . . When I enter url in firefox (4) I get the message "looking up www. . ." for approx 5 to 15 seconds before anything starts to load. I also have the same behaviour in konqueror, firefox and yast software manager.

If I use Google Chrome the pages load instantly. Even never before visited pages.

A typical webpage such as Stuff.co.nz - Latest New Zealand News & World News, Sports News & NZ Weather Forecasts takes approx 20 to thirty secs to load in firefox and 3 seconds in Chrome. I can see the same behaviour always whether Chrome used first or firefox used first - so cache does not appear to be the issue.

If I boot into Win7 - websites load instantly there also.

I have updated to the latest wireless drivers for my system - but the behaviour is also evident if I attach a lan cable.

Here is a little info

Code:
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 60:EB:69:AE:C6:28
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0

[Code].....

View 7 Replies View Related

OpenSUSE Network :: Browsing Secure Sites Is Very Slow

May 21, 2011

I've recently installed openSUSE 11.4 (64 bit) on my system and am experiencing severe performance issues with websites using https (any site using https). Page loads over https take anywhere between 30 seconds to 2 minutes. It's the same issue posted here Secure sites load slow or not at all -- there was no confirmed solution.

- My router/hardware configuration has not changed in a long time and I've run Ubuntu, Arch Linux, and Windows XP on the same machine within the last year and have not had any issues.
- I also have a laptop running Arch Linux (kernel 2.6.38) and this problem does not occur using Firefox 4 or Chrome. To add to the madness this problem occurs while running Firefox 4 inside a Windows 7 guest via virtual box, but NOT while running IE 8 inside the same guest.
- This issue occurs using Firefox 4, Chromium, Opera, Konqueror, and Arora.
- I've disabled ipv6 in Firefox via about:config.
- I've disabled ipv6 in yast and have attempted to use both the "ifup" and "networkmanager" options.
- I am not using a proxy server.
- I've attempted the fix posted in the Ubuntu forums for a similar problem [ubuntu] [SOLVED] Banking Site is very slow.

View 7 Replies View Related

OpenSUSE Network :: Slow Internet Browsing / Make It Fast?

Oct 6, 2010

I'm running 11.2 on a Dell Latitude D630. Everything has been great other than issues with Suspend and hibernate not working correctly. However after about a month of use browsing the web has really slowed down bad. It doesn't seem to matter if it's in Firefox or Chrome either. I am using a wireless connection that is getting the signal at 85-95%. Even though I still tried using a direct cat-5 connection to the router and it was still slow as well. I have the fastest broadband connection my cable offers and my windows boxes on the same network are still flying.

View 2 Replies View Related

OpenSUSE Network :: Manager / Default Keyring Very Slow Start?

Jan 21, 2011

Recently I purchased a new laptop and installed openSUSE 11.3 x64 Gnome. I was running openSUSE 11.2 x86 Gnome on my previous laptop. Most things are working well, although still tweaking things here and there.

The biggest issue at the moment is starting the network. When I boot the system it loads into desktop (gnome) no problem, but then takes between 3 - 5 minutes to come up asking for Default Keyring Password before it will launch network manager. Everything else has loaded and it running fine except the network.

The first time I launched the system (after install) it worked perfectly, however soon as a set the password for the Default Key this started happening. The time delay before it launches does vary each time but always around 3 minute mark.

View 8 Replies View Related

OpenSUSE Network :: Slow Application Startup Localhost Error

Feb 27, 2011

I recently installed OpenSUSE 11.3 amd64 from DVD on a new HP 625 Laptop. Whenever networking is activated, application startup slows down significantly. When I deactivate networking in the nm-applet application startup is fine. I am using the broadcom-wl package from packman for the broadcom wireless card (BCM4313)

View 9 Replies View Related

OpenSUSE Network :: Yast Says No (or Very Slow) Internet But Firefox Contradicts

Mar 18, 2011

I just installed openSuse11.4 KDE in dual boot with Win7. I have observed that Firefox can open websites but in contrast to this, whenever I try to install rekonq web browser (thats because I find Firefox the slowest browser presently available on earth), Yast says about 593 MB of data to be downloaded and installed. It starts with 3.2 KB/s (or even lesser) speed and further decreases to about 1.3KB/s speed and then ... just stops there (waited for 2-3 hours for downloading just 4-5 MB of data).

View 9 Replies View Related

OpenSUSE Network :: Firefox Oads Pages Really Slow On 11.3 Install

Mar 19, 2011

For some reason Firefox loads pages really slow on my 11.3 install. Chrome everything loads fast. I am running the latest of firefox.I have done the usual tweaks to the about:config that I found on the internet. Is there a reason for this and can I fix it?

View 8 Replies View Related

OpenSUSE Network :: Internet Working - Package Management Not Working

Dec 17, 2010

I use an internet connection with a proxy. I have set the proxy in Firefox and systemsettings so now I can browse the web and I can ping Google from Console. But when I start Software Management, it says "Cannot access installation media". Whats wrong?

View 3 Replies View Related

OpenSUSE Network :: Weired Ping Problems In Working Network?

Feb 13, 2011

I'm new to SuSe and lateley I was trying to establish a Network, when some weired problems occured. I was able to establish the network and i have connection to the internet. The suse-machine is rechable by ping from all the other computers in the network. If I'm tryiing to ping the other computers from the suse-machine, nothing happens. The router responds without packet loss, but every other ping occurs in:

From 192.168.2.6: icmp_seq=2 Destination Host Unreachable
From 192.168.2.6: icmp_seq=3 Destination Host Unreachable
From 192.168.2.6: icmp_seq=4 Destination Host Unreachable
From 192.168.2.6: icmp_seq=5 Destination Host Unreachable

I've been searching for some ideas to solve this problem but couldn't find any.

View 1 Replies View Related

OpenSUSE Network :: Network Wired / Wireless Not Working

Feb 11, 2010

I can not get my network to work.Wireless shows no networks at all and wired the ethernet light does not even turn on. I have dpne heaps of searching but i can not seem to find a solution.

View 6 Replies View Related

OpenSUSE Network :: BroadCom Network Cards Are Not Working?

Sep 4, 2010

I am using open suse 11.1 in my acer emachine laptop. Everything is okay except Network cards are not working. It says that firmware is missing or kernel problems. My network cards are Broadcom network cards. How can I fix it?

View 9 Replies View Related

OpenSUSE Network :: Adsl Modem Acting As A Bridge To My Router Setup - Connection - Internet Went Slow ?

Jun 19, 2011

I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !

View 2 Replies View Related

OpenSUSE Network :: Skype 2.2 On OpenSUSE 11.4 Mic And Video Not Working / Get That?

Aug 28, 2011

I have a fresh install of openSUSE 11.4 with KDE. This includes ALSA and Pulseaudio.

I have a mic and speakers and a webcam. As far as I can see microphone and sound reproduction work, the webcam also works:
- I can arecord and aplay
- KMix works
- amixer and alsamixer work (I am using microphone boost)
- test sounds play
- the webcam works in "Personal Settings (Configure Desktop)": Hardware > Multimedia > Phonon (test camera)
- Pidgin and Empathy work with sound and video.
(had to set this: gconftool-2 --set --type=string /system/gstreamer/0.10/default/audiosrc pulsesrc,
without this setting it was set to alsasrc by default and Pidgin and Empathy didn't work).

I installed Skype 2.2 (also tried 2.1) and tested the video camera in Skype. Result: doesn't work.
I made a test call: I hear the voice of the lady answering the call, but my own voice is not recorded.
In Skype everything is set to use Pulseaudio.

I am at a total loss to understand what is going wrong here. Why does Skype not work, when everything else does??

I made this observation:
When an application records something, a "Capture stream" shows up in the KMix "Capture Streams" tab. For example, when I use arecord, "ALSA capture" shows up, while I record. When I make a call on Empathy, a capture stream shows up in the said tab.

When I make a Skype call, NO capture stream shows up, so obviously Skype is not capturing anything.

View 9 Replies View Related

OpenSUSE Network :: Ssh Working On Lan - Not On Wan

Apr 2, 2010

I'm having some trouble setting up ssh on Suse 11.2 x64

Login with pubkey and/or password works fine over lan :

Code:
slack@mint ~ $ ssh mick@192.168.2.5
Last login: Fri Apr 2 16:44:50 2010 from 192.168.2.14
Have a lot of fun...
mick@linux-s1s2:~> exit

[Code]....

View 6 Replies View Related

Networking :: Slow/Lose Network History Receiving - Network Connection

Oct 12, 2009

I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib

But I clean my PC every few days "BleachBit"

I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast

I am not quite sure what Information you might need from me to give.

I use Ubuntu 8.04 LTS

View 1 Replies View Related

OpenSUSE Network :: 11.2 Bonding In Xen Not Working?

Dec 1, 2009

I'm running 11.2 on a Dell PowerEdge1850. In the normal kernel, bonding is working just fine on the two ethernet ports. When I reboot into the Xen Kernel, I get the following error at boot:

FATAL: Error inserting bonding ... : Unknown symbol in module...

dmesg shows several Unknown symbols. In the end, the module is never loaded.

If I reconfigure the network in Xen to not use bonding, it works fine.

View 3 Replies View Related

OpenSUSE Network :: Web Browsers Not Working?

Feb 9, 2010

I recently upgraded from 10.3 to 11.2, keeping 10.3 and using Gnome. I can't get web access through various browsers but can ping outside IP's and the ISP DNS works. I'm connected through a DSL modem.

The browsers tried so far include Firefox 3.5.4 -> 3.6, Konquerer, and Lynx.

I have used the Network manager in Yast to make the changes and have compared network files in both 10.3 and 11.2. The settings are the same.

View 9 Replies View Related

OpenSUSE Network :: PublicKey On 11.3 Not Working?

Jul 21, 2010

I am having trouble getting ANY publickey to work against OpenSuse 11.3's SSHd. I have tried generaating them on Fresh installs of 11.3 as well as on windows, Freebsd, Opensuse 11.1, OpenSuse 11.2, Mac OSX leopard (PPC), and Fedora. None of them work and it falls back to password authentication when trying to connect to a OpenSuse 11.3 SSHd.

sshd -ddd log output:

debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 926
debug2: parse_server_config: config /etc/ssh/sshd_config len 926
debug3: /etc/ssh/sshd_config:13 setting Port 22

[code]....

View 1 Replies View Related

OpenSUSE Network :: NAT Not Working On Modem0?

Mar 30, 2011

I'm trying to setup NAT for modem0 (ZTE MF100 HSDPA modem) under OpenSUSE 11.3 64-bit, however it's not working. The same configuration works with eth0. eth1 is connected to the internal network. These are the commands I used:

For eth0:
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT

[Code].....

View 3 Replies View Related

OpenSUSE Network :: NFS Has Stopped Working

Apr 13, 2011

After 2 years of good service and after I've changed IP addresses in the router from 192.168.1.2 to 192.168.1.102 my autofs stopped mounting my NAS with NFS. That was the only change.

View 8 Replies View Related

OpenSUSE Network :: Samba Not Working 11.4?

Jun 14, 2011

I have setup samba server, set NMBD, SMBD & NTPD from system services and set apparmor to complain but I am still unable to read any network drives. I have checked the firewall and seen that samba is set to enable for internal allowed services. Also should I be changing the NMBD, SMBD & NTPD to complain from App armor?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved