Fedora Networking :: Madwifi 12 - Can't Get Any Wireless Network On List Of Networks
Jan 27, 2010
does it still support the madwifi driver. i have tried to compile madwifi 0.94 that i got from svn and from sourceforge and it was succes, but the problem is it doesnt work. when i compile the source from subversion, i get the ath0 on iwconfig command but i can't get any wireless network on list of network. if i use the one from sourceforge, the iwconfig list even doesnt contain any ath*
View 3 Replies
ADVERTISEMENT
Jun 2, 2010
I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System -> Administration -> Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong?
Some information about my system:
iwconfig
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
ath0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
[Code].....
I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck
View 1 Replies
View Related
Jun 21, 2011
I accidentally clicked on a wireless network once and now every time I boot up, it tries to connect to that network and asks for the password. I have to keep pressing cancel and then it connects to my regular network.
I tried fiddling around with the network settings but I couldn't see any place where I could remove that network from the 'List of preferred networks' or at least try to prevent it from connecting automatically.
How to remove this network from the list of preferred networks? Edit some file somewhere maybe?
View 6 Replies
View Related
Feb 14, 2011
My wireless network doesn't work. I get no list of broadcasting networks. I have runned 'collectHWData.sh'. This is the output. Does anyone know what I should do to make my wireless work? The problem occurs on my clean installation of SuSe 11.3 on my laptop PC C500 Compaq.
Code:
collectNWData.sh V0.6.5.4.1 (Rev: 1.282, Build: 2011/01/25 19:33:38 UTC)
!!! CND0470I: Reduced analysis capability and less network information because script was
[code]...
View 9 Replies
View Related
Jul 4, 2011
Is there a way I can refresh the list of available wireless networks in the network manager applet? It works correctly when I've just booted but doesn't after I resume after suspending. There's just a message like "wireless networks not available".
I can assure you that the wi-fi is not disabled using a button (my laptop doesn't have such a button), "Fn" key combination or in any other way and the network doesn't go down when I need it.
View 6 Replies
View Related
Jul 10, 2011
I have F15 and use networkmanager to connect to wifi networks. How do I edit the list of saved wireless networks that it tries to automatically connect to? I need to get rid of some networks that it is always trying to connect to.
View 2 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Sep 11, 2010
I'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.
View 2 Replies
View Related
Sep 19, 2010
A couple of weeks ago my laptop's wifi started acting up, to the point that it didn't function. When I click the nwManager icon to being up a list of available networks, it is empty. If I try to create a new network, with the credentials of my modem, it appears to work, and asks for the password. After I enter the password, it seems to work for about 30 seconds (much longer than normal) but then it prompts me again for the password. This cycle continues indefinitely.
I'm running Karmic on a Dell i1525. how to find out what wireless card I have.
View 4 Replies
View Related
Mar 21, 2011
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
View 2 Replies
View Related
Feb 6, 2009
abit new to fedora 9, the installation went ok but now i cannot get access to my network.what happens is that i can click on the wireless icon on the desktop but then i'm not allow to click on my network. there is an edit function available but not sure how to use it.
View 1 Replies
View Related
Aug 28, 2010
I am just trying Fedora from a USB flash drive on my Toshiba Portege t110 netbook. But it does not seem to detect any wireless networks (although I definitely have a few available -- when I boot up with Win7 it can detect them without issues). I don't know if something is wrong or there are some special steps I need to do to get wireless networks working in Fedora...
View 3 Replies
View Related
Nov 7, 2010
This morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
View 4 Replies
View Related
Nov 29, 2010
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
View 4 Replies
View Related
Mar 6, 2010
I am among those unfortunate wretches with an Atheros wireless card (ar5001) and I've had problems with it from the day I installed Ubuntu. I've been using Madwifi to connect to the internet, and it's worked fine, until I lately changed my internet connection, got a new modem etc.
Madwifi works still, but the signal is really weak - while not so on Windows Vista.
I know it's NOT ipv6 related. Do I have to change the connection settings? Is my card outdated or whatever? Am I using inefficient drivers? Should I just not use Madwifi and rather something else instead?
(Trying to install ndiswrapper and get it to work was a dreadful process, so I won't attempt that again.)
View 4 Replies
View Related
Mar 16, 2011
I'm having some problems with my wireless connection. I'm on Ubuntu 10.04, on a HP ProBook 4520s, with a RaLink RT3090 wireless network card. I installed the drivers (hopefully correctly), the wireless seems to work correctly, it scans and finds networks, but when I try to connect to one, it times out after some time, while still attempting to connect. I also have a wired connection that works correctly and without problems. Other computers that try to connect to said wireless network manage to do so without any problems, so this has left me a bit baffled, since, like I said, everything seems to be in order.
I'm a new Ubuntu user, so please tell me what other information I need to provide in order to easily and successfully facilitate troubleshooting this, because it is, as you can imagine, quite aggravating, having a laptop that needs to be connected to the internet through a cable.
View 8 Replies
View Related
Nov 19, 2010
I'm using LiveCD to test my laptop with FC 14. It booted from the LiveCD image last night, but my wireless didn't work. I need the madwifi wireless drivers for my built in Atheros adapter.
Can I download the latest and greatest madwifi drivers, compile them and use them while running from the LiveCD image?
View 4 Replies
View Related
Mar 10, 2010
I was on a car trip earlier, but we were stuck in traffic. The stop-go stop-go kind of BS. I pulled out my 9.10 laptop and figured I'd scan for wifi networks and see how good America was at securing their networks. (I work in IT support so it's one of those things I preach to no end yet people rarely listen).
I was using wifi radar, and picked up a truckload of networks every time we'd stop. But something didn't sit well with me. When I click on the network manager icon in the top gnome panel to see what networks were available, it never seemed to refresh.
Example - the first 5 networks I saw were 1, 2, 3, 4, 5. We would stop-go more and more and miles later when I'd see more networks in the area show up in wifi radar, yet hit my network manager, I'd STILL see networks 1, 2, 3, 4, 5 and not 30, 31, 32, 33, etc like I expected.
What kind of refresh time or cache or whatever does network manager have? I just didn't understand why I was seeing the original networks from 15 minutes/miles ago and it never seemed to update.
View 1 Replies
View Related
Aug 6, 2010
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies
View Related
Jan 7, 2010
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
View 1 Replies
View Related
May 10, 2010
I've Vaio P39 with Karmic 9.10(2.6.31.21). Everything is ok excluding the WWAN. It just is missing in available networks list to connect (LAN and WiFi are ok).
Searching gives that WWAN adapter doesn't start at cold reboot and it's proposed to use Win7 to switching WWAN on and then restart. But it looks like - must have Win7 only to switching WWAN on...This kind of solution for some Vaio laptops
Code:
Probably bad searching from my side but I've no solution yet. Does it exist at all?
View 2 Replies
View Related
Jan 11, 2010
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
View 8 Replies
View Related
Jun 11, 2011
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies
View Related
Feb 26, 2010
I use network-manager-gnome to connect to my wireless networks, but I can only use it with a graphical environment, and it doesn't even work that well since it will drop the connection after a few minutes and I have to reconnect it manually, that means I cannot leave my computer downloading a big file all night since it will only download for a few minutes, does anyone know what package can I use to connect to my wireless without the need of network-manager, even if it's through command line?
View 9 Replies
View Related
Jul 3, 2010
I have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.
Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?
View 1 Replies
View Related
Oct 31, 2010
I'm running fedora 13 but I'm having issues with the wireless connection, I can see all the networks in the area but when I try to connect it does not seem to accept the wep key.Its a Belkin receiver, could do with a little help as this is such a pain. I'm using a pc.---------- Post added at 05:24 AM GMT ---------- Previous post was at 04:59 AM GMT ----------This maybe some use but I don't know much about it.
[Barry@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:8B:90:19:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
View 7 Replies
View Related
Mar 2, 2011
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies
View Related
Sep 8, 2009
After reading and trying tons of tutorials and several OS reinstalls, I'm stuck trying to load wireless on my Dell Vostro 1400 laptop. Before you say search forums! I hurry to tell I did. No solution seems to work. WLAN chipset - Broadcom's BCM4311 / BCM 2050. 1st scenario - native CentOS 5.3 drivers Although CentOS recognize WLAN card and displays it's name correctly, neither network or NetworkManager sees any of wireless networks.
2nd scenario - Broadcom's drivers Most know Broadcom has released Linux drivers. I had some more luck with them than in 1st scenario although problems occur. After successfully compiling Kernel module, wireless networks are discovered and can be successfully connected but no pages load. It seems like DNS is not resolving at all and page loading timeouts instantly. Tested on TKIP-encrypted network.
View 15 Replies
View Related
Feb 11, 2010
I have an Acer Aspire 3000 and just installed a Netgear WGR614ver9.I installed FreeSpire and it works great.{well except} I am online with Eth0 now. It says the wlan0 is working but it does not see any wireless network. I tried it at a couple of places other than here where I thought it should detect a wireless network but it did not. How can I determine if it is FreeSpire or the Wireless card at fault?
View 1 Replies
View Related
Feb 14, 2010
I have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies
View Related