I recently isntalled opensuse 11.3 and I was trying to get the juniper ssl vpn working. It connects and everything goes fine until it prompts me for the root password. Once I do that, it errors out saying: "Modprobe for tun module failed" or something of that nature.
View 8 RepliesI keep getting the error
"Initializing USB keyboard: Modprobe : Can't locate module keybdev [failed]
and "initializing USB Mouse: Modprobe : Cant locate module mouse dev [failed]
I am using Red Hat linux and trying to compile my own kernel...
In 11.3 32 bit I got my Juniper VPN working by following the advice of another post: creating links:
ln -s /usr/lib/libssl.so.0.9.8 /usr/lib/libssl.so.2
ln -s /usr/lib/libcrypto.so.0.9.8 /usr/lib/libcrypto.so.2
I then added "/usr/X11R6/lib" to the end of /etc/ld.so.conf, ran ldconfig and I was away. Neither of these lib files seems to exist in 11.4 64 bit
One of biggest reason I need to use windows is because my company uses Juniper SSL VPN to remote desktop into our company's computer. Our company doesn't allow any native linux/windows app client, only the web SSL VPN is enabled.
Looks like this Juniper SSL VPN only works on windows computers. It makes the windows remote desktop client connect over the SSL web VPN from browser. Of course, linux/SUSE doesn't have the windows desktop client. Is there any way to get RDP work through the given SSL VPN? Otherwise, I guess I need go back install windows and starting using it again.
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies View RelatedI'm using openSUSE 11.3 and i access internet through usb-stick.
Before inserting my usb-stick, i generally remove the usb-storage module driver by this command:
modprobe -r usb-storage
But after this command, i get an output saying that usb-storage is built in and cannot be removed.
Can anybody help me how to remove that module. It works well under ubuntu and Mandriva.
I was trying to compile and insert a module. The module compiles fine and creates tool.ko file(am compiling it from Desktop). Next when I try to use "insmod tool.ko" , it gives em this error: insmod: error inserting 'tool.ko': -1 Operation not permitted.I tried to use modprobe instead , thinking it might install the dependencies(if any) by itself: "modprobe -v tool.ko" but it gives me this error
FATAL: Module tool.ko not found
I went over some linux forum posts and tried to resolve it but no use.I copied all the files from Desktop to the /lib/modules/2.6.34.7-0.7-Desktop/build folder and then ran the commands but still face the same problem. Used this "/sbin/depmod -a " thinking it might update the modeprob.conf file, but no use !
I may be missing a last crucial step while trying to use modprobe to install a module and make it active.The system is Debian (Mint LMDE flavor).The module is for a Realtek wlan driver. Since it appears to be available in the kernel, I chose to try and use it instead of getting into a work-around using ndiswrapper.Here is how I found it..
Code:
# modprobe -l | grep r81
kernel/drivers/net/r8169.ko
[code]...
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
I recently got a eSata docking station for hard drives and after deciding to make those volumes encrypted LVM's, I created my first logical volume. After setting it up in yast2 and rebooting I received a prompt for the lvm password, gave it and received:
Mar 17 13:38:21 blkdragon kernel: [ 1105.172687] padlock: VIA PadLock not detected.
Mar 17 13:38:21 blkdragon kernel: [ 1105.313056] alg: No test for stdrng (krng)
Mar 17 13:38:21 blkdragon kernel: [ 1105.323189] alg: No test for stdrng (ansi_cprng)
Mar 17 13:38:22 blkdragon kernel: [ 1105.416892] padlock: VIA PadLock Hash Engine not detected.
Mar 17 13:38:22 blkdragon modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.31.14-0.6-desktop/kernel/drivers/crypto/padlock-sha.ko): No such device
Boot resumed and I looked for the reason for this, the padlock-sha.ko module does exist in the appropiate place and the volume was mounted in spite of the error message. Lvmdump seems to indicate that the volume is, in fact, encrypted. My thoughts at the moment are that the volume was encrypted by aes, so the padlock-sha.ko was not necessary to mount the volume. Backtracking the message log the same error happened during the creation of the volume before rebooting. The kernel version gives it away but it's a 11.2 machine.
I'm extremely new to SuSE Linux. I wanted to move away from Windows and so I decided to reload my Desktop with SuSE linux.I have had no trouble until now. I'm trying to connect to my work VPN connection. From my laptop (which unfortunately is Vista) I'm able to connect without any issues. However, when I tried out the KVPN application on my SuSE linux, it just doesn't work. I get the error:
Authentification has failed.
As a side note, when I type ping google, the packets are received 100% but when I ping my company address, no packets are received. Hope this info is useful.
(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:
[code]...
Since my Asus WL-3300 seems to be having trouble, I bought a USB adapter -- a Linksys WUSB54G ver 4. Version 4 was apparently important because it came with a Ralink 2570 chip -- and that's supposed to work with Linux (which is why I chose it).I think it will work because, without loading any drivers, Net Manager can see the local routers (about seven of them). But when I choose mine, though it asks for a WEP key, it never connects. I'm not sure now what driver is loading that *almost* works with it. But I think I may still need to load the driver from: URl...But when you read the page it says that the driver has entered the "Mainline Kernel" -- and I'm wondering if that is why the adaptor almost works.So the questions:
1) Without a driver, should this Ralink 2570 be working at all?
2) How do I find what driver *is* loading?
3) Modprobe doesn't seem to be able to find any rt25x00 module, is this right -- or is there some other name I should be looking for?
iwlink scan, ifconfig, etc., all see the adapter as wlan0.lsusb shows the adapter.I'm going to keep searching, but wrote this in case there is something really simple that I'm overlooking.
(Opensuse 11.4, nvidia, core2) PROBLEM: cpu goes into C3 powersaving state even on full load (even when disabled from bios) (acpi=off prevents this). opensuse 11.4 kernel ignores boot option processor.max_cstate=2 (option has no effect). cpufreq util should be able to change governor policy to performance, however acpi-cpufreq driver doesn't load: modprobe acpi-cpufreq -> FATAL: error inserting acpi_cpufreq (/lib.../acpi-cpufreq.ko): No such device
View 7 Replies View RelatedI had this issue with Fedora Core 13, so I switched my laptop back to OpenSuse and continued to have the problem. I can do a host lookup for software.opensuse.com and I get a correct response ...
Code:
linux-edxs:/etc # host software.opensuse.org
software.opensuse.org has address 195.135.221.150
linux-edxs:/etc # host download.opensuse.org
download.opensuse.org has address 195.135.221.134
Firefox works. Thunderbird finds my mail servers just fine. SSH works. But then when I try to do anything involving software updates or installation, I get ...
Code:
linux-edxs:/etc # zypper update
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata []
Download (curl) error for '[URL]':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
I've seen others here post queries about this, and I'll tell you what it was in my case: our DSL modem's DHCP server returns its own IPV4 address as the DNS server. When I looked at /etc/resolve.conf, I saw "nameserver: 192.168.50.254" on the last line -- the IPV4 address of our DSL modem. I manually inserted "nameserver" lines for our ISP's two actual DNS servers, and everything magically started working. Why this should confuse some software under Linux, but not other software, is a mystery. It also seems to be Gnome-specific (I didn't have this problem with OpenSuse 11.3 and KDE 4).
Ask if they're using Gnome, and ask them to check resolve.conf. A lot of DSL modems and home/small office routers return their own IP address (i.e., the same as the gateway address) for the DNS server on a DHCP query. The solution is to manually edit resolve.conf and put in your ISP's DNS server addresses manually. Incidentally, just my opinion, but Network Manager needs to make this an option. Under Windows, for example, you can select "automatically assign DNS" or you can enter them manually, even if you're using DHCP. It'd be nice if Network Manager permitted that.
I have tried setting it up from YAST but no joy so far an I am clueless. The device is a Zonet ZEW2500P(04) USB wireless interface. From the sticky "My wireless doesn't work - a primer on what I should do next"
/usr/bin/lusb
Code:
Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
/usr/sbin/iwconfig
Code:
wlan0 Ralink STA ESSID:""
Mode:Auto Frequency=2.412 GHz
[code]....
I have a brand new Acer netbook happily running UNBR, but I'd be just a little bit happier if I could get it to connect to my corporate VPN. I've done a bit of googling and reading both here and at the Juniper forums site, and it sure *looks* like folks have had some success with this. That's encouraging! What's vexing me right now, though, is that I appear to be having a problem unique to me.
My Java is, I think, right:
Code:
chet@tiny:~$ java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode, sharing)
Also, when I do the "do I have Java?" test at the Java site, it reports my browser and Java are all up to date and happy. However, when I log into my SA2500's portal and start Network Connect, I get this Java error:
Code:
java.lang.ClassFormatError: Incompatible magic value 171731060 in class file SecureNCLauncher
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at sun.plugin2.applet.Applet2ClassLoader.findClass(Applet2ClassLoader.java:208)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Plugin2ClassLoader.java:520)
at sun.plugin2.applet.Plugin2Manager.createApplet(Plugin2Manager.java:2940)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Plugin2Manager.java:1444)
at java.lang.Thread.run(Thread.java:619)
Exception: java.lang.ClassFormatError: Incompatible magic value 171731060 in class file SecureNCLauncher
I keep getting a warning messaged almost every time I reboot about Ubuntu running in low-graphics mode on a Macbook 5,1. This has been happening since Lucid Beta 1.
Quote:
Failed to initialize the NVIDIA kernel module. Please see the
system's kernel log for additional error messages and
consult the NVIDIA README for details.
[code]....
After I finish loading in low graphics mode I have to run "sudo nvidia-xconfig". Then, the next reboot the graphics card driver is loaded properly. Is anyone else experiencing this problem or have an idea how to correct it? I know it is a long shot, but do you think doing a fresh install of the stable release would work?
I need to know I/O stats per process. When executed dstat give the bellow error message.
dstat -M topio -d -M topbio
Module topio failed to load. (No module named dstat_topio)
Module topbio failed to load. (No module named dstat_topbio)
CentOS release 5.3 (Final)
uname -r => 2.6.18-128.2.1.el5
How to resolve the above error message
I don't mean to advertise, but I've searched and searched and couldn't find instructions on using the Juniper SSL VPN Client on 64bit Linux. I got it working on my Fedora x86_64 machine and wrote a blog post on how to. So, if anyone is interested, here is a link: [URL].
View 3 Replies View RelatedWhen the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
Using the instructions provided here, I've been able to use my Linux desktop to VPN into my workplace when running 32-bit Maverick. I've yet to accomplish the same using 64-bit Maverick, which has forced me to install the 32-bit version on my 64-bit Gateway NV55C. Has anyone been able to use Juniper Network Connect on a 64-bit Linux operating system?
View 1 Replies View RelatedI`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View RelatedI have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?
View 9 Replies View RelatedI've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
I recently purchased a Dell Vostro v130 which came with Win 7 pre-loaded. I've been using it for a few weeks with no problems, but now I'd like to install ubuntu studio. I made it through the the partitioning part but now I'm getting a networking error: "Network autoconfiguration failed. Your network is probably not using the DHCP protocol. Alternatively, the DHCP server may be slow or some network hardware is not working properly."
I've been using the wireless connection in win 7 without any problem so I don't know why I'm having a problem now.
I'm trying to emulate Juniper routers on gns3 using this tutorial .
It says about installing kqemu, that is the gui end of qemu, and according to this tutorial it is available for ubuntu, but when i tried searching for it in opensuse, i could not find it.
Is there anyway i can install KQemu in opensuse...
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies View Related