I keep getting the error
"Initializing USB keyboard: Modprobe : Can't locate module keybdev [failed]
and "initializing USB Mouse: Modprobe : Cant locate module mouse dev [failed]
I am using Red Hat linux and trying to compile my own kernel...
I recently isntalled opensuse 11.3 and I was trying to get the juniper ssl vpn working. It connects and everything goes fine until it prompts me for the root password. Once I do that, it errors out saying: "Modprobe for tun module failed" or something of that nature.
View 8 Replies View RelatedI may be missing a last crucial step while trying to use modprobe to install a module and make it active.The system is Debian (Mint LMDE flavor).The module is for a Realtek wlan driver. Since it appears to be available in the kernel, I chose to try and use it instead of getting into a work-around using ndiswrapper.Here is how I found it..
Code:
# modprobe -l | grep r81
kernel/drivers/net/r8169.ko
[code]...
Since my Asus WL-3300 seems to be having trouble, I bought a USB adapter -- a Linksys WUSB54G ver 4. Version 4 was apparently important because it came with a Ralink 2570 chip -- and that's supposed to work with Linux (which is why I chose it).I think it will work because, without loading any drivers, Net Manager can see the local routers (about seven of them). But when I choose mine, though it asks for a WEP key, it never connects. I'm not sure now what driver is loading that *almost* works with it. But I think I may still need to load the driver from: URl...But when you read the page it says that the driver has entered the "Mainline Kernel" -- and I'm wondering if that is why the adaptor almost works.So the questions:
1) Without a driver, should this Ralink 2570 be working at all?
2) How do I find what driver *is* loading?
3) Modprobe doesn't seem to be able to find any rt25x00 module, is this right -- or is there some other name I should be looking for?
iwlink scan, ifconfig, etc., all see the adapter as wlan0.lsusb shows the adapter.I'm going to keep searching, but wrote this in case there is something really simple that I'm overlooking.
while loading the generated lib file to tcl module i got following as belowi know it is searching for "Tcl_DecrRefCount()" method please tell me the library name where above method is defined..!orif anything bad in my program
[root@localhost swig]# tclsh
% load ./example.so example
couldn't load file "./example.so": ./example.so: undefined symbol: Tcl_DecrRefCount
[code]....
I need to load php module without restart/reload apache, is there a way to do that, php has its option to load zend extension using '-z',
php -z <filename>
is there anyway because I need to load php module in runtime, that I don't want to loose the live running session.
i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View RelatedI've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
I was trying to compile and insert a module. The module compiles fine and creates tool.ko file(am compiling it from Desktop). Next when I try to use "insmod tool.ko" , it gives em this error: insmod: error inserting 'tool.ko': -1 Operation not permitted.I tried to use modprobe instead , thinking it might install the dependencies(if any) by itself: "modprobe -v tool.ko" but it gives me this error
FATAL: Module tool.ko not found
I went over some linux forum posts and tried to resolve it but no use.I copied all the files from Desktop to the /lib/modules/2.6.34.7-0.7-Desktop/build folder and then ran the commands but still face the same problem. Used this "/sbin/depmod -a " thinking it might update the modeprob.conf file, but no use !
Tried updating today from Ubuntu 10.04 to 10.10. Seemed to go ok, but on reboot I got the message
Error Modprobe FATAL Could not load /lib/modules/ 2.6.35-21-generic/modules.dep no such file or module
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies View RelatedI have a webhosting account, but the server admin did not include mysqli module. How can I use mysqli in this situation?
I am thinking,
put mysqli module in my web directory
load it using custom php ini
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedI took some pictures tonight and plugged in my flash card reader (via usb) as always. Only this time, the device isn't assigned a proper location (like "sdc3").
A little research later and I *think* I need the module "usb-storage", which I can't get to load. It's been a *long* time since I had to mess with modules and I'd like some fresh eyes on what the problem might be.
This is my lsmod output:
Code:
I also ran modprobe with -n -v:
Code:
I have run depmod -a and tried the modprobe again...
Code:
If I drill down to the /lib/modules/<kernel -r>/drivers/usb/storage/ where the .ko file is and say:
Code:
So.... since I haven't changed anything that I can think of since the last time I took pictures...what happened? How do I fix this?
I have UBUNTU 9.10 and WIN 7 installed on my computer. I turn computer on, choose UBUNTU, do what I need and shut down computer (or reset - doesn't matter). Turn on computer again and get message:
GRUB loading.
no module name found
Aborted. Press any key to exit.
Operating System Not Found.
So I turn comp from Live CD, install GRUB and after resetting computer everything seems fine - but unfortunately not for long. Next reset and the problem is back again. The problem only occurs when I choose UBUNTU. There is no problem with WIN 7...
recently I've updated my kernel, i had to reconfigure some stuff, in particular, the b43 module is not loading at init process, my question is: what command should I use to load it from the init? or what file should I hagve to edit?
View 1 Replies View RelatedI recently got a eSata docking station for hard drives and after deciding to make those volumes encrypted LVM's, I created my first logical volume. After setting it up in yast2 and rebooting I received a prompt for the lvm password, gave it and received:
Mar 17 13:38:21 blkdragon kernel: [ 1105.172687] padlock: VIA PadLock not detected.
Mar 17 13:38:21 blkdragon kernel: [ 1105.313056] alg: No test for stdrng (krng)
Mar 17 13:38:21 blkdragon kernel: [ 1105.323189] alg: No test for stdrng (ansi_cprng)
Mar 17 13:38:22 blkdragon kernel: [ 1105.416892] padlock: VIA PadLock Hash Engine not detected.
Mar 17 13:38:22 blkdragon modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.31.14-0.6-desktop/kernel/drivers/crypto/padlock-sha.ko): No such device
Boot resumed and I looked for the reason for this, the padlock-sha.ko module does exist in the appropiate place and the volume was mounted in spite of the error message. Lvmdump seems to indicate that the volume is, in fact, encrypted. My thoughts at the moment are that the volume was encrypted by aes, so the padlock-sha.ko was not necessary to mount the volume. Backtracking the message log the same error happened during the creation of the volume before rebooting. The kernel version gives it away but it's a 11.2 machine.
I have server 10.04 running, and I modified my fstab file to automatically mount an NTFS partition on startup, but after a reboot, I see that I clearly did something wrong, as now it will not boot. The output is:
[Code]....
init: ureadahead-other main process (923) terminated with status 4 If this is an error with my changes to the fstab file, is there any way I can access is to change it? No matter what i do I can't get it to boot.
download new driver compiled and installed boot it is not loading. uname=Linux Kev 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
lsusb=
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
(Opensuse 11.4, nvidia, core2) PROBLEM: cpu goes into C3 powersaving state even on full load (even when disabled from bios) (acpi=off prevents this). opensuse 11.4 kernel ignores boot option processor.max_cstate=2 (option has no effect). cpufreq util should be able to change governor policy to performance, however acpi-cpufreq driver doesn't load: modprobe acpi-cpufreq -> FATAL: error inserting acpi_cpufreq (/lib.../acpi-cpufreq.ko): No such device
View 7 Replies View RelatedI am having a problem while inserting a particular module.
Following are some prints :-
I am using STLinux-2.4 Distribution, kernel 2.6
I have changed the access permissions on all the .ko as rwx. Still I am getting the problem.
fedora 12 with php 5.3.1 + apache is installed on the server
I needed a FFMPEG + MENCODER + FFMPEG-PHP setup , so I have installed all of the necessary libraries/codecs along with ffmpeg , mencoder and ffmpeg-php
I've added ffmpeg-php (ffmpeg.so) module to php.ini and restarted httpd
But ffmpeg was not showing up in phpinfo() so I grepped : php -i | grep ffmpeg
for some clues and got this warning
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/ffmpeg.so' - /usr/lib/php/modules/ffmpeg.so: undefined symbol: php_gd_gdImageSetPixel in Unknown on line 0
That error explains why ffmpeg is not loading
Obviously something to do with GD library , so I've researched on the net , and found that some users suggest loading the GD module before FFMPEG module.
I gave it a try and added this at the end of php.ini:
Code: [gd]
;loading gd
extension=gd.so
[ffmpeg]
;loading ffmpeg
extension=ffmpeg.so ...but still same error when greping phpinfo()
I update my last kernl to 2.6.38-rc7 but when I launch VirtualBox, on stdout.The vboxdrv kernel module is not loaded. Either there is no module available for the current kernel (2.6.38-rc7) or it failed to load. Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.
View 1 Replies View RelatedPython version 2.6 worked fine but since updating to version 3.1 and now 3.2 I cannot get beyond this error. I have also downloaded and installed APSW v3.7.5
View 2 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
when installing Wine I got the message 'Fatal error loading rundll32.exe'. keep it simple, I'm a newbie.
View 1 Replies View RelatedI need help repairing a Grub loading error 2.
View 4 Replies View RelatedI'm using an Eee netbook so i have no CD drive. I've used Linux for about a week. Someone else installed it for me using their flash drive. If I need to use a flash drive to install I will need info on how to install to a flash drive. I had it set up so i could choose windows or ubuntu at start up. logged into windows to play a game and all it brought up was.
GRUB loading.
error: no such partition
grub rescue>
Now that's all I get when I turn it on.