I don't mean to advertise, but I've searched and searched and couldn't find instructions on using the Juniper SSL VPN Client on 64bit Linux. I got it working on my Fedora x86_64 machine and wrote a blog post on how to. So, if anyone is interested, here is a link: [URL].
View 3 RepliesI just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
View 8 Replies View RelatedI have a brand new Acer netbook happily running UNBR, but I'd be just a little bit happier if I could get it to connect to my corporate VPN. I've done a bit of googling and reading both here and at the Juniper forums site, and it sure *looks* like folks have had some success with this. That's encouraging! What's vexing me right now, though, is that I appear to be having a problem unique to me.
My Java is, I think, right:
Code:
chet@tiny:~$ java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode, sharing)
Also, when I do the "do I have Java?" test at the Java site, it reports my browser and Java are all up to date and happy. However, when I log into my SA2500's portal and start Network Connect, I get this Java error:
Code:
java.lang.ClassFormatError: Incompatible magic value 171731060 in class file SecureNCLauncher
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at sun.plugin2.applet.Applet2ClassLoader.findClass(Applet2ClassLoader.java:208)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Plugin2ClassLoader.java:520)
at sun.plugin2.applet.Plugin2Manager.createApplet(Plugin2Manager.java:2940)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Plugin2Manager.java:1444)
at java.lang.Thread.run(Thread.java:619)
Exception: java.lang.ClassFormatError: Incompatible magic value 171731060 in class file SecureNCLauncher
Using the instructions provided here, I've been able to use my Linux desktop to VPN into my workplace when running 32-bit Maverick. I've yet to accomplish the same using 64-bit Maverick, which has forced me to install the 32-bit version on my 64-bit Gateway NV55C. Has anyone been able to use Juniper Network Connect on a 64-bit Linux operating system?
View 1 Replies View RelatedIn 11.3 32 bit I got my Juniper VPN working by following the advice of another post: creating links:
ln -s /usr/lib/libssl.so.0.9.8 /usr/lib/libssl.so.2
ln -s /usr/lib/libcrypto.so.0.9.8 /usr/lib/libcrypto.so.2
I then added "/usr/X11R6/lib" to the end of /etc/ld.so.conf, ran ldconfig and I was away. Neither of these lib files seems to exist in 11.4 64 bit
One of biggest reason I need to use windows is because my company uses Juniper SSL VPN to remote desktop into our company's computer. Our company doesn't allow any native linux/windows app client, only the web SSL VPN is enabled.
Looks like this Juniper SSL VPN only works on windows computers. It makes the windows remote desktop client connect over the SSL web VPN from browser. Of course, linux/SUSE doesn't have the windows desktop client. Is there any way to get RDP work through the given SSL VPN? Otherwise, I guess I need go back install windows and starting using it again.
I recently isntalled opensuse 11.3 and I was trying to get the juniper ssl vpn working. It connects and everything goes fine until it prompts me for the root password. Once I do that, it errors out saying: "Modprobe for tun module failed" or something of that nature.
View 8 Replies View RelatedJust upgraded from F13 32bit to F14 64bit. The Realtek ethernet controller on my motherboard is now totally disabled. The module r8169 is loaded, but the light on the port is not lit. When I insert the cable the light quickly goes on, then off again.
Needless to say that ping to LAN says destination unreachable.
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedDownloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies View RelatedCan anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?
I bought a new PC with fedora (gnome-based) on it, but i can't seem to connect to my network.
I also have a laptop with fedora 12 which did connect to our network.
I think the problem lies with the new PC, i can't see the NetworkManager icon anymore in the bar, and i don't know how to start it since the NetworkManager daemon failed.
When it was still working I was able to see 1 other network, but on my laptop i was able to see about 10 other networks.
I hope someone could help me fix the networkmanager and possibly help me connect/fix the wireless card.
I've created an ad-hoc network using a wireless device I have at home. When the networks shows up in NetworkManager, I select it, the two dots turn green, and it tries connect for about a minute - but eventually fails.Is there a special way you need to go about in order to connect to ad hoc networks?Note: I've tried connecting to it through Windows, and everything works swell...so the problem isn't from my other device - the problem is Fedora.
View 12 Replies View RelatedEdit: now working, thanks very much Leigh and Dangermouse.
Anyone successfully installed AIR and iPlayer on F11?
I've switched to 32 bit Adobe flash, tried Autoten for AIR and Dangermouse's advice for iPlayer: url.html but it's not working, and trying to install AIR from url results in an endless busy downloading graphic .
I assume my problem is a lack of required packages, though I searched the repositories using YUM extender for the packages listed here: url.html and can't see them either as installed or available.
I want to install IBM Lotus Symphony on my 64 bit system, but yum only finds 32 bit version.
View 14 Replies View Relatedi have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
As i just started to write scripts, i'd obviously like automize some actions, therefor i'd like to check the users system if its 64bit. Is there a function to check this?
were's a good start to get into bash scripting, the files i use as template gave pretty much good info, but yet i have no idea what i'm actualy doing
Iam trying to install F15 64bit but I failed my hardware as folow
mb : asus m5a88m
cpu: amd phenom ii x6 1100t
ram: 8 gb 2x4gb Kingston 1333
hdd : wd 1tb sata3
wd 1tb sata2
vga: ati 4250 b/in
installation media: downloaded dvd image burned the image installed correctly inside vmware and work as expected but the media boot to the first screen quistion and when press ok for new installatin the answer is a serious of errors messages (a lot of it). did my hardware not compatible??
I'm trying to emulate Juniper routers on gns3 using this tutorial .
It says about installing kqemu, that is the gui end of qemu, and according to this tutorial it is available for ubuntu, but when i tried searching for it in opensuse, i could not find it.
Is there anyway i can install KQemu in opensuse...
I was running ubuntu 10.04 for quite a while and one of our clients uses the Juniper SSL VPN connections in order to connect to them. This was working perfectly. However, this week I made a backup of my system, wiped my drive and installed Ubuntu 11.04 with which I am very happy except for the fact that the connection to this client now does not work. Every time I try to connect to the client using the ssl connection it simply says "connection time out".
I thought that it might be a setting on my machine due to the backup restores, so I did a fresh 11.04 installation on a different machine and directly after base installation tried it again, yet the same thing happened. I also thought it might be specific to firefox so I tried 2 other browsers with no luck. This does work with my credentials on my windows VM and on my ubuntu 10.04 vm though. How I get this connection working properly.
I have fc9 installed on my system and I am facing a weird problem When I login to my machine (both as ROOT and USER) I do not get connected to the Internet automatically. I have to right click on the n/w Icon on the task bar, disable it and enable it gain then I get connected.
View 8 Replies View RelatedI installed Fedora 11 on my computer with the live cd. If I run the live cd, the network connection is active. But, after the installation the cannt connect with the wired network. I must use an internal Server to connect the www. The server controlls my mac address and if it correct, the server allow the connection. ipconfig and the network manager can read the correct mac address. Why it does not work
View 1 Replies View RelatedI'm trying to connect my fedora 11 computer to a kubuntu9 computer over a cross wired network cable so i can share files, Internet and printers i dont want to use a router or wifi
what rpm's do i need to install can someone guide me through it
2 days ago I did a fresh install of Fedora on my computer to be dual-booted with Linux Mint. The first time I did this install a few weeks ago, I did all of the updates, rebooted (internet still fine) and when I rebooted again, Fedora could no longer connect to the internet (but could still see the networks and ostensibly connect to them). I fixed it then by manually setting the BSSID/IP/DNS/etc.
And this happened again on the new install! This time it took out the internet connection in Mint too. I tried manually setting the connection settings, but that didn't even work for a while. So, last night, thinking that the install might be the problem, I reinstalled Fedora. This morning I finally got my internet to connect on Mint, but I'm concerned that if I do all of the updates on Fedora I'm just going to end up back at square one with zero internet connection.
I will be staying somewhere that uses WPA encryption for their wireless network. It's a hidden wireless network with the security type being WPA-Personal the encryption type being TKIP.The connection works while in Windows7but not in F12.I edited the /etc/wpa_supplicant/wpa_supplicant.confthe default information already provided for WPA connections.Then, as su, I ran:
Code:
wpa_supplicant -B -Dwext -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf
And the output was:
[code]....