I have an HP DV7 laptop with AR928X Wireless Network Adaptor.Running 11.2.Wireless link was fine for 802.11G, but very flaky when I tried to move to 802.11N.I have downloaded the most recent compat-wireless for my kernel.How does one replace the "stock" version of ath9k with the new one, or does it happen "automagically" ?
View 4 RepliesJust installed 11.3 on a older Dell Dimension 8200 with a D-Link DWA-160 N dual band USB card. The install went ok and the card works (seems a little slow right now but that is next on the list). However, when I run YOU I get the following conflict:
"compat-wireless-kmp-default-2.6.37_k2.6.34.0_12-17.1.i586 requires kernel (default:drivers_usb_core)=6faa2c62dac4f41d, but this requirement cannot be met. Uninstallable providers: kernel-default-base-2.6.34-12.3.i586[openSUSE-11.3 11.3-1.82]"
when the system wants to install patch:Kernel-3038.noarch and patch:Kernel-3709.noarch. I cannot seem to find a suitable provider for the default:drivers_usb_core. Is this something to address here or do I need to go to [URL]?
i'm trying to install on a fedora 12 x86_64 but i have this problem
[root@fedora12 compat-wireless-2009-12-11]# ./scripts/driver-select ath9k
Processing new driver-select request...
Backing up makefile: Makefile.bk
[code]....
i cant seem to install compat-wireless on my netbook i have done it previously but it is not working this timeQuote:
make: gcc: Command not found
make: Entering directory `/usr/src/linux-headers-2.6.35-22-generic'
./scripts/gen-compat-autoconf.sh config.mk > include/linux/compat_autoconf.h
[code]....
I'm trying to compile the bleeding-edge compat-wireless because I know there are some ath9k fixes in it because I use in on my Debian and Ubuntu machines; however, when I try and run make, I receive this error:
Code:
make: *** /lib/modules/2.6.38.8-35.fc15.i686/build: No such file or directory. Stop.
make: *** [modules] Error 2
[code]....
I've got an atheros ar9287 based card with the ath9k driver from the base install of lucid and I installed a compat wireless patch via this thread: [URL]... to fix the issue of the card being stuck on a given channel when using aircrack. Now, my system freezes up after about a minute or two. If I leave the wireless card off, everything runs fine no problem. I uninstalled the compat wireless driver via the readme just make uninstall in the compat-wireless folder, but I still get the freezes. So I assume it has something to do with the patches. I have no idea how to remove the patches. Can anyone help me with this or is there a way to get everything up and running so the original problem of being stuck on a channel is fixed?
View 3 Replies View RelatedI made a custom kernel for maverick, 2.6.35-27. And I want to get the latest Intel 5300 wireless card drivers working. The wireless works now, but I want to get these installed anyway. I've been on a custom compilation kick for a while, and just been wanting to do everything compiled myself, just to learn a lot. Including putting linux on my WNDR3700 router using DD-WRT. Still doing a lot of customization on that as well.
View 1 Replies View RelatedCompiling latest compat-wireless on up to date squeeze install I get this:
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-trunk-686'
Building modules, stage 2.
MODPOST 84 modules
Can't open file
make[4]: *** [__modpost] Error 1
[code].....
I'm trying to get a TP-Link TL-WN821N WiFi USB dongle to work. I bought it because I thought it was based on the Atheros ar9170 chip (which is supported in Squeeze), but I've since learnt that it was based on the ar9271, which is only supported from kernel v2.6.36 on. I've read several threads on the subject, but I'm still confused about what I should exactly do. Since it is stuff that can potentially make the partition unbootable, I prefer to ask rather than to tinker.
I've read that upgrading the kernel would do the trick. The Liquorix kernel is especially recommended in one of those threads. However Liquorix only supports Sid and Testing. Apparently, you still can install it by fetching gcc 4.5 from the Sid repository, then install it... I'm a bit wary of screwing things up though... Another route appears to be the compat-wireless tool. I've downloaded the latest 2.6.32 release of compat-wireless (see here), but there's no reference to the ar9271 in the README. Is it appropriate nevertheless (they refer to an online list of supported drivers that was updated after the release... not sure what to make of it)? Otherwise, can I install the so-called "bleeding-edge compat-wireless" with a 2.6.32 kernel? BTW, I know that I'll also need the ath9k_htc firmware to be installed.
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI am very frustrated with OpenSUSE. This got rid of yum and instead have YaST which is a pain for me. I CANT INSTALL compat-expat1*.rpm either way....it shows dependencies that CAN'T figure outI'm using open SUSE 11 so no yum and just YaST (which I don't understand how to install this from there, can you give me more detailed explanation). The following message appears:Package /home/Downloads/compat-expat1-1.95.8-6.i686.rpm could not be installed.Details:
Subprocess failed. Error: RPM failed: warning: /home/KUMC/rperea/Downloads/compat-expat1-1.95.8-6.i686.rpm: Header V3 RSA/SHA1 signature: NOKEY, key ID 57bbccba
error: Failed dependencies:
[code]....
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies View RelatedI've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedI own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies View RelatedI'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies View RelatedI am trying to configure a wireless connection from YAST under the Network Settings tool.It doesn't seem to do anything. My USB wifi device is detected in YAST > Hardware and I am using the module it says Hardware is using. It doesn't seem to save the module under YAST> Network Settings> Network Card Setup. Is this tool broken or useless? It seems setting up WiFi should be easier than this. YAST should work shouldn't it?
View 9 Replies View RelatedI'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedAfter installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies View RelatedWhen I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies View RelatedI am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
View 3 Replies View RelatedHaving a hard time getting NM to detect wireless usb device: Linksys model WUSB600N. Here are a few commands I do know about.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
[code]....
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
Presently have installation of 11.3, win 7, and Ubuntu 10.04 in a multiple boot. Win 7 and 10.4 are connected wirelessly, no problem getting on line.I know little or nothing about wireless as I created a network in win 7, installed Ubuntu and it recognized my network immediately and I was on line effortlessly Suse was a first choice and its been on my HD a while with no access. So this will be my last shot to gain some insight to getting it on line.
View 4 Replies View Relatedsince a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies View RelatedOne of the biggest issues i have at the moment is that my network based plasmoids on my KDE desktop load before my wireless network connection is established, so i'm thinking it would be best to start up the wireless connection at boot time. On previous distro's, I did this with netcfg but I can't seem to figure out how to do so in OpenSUSE 11.2. Is this the best way to manage this issue or is it possible to set a delay before the plasmoids load up?
View 5 Replies View Related