I hear Pulse Audio is the culprit of all the sound issues. I would like to remove it, and default to straight ALSA or whatever distros like Fedora and Ubuntu use, which has never been problematic for me.
View 9 RepliesI'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
switch between Pulse Audio ALSA OSS etc in 11.2
View 5 Replies View Relatedswitch between Pulse Audio ALSA OSS etc in 11.2
View 1 Replies View Relatedi just upgraded from Skype 2.0.0.72 to 2.1.047. Now my microphone isn't working anymore and i cannot select it in the skype options. From now on i can only select the PulseAudio server ..
So i have read some howtos for PulseAudio. They say i should starte PulseAudio Volume Control. ok.. Now i should go to the tab "Recording". This tab doesnt exist on my pc. I upgraded to the latest version of this volume control. It still doesnt exist.
I am using OpenSuse 11.0 with KDE4.3
Here are some screenshots:
[URL]
PS: My mic is still working with applications, that dont use pulseaudio.
I'm trying to capture audio from a stream, NOT from the mic. This is what I'm doing: Start Audacity, push its record button, play a song. It shows that it is recording but when I play back the results, all background noise, conversation, etc, is in the recording as well as the audio from the song. If the mic is unplugged, I cannot record what I hear coming from the sound card (as in what you hear from the sound card is what you get). I got directions on how to do what I want here ( Looking (maybe) for audio mixer for use with Pulse Audio - Page 2 Posts # 4 and 5) but it's not permanent. I got the instructions in post #11 from that same page to make such a change permanent. I tried using the instructions to make the change permanent (I backed up my default.pa just in case something went wrong) and these are the changes I had made:
Code:
### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
[code]....
I have a TV card connected to my Dish box, and I would like to use it on my computer. The tv card works fine, and the audio is connected to my line in. The audio card receives the audio signal, and I can set the volume and record it without any problem, but I can't get it to redirect to an output in order to hear the sound. I have been battling with this issue since a kernel update back when 11.2 was about to come out. Back then, the alsa mixer had an option called audio loop-back, which did the trick. Since I know I ca record the audio and play it back without any problem, is there an application that can do this automatically and simultaneously?
View 1 Replies View RelatedI am running openSUSE 11.2 with an hda-intel sound card (dell latitude d830) in x64. Pulseaudio is only giving me a "dummy" sound card, even though volume in the yast sound configuration works. Volume is definitely not muted.Here is the requested info:alsa-info.sh:[URL]
Code:
:~> rpm -qa '*alsa*'
alsa-plugins-jack-1.0.21-3.3.x86_64
[code]...
Basically the driver is not working =S no clues to what happened. sound still works in alsamixer but pulseaudio is broke. i kinda need pulse audio to work with wow.
View 1 Replies View Relatedcould not get my sound to operate so i followed the intructions toMulti-media and Restricted Format Installation Guide - openSUSE Forumsnow i have a working audio and video player but my sound is depreciated to an almost inaudible levelwhen i try to open pulse i get connection failed:connection refusedand when i try alsa gui i get function snd_ctl_open failed for default:connection refusedcan anyone please correct this with me or for me. Noob wanting not to regret leaving windows
View 9 Replies View RelatedMy wife is reluctant to move from WinXP so I started my own personal campain to promote fedora at home but my wife complains that I "spend too much time fidling with the thing(PC)" and that "it wasn't the case with WinXP" so I =was looking for ways to impress my wife with fedora's capabilities so I flashed her with compiz and dual screen using our old 52" projection tv as a DVR but rhe problem is that my daughter want to watch her DVDs and my wife want to watch a ..... video.I have a system with two Sound card one embedded on the main board and one on a PCI slot and what I am trying to achive is haveing two applications, like two instances of VLC play their sound on the souncard I select per instance, or one Sound card playing VLC and the other playing a ..... video's sound.
I have looked at pulse audio properties and it detects both of my sound cards just fine and it plays wonderfully on either but that is just it... it will pay on either but not both.I have read that you can configure pulse audio to use your second sound card as sorround or duplicate audio but the idea is dicrete audio from dicrete application. Is there such an use case already supported by pulseaudio?So there might be a solution if I disable Pulse Audio but I rather not but I'm open to either.
Hydrogen, the drum machine for Linux, worked 100% great in Jaunty. I upgraded to Karmic and bam, sound is crackling and laggy.
View 2 Replies View Relatedthe situation was that i had 2 fedora 12 boxen. one played flash videos with sound, and one did not! eventually i found the actual problem, and it was trivially fixed (i don't want to remember the many blind alleys i went into first...).
when i looked at
system ==> sound preferences ==> sound
and selected the 'applications' tab, i got the line:
"no application is currently running or recording audio.",
but the mute check box to the right of the 'output volume' slider at the top of the tab was unticked.
however, when i was running a flash video, i had a line:
"alsa plug-in (npviewer.bin) ..." with another mute check box on the right that was ticked! unticking this new mute check box, enabled firefox to play videos video's with sound!
I have Intel core 2 duo machine running Ubuntu Karmic 64-bit.
Whenever I play a mp3 on rythmbox and use the "top" command, the pulse audio is at top at 100%.
Is it trying to break my system just by running a mp3?
Is my system not able to detect two cores? or Whatever?
It's just unbearable.
Here is the output of top command:
Code:
laxman@Cray-Jaguar:~$ top
top - 20:36:50 up 2:00, 2 users, load average: 0.71, 0.45, 0.45
Tasks: 162 total, 2 running, 160 sleeping, 0 stopped, 0 zombie
Cpu(s): 3.0%us, 48.4%sy, 0.0%ni, 48.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2055676k total, 1778616k used, 277060k free, 100396k buffers
[Code].....
I am using Linux mint Debian Version 64 bit.What may be the fix?? I attached the image.
View 1 Replies View RelatedI would like to redirect pulseaudio sound through ssh to a local client while seeing content through a vnc connection. Something like this:
Client: ssh -L 5901:localhost:5901 user@server.net
Client: vncviewer localhost:5901
Server: Run a web browser with flash content on the server through vnc, but sound is redirected to the client.
A good example is Facebook flash games, most flash games require flash player 10 but my local client only supports up to version 9 because of the architechture.
Why? A number of reasons:
- The local client is not powerful enough to run flash content
- The local client has an architechture that flash does not support, eg ARM, PowerPC, etc.
- Save battery power - use the resources of a server instead of the client.
Environment:
Both the client and server have pulse audio installed and working. The server does not have a physical sound card installed but the client does.
Server: Ubuntu 10.04
Client: Ubuntu 10.10
I have tried these links so far: [URL]
I've searched and searched and can't find a straight answer about this. I want to sent the same signal out of the digital output and one of the analog outputs on the soundcard (Intel HDA) on my motherboard. I'm using ALSA and Pulse Audio.
View 5 Replies View RelatedI have no Pulse Audio libraries anymore...not sure how they got deleted. Sound is working fine though....I wasn't using Pulse to begin with, but don't understand what happened to them....think they got deleted in going to KDE 4.4.1 rel 228 today. Should I have those libraries installed for any reason? If so, what should I install?
PS: If I go to Yast, under multimedia, I know longer see Pulse as an option...only hda_snd_intel or whatever
Just noticed that during calls skype uses ~30-50% cpu, + pulseaudio uses ~20%. I found some old threads on this like [URL] Or [URL]. The former suggests to purge pulse and use alsa/oss instead. The latter suggests changing mic in skype to DeviceXX and tweak the pulse.conf
There's also a launchpad bug on that with status Confirmed->invalid (due to "problem fixed in skype 2.1 beta") but looks like it's not (I am using 2.1 beta)
1. Does any1 has this problem?
2. I can't try 2nd link's approach as my skype has only PulseAudio in the settings, so I can't select Device or anything else!
3. Should I try to remove pulse in favor of ALSA? I'm pretty happy with pulse otherwise that this issue, I use it to record sound out of my sound card and I'm not sure if I can do this with alsa/os.
When using Skype, the sound suddenly stops working, both ways (about 4-5 min into the communication). The message "connection failed: connection terminated" is displayed and when I click OK, Pulse Audio closes and Skype freezes. Actually, and I just realized this, the sound suddenly stops working on Firefox as well. (The Alsa plugin in Pulse Audio 'Playback' just disappears). However this occurs after a long period of use. I've just watched about 30 continuous minutes of live soccer through Espn3, before the audio stopped working. No message was displayed though, and just refreshing the page fixed it.
All this makes me think this is some type of Alsa-Pulse Audio problem. I really don't understand well what they are, although I believe Alsa is a driver and Pulse Audio a sound server? Sorry, I started using Linux very recently. I am using Ubuntu-Studio 10.04 and the rt Kernel (2.6.33-29-realtime). Sometimes I use Pulse Audio in Jack and vice-versa, using pactl load-module module-jack-sink and source respectively, but my problem seems to occur even if I unload the modules before using Skype. I believe all this started happening after I started using the rt kernel and/or the module-jack-sink/source.
I was looking for the Pulse Audio equalizer in the repos and saw that it wasnt there? All the other Pulse Audio stuff is there but not the Pulse Audio equalizer?
View 9 Replies View RelatedI'm trying to get mplayer to recognize ALSA and/or pulse audio server, preferably both. On my laptop, mplayer works fine -- mplayer -ao help lists oss, alsa, pulse, and jack, among others. But here's the output of mplayer -ao help on the computer I'm trying to set up:
[Code].....
ALSA and pulse are both installed, and pulse is running -- ps -A | grep pulse gives: 3627? 00:00:00 pulseaudio Yet, mplayer fails to realize this. I'm sure I'm doing something wrong that's really simple...but what?
I have Ubuntu 9.10 installed but the sound is way below normal..
Pulse-audio just doesn't give enough output..
Max output is just average...
I have a 945 Intel chipset..
I'm using Mate on Jessie. The problem is that mate-volume-control kinda sucks as an audio control. It doesn't have nearly enough options for a proper volume control program. Pulse is much better for my needs. It or Alsa. Is it possible to remove mate-volume-control, or at least make Pulse the default volume control?
View 5 Replies View RelatedI'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies View RelatedI have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
Looks like Pulse is the cause of another problem with the ICE1721 chipset (when will this madness end!!). Anyways I have a pulseverbrose.log file that I'll pastebin here: Ubuntu Pastebin Also results of /usr/sbin/alsa-info.sh are here: Ubuntu Pastebin The symptoms are:
1. with Pulse I can play a guitar through inputs 1&2 and hear the output, but can not play any pgms like Banshee at all.
2. After "killall pulseaudio" I can then play Banshee but no external inputs, like a guitar.
The sys:
1. OpenSuse 11.4
2. 2.6.37.6-0.5-default Kernel
3. pulse-0.9.22
4. cat /proc/asound/version=Advanced Linux Sound Architecture Driver Version 1.0.23
5. Advanced Linux Sound Architecture Driver Version 1.0.23=alsa-1.0.24.1-4.7.1.i586, alsa-utils-1.0.24.2-3.1.i586, alsa-firmware-1.0.24.1-3.1.noarch
I'll update this post with more info as I get into it further..
I would like to remove the audio tracks from various video clips (.avi, .mpg. .wmv, .flv, etc.).I Googled and found lots of ways to strip off the audio and save that sound as an mp3 file, but I have found nothing that would allow me to remove the audio and save my video clip (silently)
View 5 Replies View RelatedI have made a pretty sizable mistake. I was trying to figure out why my game was having sound issues when I was told to update my sound drivers. After a bit of searching, I came across this website. I downloaded and ran the script in the first link. Minor problem: I was using PulseAudio, not ALSA. Needless to say, the script didn't work. After the machine rebooted, I had no sound at all. I was planning on switching to ALSA anyway, so I found this thread and ran the following commands:
[Code]....
I am having trouble getting the pulse audio server to find the hw0 with the common m-audio 24/96 audiophile. This card worked with previous versions of all forms of pulse but seems to bork on the HW0 function for audio out...which is a stereo analogue simple output. Audacity sees the HW functions but pulse does not! Here is a screen shot of the pulse crap. And another screen shot of what the real card at "alsamixer -c 0" sees. There is no dac or adc detected or configured with pulse. This does not make any sense as alsa and alsamixer has all the correct device controls available to any other software that uses the ice1712 driver.
I am using Fedora 12 amd 64 as a live usb on a 16 gig stick and want to be able to record and mix audio on to HD with my reliable high end m-audio pci sound card without having to mess with the pulse crap or having to install a full HD option. BTW in the pulse sound configuration gui dropdown list there is no indication of HW0 and the only devices that are available in pulse are digital outs.....go figure, so essentially I can see all the correct connections and use programs that access alsa directly eg: audacity but have no sound through the crappy and ever borked pulse audio server! Any suggestions as to how to remove all the pulse stuff that comes with most distros that use gnome? I have done this deed before with Ubuntu but do no know how to do the deed with an rpm based system. If I install a non pulse version of xmms and let it use jackd then I should have reliable sound for cd audio etc and should be able to configure VLC, Ardour and Nted well without pulse getting in on the action and screwing up my sound.