Kmix seems gone crazy,always consume 100% of one processor,during video playing with SMplayer or Kaffein,even the playing stopped,player closed,it still keep running.
I'm using 11.4 x86 KDE.
I have a problem with kmix, which uses 100% of my processor without stopping. And this is providing to rise of temperature above 80 degrees Celsius. The problem became actual after one of updates of 11.4 series.
View 9 Replies View RelatedI am using open suse 11.4, and have been trying to play video files from a web site, but when I click on the play link all that happens is that it goes to the page where the video should be but it doesn't load or play, not sure if it is a flash or java problem. the file plays without problem in Ubuntu 10.10 and also Win 7. it is a video file from [URL].
View 8 Replies View Relatedi have a intel video card (laptop)when i try to watch movie, i get a blackscreen..... but i listen the soundMPlayer2 2.0 (C) 2000-2011 MPlayer Team
Playing_game.avi.
Detected file format: AVI format (libavformat)
[lavf] stream 0: video (mpeg4), -vid 0
[code]...
Few days back I changed the video playing speed to faster,since that day,SMplayer keep playing video at high speed even I've change the speed to normal...
View 4 Replies View RelatedI Tried to play video files (.avi & .vob) in Kaffeine, but was unableo hear any audio. Then i went to the packmn site and installed the packageom there, with no positive results.After that i installed VLC and then tried playing.
View 2 Replies View RelatedI have been using my HTPC OpenSuse 11.2 for for some months now and everything is great, I'm very happy that I made the switch to Linux. Today for some reason none of my avi files are able to play. When I try a DVD there is also no play back of the video. Sound is working but video is not there. I have tried Kaffeine, VLC, SM Player. All no luck.
Here is the output after checking with Red Dwarf's troubleshoot thread:
Code:
Recently audio stopped working in my flash video, when browsing in Chrome or Firefox, video is ok, but no audio. I don't know when did it stop to work. My system is SUSE 11.3 with all software up-to-date.
View 9 Replies View RelatedKMix 4.6.0 in OpenSUSE 11.4 (x86) doesn't show up channels. It only shows "Internal sound Analog stereo" So I can't set the input/output channels and the headphone channel for my soundcard. The right soundcard drivers are installed (for Creative Sound Blaster Platinum Live Drive). Earlier versions of KMix worked just fine.
[Code]...
I'm using openSUSE 11.4 KDE 4.6. In system monitor KMIX is using 100% CPU power why is this. It's a new development hasn't happened before.
View 2 Replies View RelatedHow do I get it to play MP4 and WMV files. Currently it only plays AVI. I haven't done anything to the setup except perhaps update automatically. It has been working well till the last week.
I click on the file and it does not load. No error messages. I am using the XV output driver.
the movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View RelatedI have my Acer Revo R3610 PC connected to my LCD TV through HDMI. The sound works but I cannot control the volume from Kmix. I've added the IEC958 channel to the channels in Kmix but it doesn't provide a slider for it. Only a mute. The master volume slider has no effect at all. Is there any way of controlling the volume when connected through HDMI?
I ran the alsa diagnostics script (/usr/sbin/alsa-info.sh) and uploaded it here.
Here is a quick summary of my Alsa version, sound module loaded and sound card details.
Code:
mediacentre@mediacentre:~> cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
mediacentre@mediacentre:~> cat /proc/asound/modules
0 snd_hda_intel
mediacentre@mediacentre:~> cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 20
Running openSUSE 11.3, installed a month ago, and the only change I did from the default install was to update to kde 4.5 (along with usual updates).Since the upgrade, kmix doesn't start. When I click it, I see the bouncy kmix icon, and a new slot is opened on the task bar which reads 'kmix', but it shows nothing, and after a minute or so it disappears, along with the kmix bouncy icon.No error is given, so I tried to run from shell. This time when I try 'kmix' it does nothing at all (doesn't appear in 'jobs').
View 4 Replies View RelatedIm running 11.3 w/ KDE 4.6. I was using Kmix today without issue and accidentally (perhaps out of curiosity) clicked the 'close' box on the tab which presented all of the volume controls. The thing is, I cannot seem to find out how to recreate it. I seem to recall there was some option to create multiple volume control tabs, but I cannot locate.
Could someone point me in the right direction on how to recreate the tab or delete the kmix settings/config which I assume would re-create defaults?
After a successful upgrade to lucid, everything was going GREAT (including FINALLY having surround output) until now all of the sudden music files won't play... When I double-click a file, Totem opens automatically, and it says it's playing,but there's no sound and the bar does not move across at the bottom. In VLC, the bar moves like it's playing, but there is still no sound. Doesn't work when I hover the cursor over a file, either. In previous versions of Ubuntu, a simple reboot would fix this, but that doesn't work with Lucid... Online streaming works fine.
View 7 Replies View RelatedI'm new to posting around here, but have used this forum for years and always have found a solution via search, but this time I couldn't find anyone with quite the same problem.
I've been using 8.04 on an old laptop for quite a while and have been able to watch encrypted DVDs, as I have installed all the proper drivers.
But suddenly, every time I insert an encrypted DVD, it will mount and I can see the name of it and browse the files, but neither MPlayer nor VLC will play it.
I know the drive works, because if I boot into XP I can watch them there.
I already tried reinstalling the drivers and am out of ideas.
Since I was change my mainboard and sound chip of course kmix doesn't work, I can change the volume but it doesn't effect on output volume it look like kmix have 3 level, Mute, Low and high.
View 9 Replies View Relatedwhen trying to play songs purchased off of iTunes I don't want to be limited to having to watch them through Virtualbox.how to get vlc or mplayer to play .mp4 videos in Ubuntu 9.10? I've got vlc 1.0 and trying to convert them using ffmpeg didn't work, I keep getting the following error.
swScaler: Unknown format is not supported as input pixel format
Cannot get resampling context
When i try to play HD (even with 720p) video the CPU load is almost 100%. I'm using vlc player and the movie is barely watchable. If i switch to Movie Player, the CPU load is slightly decreased, but after 2-3 minutes the audio goes out of sync, so no solution there. I have an nvidia 8600gt graphics card and the proper driver installed, every compiz effect works flawlessly without the slightest increase in CPU load and a dual core 2,1 GHz AMD processor. It shouldn't be a hardware issue.
View 4 Replies View RelatedI am trying to burn a video DVD created from "Devede" with K3B. The video DVD successfully burns, and plays in my computer, but does not play in any of the DVD players in the house. I used to user "ConvertXToDVD" when I was on Windows, but am trying to find a free/open source alternative on ubuntu. I am using all default options. I have looked in the settings for both programs, and I fail to see the problem here. Even the ISO created from devede seems to match up to the Video DVD (that works in the players) I had burned with ConvertXToDVD.
In Devede I have it so that the menu is disabled and it automatically plays the first title. Apparently this is not good enough.. I thought this program was supposed to be easy to use? What am I doing wrong here? I am using the same DVD-R I have used before on my Windows machine to great success. I am getting frustrated as I have went through 2 DVDs,
If I try to download a video for later use Ubuntu streams the video instead. How can I get around this?
View 8 Replies View RelatedI'm not getting audio when I play a video file.
Code:
mplayer Naruto/Naruto Shippuuden - 185 v2.mp4
MPlayer 1.0rc4-4.4.5 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing Naruto/Naruto Shippuuden - 185.mp4.
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
[code]...
When I try to play any music or movie file over my network....VLC or any other player gives me errors. I don't have any problems when I copy movie files directly to my hard drive from my network. This is on Debian 8 if that information is of any relevance here...
Here is the error I am faced with...
Code: Select allYour input can't be opened:
VLC is unable to open the MRL 'smb://gfstorage01/wolf/Torent%20Downloads/Olympus%20Has%20Fallen%20(2013)%20%5B1080p%5D/Olympus.Has.Fallen.2013.1080p.BluRay.x264.YIFY.mp4'. Check the log for details.
This is true for .flv, .avi, .mov, and .mp4, at least. This is true in both vlc and movie player. Thumbnails generated from frames in the videos appear correctly in nautilus. Videos play fine in firefox, on ....., but I downloaded one as an .flv and then it had the same problem. I have restricted extras freshly installed. My "Ubuntu 9.10 - the Karmic Koala" system is fully updated. I've found several other forum posts about the same kind of problem, but I couldn't find anything helpful in them (like that the contrast setting might be WAY out of whack, which it wasn't, or that nvidia drivers needed to be updated or reinstalled, which I don't have anyway, etc).
View 2 Replies View RelatedWhen I play some video file, like some series (.avi), my system often freezes, the image become static and the sound starts looping. Ctr+Alt+Del does nothing and the only way to shut the computer down and restart the system is by holding the power button down for a long time. I've already searched the web for this problem but I find nothing. I have a Asus UX-30 with an Intel GMA X4500MHD.
View 5 Replies View RelatedMy problem is that my computer plays MTS videos very bad (the videos get freeze, etc) in Ubuntu 11.04. I tested many players, but I didn't get good performance during the playback in any of them.
However, in the same computer, I use K-Lite Codec Pack in Windows XP and MTS videos are fine!
Is there any way to play MTS videos in Ubuntu very well?
Performance is excellent in both operating systems (XP and Ubuntu 11.04).
I have to use Chromium to play videos on youtube and other sites. Using iceweasel i have video but no sound. If I hit F5 (refreshing site) then I have sound, but nov video.
I made a alsa-base.conf following the instructions in this topic [URL] .... without success
Code: Select alllspci |grep -i audio
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
Code: Select allaplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: ID 60 Digital [ID 60 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm using Ubuntu 64bit 10.04 with FireFox and every video I've tried online has worked except the bp.com's oil gusher video streams. Does any one know what plugins to install to make this work?
View 2 Replies View RelatedI have an ATI 4650 HD and using flgrx via jockey, on 10.10.X becomes unresponsive when I play flash videos inside a browser. The image freezes, and the audio track loops, with a loop length of around 0.5 seconds. The only thing I can is reboot my computer. The xorg log file contains no indication that something went wrong. The last entries in it are the monitor display modes.
I cannot switch to the open source ATI driver, as my monitor screen goes blank after booting.I have tried a fresh system install, but that hasn't worked either.
