I have Ubuntu 9.10 with GNOME and KDE and again no sound. I simply logged in to GNOME and then to KDE.Is there any simple(!) way to fix sound problems under Ubuntu once and for all? Since more than one year I have sound issues. Tried all the solutions from the forums or wikis.This is really annoying...So, my idea is to use only one way (PulseAudio? Alsa?) to have sound, is that possible somehow?
View 3 Replies
I got a problem with gnome-subtitles when I try to sync an srt file with an mkv file: no sound available, whereas in the case of an avi file no problem of course. Did you experiment the same problem and find a workaround?
View 1 Replies View RelatedI am looking for an alternative to gnome-sound-recorder (2.28.1).
I need the option of pausing the recording, and then continue into the same file (appending), so that I can take notes as required
I am using OpenSuse 11.2 + Gnome
After following the message "check your multimedia problem in ten steps", I still have no sound.code...
Is there a way to control the gnome sound preferences widget via the command line? I use optical digital out (IEC95. It works fine. but everytime I reboot there is no sound, I have to go to sound preferences, hardware tab, select my internal audio device, change it from digital stereo duplex to analog surround 5.1, then back to digital stereo duplex, and then the sound works again. I would like to be able to do this via command line so I can write a little startup script and not have to do that every time i reboot.
View 4 Replies View Relatedi have a fresh installation of opensuse 11.2 32-bit. my soundcard is terratec ewx 24-96. the card is detected in yast, and i can play test sound from the yast/sound panel. all volume sliders are set to maximum values (i have also double checked it in alsamixer).
i *can* hear the sound when doing this test from the gnome terminal:
speaker-test -dplug:front -c2 -l5 -twav
however to make this test work:
speaker-test -c2 -l5 -twav
i had to remove the asound-pulse.conf file. after removing this file the second test (speaker-test -c2 -l5 -twav) works. removing this file also solved the problem of missing sound in videos videos played in firefox. the original contents of the asound-pulse.conf file was:
pcm.pulse {
type pulse
}
ctl.pulse {
[code]....
the problem is i can't play any audio files (.wav or .mp3) in banshee.
i am sure the .wav file i use while testing is ok as i can play it with aplay.
when i try playing the .wav file, banshee does not complain about any missing codecs. the slider moves as the file is being played. i have also started banshee with the --debug option, but there were no errors in the output.
so my guess is that banshee is playing the files, it's just that it sends the data to the wrong device/channell or whatever it is.
all of the gstreamer packages i have installed are from the packman repository.
when i run gstreamer-properties, the only setting on the audio tab that gives me sound is: alsa (for the plugin) and default (for the device).
I can, on rare occasions, login to my gnome desktop with the sound theme enabled, but it usually crashes back to gdm while I'm still looking at the ubuntu logo. It does a resolution change, and I thought that might be my problem.
Then, my son noticed that, on those rare occasions we get into the desktop,the gnome-session crashes whenever a system sound plays.
I disabled the Ubuntu sound theme in failsafe mode, then could login to the normal gnome session.
This isn't the only machine that does this, and the other has the same model of motherboard, the ASRock 4CoreDual-VSTA. code...
I want to record a streaming-audio (not capture), to use an alarm sound. I opened up gnome-sound-recorder, but I don't see input drop-down menu. I tried Audacity, but it's missing the menu, too.I saw the specification sheet of my laptop, but it only says Mobile Intel� GS45 Express Chipsets, I'm not sure if it manages sound, too, but the sheet doesn't have any information about sound chip set.dd: It seems like I can't change this to 'solved'. I cannot say it is solved, as I don't yet see the drop-down menu in gnome-sound-recorder, but with PulseAudio I can perform the task, so it can be regarded as solved?
View 1 Replies View RelatedAre there any sound schemes for GNOME and MATE? Like different system sounds and a logon-logoff sound and a system sound for when I empty the trash bin? Like the way Ubuntu does, just with different sounds. I'm not that crazy about Ubuntu's system sounds.
I know I don't need it, I think it would just make a nice addition to my laptop and later my desktop.
I have a strange problem with sound, or maybe It's ok, I dunno. The problem is. The first launched program that uses sound, "takes over" the sound or smth, anyway, all programs, started next, just not play sound at all. The only solution is to close all programs using sound and start one I need to "listen". When I get into sound settings menu and see the list of programs using sound, I see just one started first.
View 1 Replies View RelatedI just did a fresh install of openSUSE 11.3 32bit GNOME on my notebook and everything runs fine...yet
But there is an issue with the sound playback on mp4's and quicktime (apple trailers) that I was not able to fix.
I added the Packman 11.3 repo via Yast -> Software Repositories -> Add... -> Community Repositories
Then I used zypper to get the related gstreamer-plugins ffmpeg faad vlc w32codec-all libmp4v2...
So far the media playback seem good, except the issue of "no sound with gstreamer related media players on quicktime and mp4"...
I set all available/related/installed packages to "Packman" (Yast -> Software Management), did zypper refresh + zypper up but I am simply not able to get sound from gstreamer...It works fine in VLC though!
Some google and forum research showed that it's an issue that has occurred over the recent years but I could not found a proper working solution.
If I run totem from the terminal I get the following output (plus a windows asking for permission to search for the required codec 'MPEG-4 AAC Decoder'...but it is not able to find one!):
Code:
# totem --debug --play TV-20100717-2030-1301.h264.mp4
(totem:6888): Totem-DEBUG: Received SaveYourself(SmSaveLocal, !Shutdown, SmInteractStyleNone, !Fast) in state idle
(totem:6888): Totem-DEBUG: Setting initial properties
(totem:6888): Totem-DEBUG: Sending SaveYourselfDone(True) for initial SaveYourself
(totem:6888): Totem-DEBUG: Received SaveComplete message in state save-yourself-done
(totem:6888): Totem-DEBUG: totem_playlist_add_one_mrl (): TV-20100717-2030-1301.h264.mp4 (null) (null)
code....
The last Message is interesting "All missing plugins are blacklisted..." hmmm I did not blacklist any plugins...where can you see these blacklist? Is that the point, the plugin is there but blacklisted?
I am runnig Jessie with the default GNOME. Every thing has been perfectly smooth, but for the audio line in. First you should now the same hardware was working well with Wheezy. Then the hardware card is RealTek ALC887-VD and I am using the analogic part (both for in and out lines).
Below I will write some command results, but first, it seems important to describe the problem. I can hear the audio line in. If I blow in a mic, I definitelly hear the sound of it in the output. With alsamixer I can toggle the line in level and it works fine. By the way, with pavucontrol, it is the same I have access to the line in. but when I look in the Gnome setting for the sound, input, no card is available, then no volume setting is available.
--> as a result, I can't record the sound from the mic. it is sent directly to the output without been taken into account in the system. So no comment on video making, no skype …
On the web, the problem is always "no sound with this card" "No sound after upgrade to Jessie"… but Card is working fine but no seen on a upper level…
Code: Select allroot@Desktop:~# lsmod |grep snd
snd_hda_codec_realtek  67127 1
snd_hda_codec_generic  63142 1 snd_hda_codec_realtek
snd_hda_codec_hdmi   45118 1
snd_hda_intel     26327 12
[Code].....
In Gnome and XFCE I always have a choppy music playback. The music is never played smoothly. There is always hesitations in the playback, as if the CPU is running on 100% and cannot cope with the system load.
One of the reasons for that is (in my case) Pulseaudio.
Another reason is Gstreamer. When I choose Gstreamer as backend in KDE, I get the same choppy musicplayback as in Gnome or XFCE. With Xine as backend in KDE, everything is fine. So my conclusion is: with Xine, the sound would be fine in Gnome too.
So, I wonder if it is possible to use Xine as backend in Gnome too. Does anyone have experience with running Xine in Gnome and/or XFCE? What do I need to do to set Gnome/XFCE, so that it uses Xine instead of Gstreamer?
Or is there maybe a special setting, I have to apply? In gstreamer-properties I have tried all possible settings, but this didn´t change anything to the quality of sound.
My experience is also: this choppy sound is hardware-independend. It doesn´t matter which hardware I use, the sound is choppy. It is also distro-independend. The sound is choppy in openSUSE (gnome and in KDE with applied Gstreamer backend), in Ubuntu, Xubuntu, Fedora with Gnome, Linux Mint with Gnome.
I have problem with VLC player. The problem, from the image below, appears whenever I open video file. I click Ok, and a everything is ok, until I jump to another time sequence, when sound and subtitles disappear.
Terminal log:
I hear no login sound when I login to my ubuntu. I checked at startup applications and found GNOME login sound is enabled. The command used there is
Code:
/usr/bin/canberra-gtk-play --id="desktop-login" --description="GNOME Login"
.
Its not only this, but there is no other sounds enabled - for mouse clicks etc
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.
my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:
[Code]...
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies View Related
