I have Kaffeine version 1.1 and KDE 4.4.4 release 2 installed on OpenSUSE 11.3. During watching video in Kaffeine the powersave will start and after 30seconds will switch my computer off. When I watch video in Xine I do not have this problem (screen saver timeout is set to 10 seconds). I have not found this option in xine-config.
View 1 RepliesI am running openSUSE 11.1 on a Pentium Dual Core 2.5 (E5200) Processor, 2GB RAM and an NVidia 8400GS PCI Express display card.When I intitially installed my system I also installed VLC media player, at that time it was version 1.0.1, Mplayer and SMplayer a few codecs for K3B, handbrake for DVD ripping etc. That was also the only time since my computer has been online, i have never updated it since. And it had no problems whatsoever. Among other things I use my system to watch DVD's. I watched many DVD's and video clips flawlessly.
Now all of a sudden when watching DVD's and video clips the DVD playback flickkers red (the color red). I am not sure what causes it and it is very irritating. It flickkers even more with video clips. With a DVD it dissappears after a while but as soon as you move your mouse pointer or click on the screen it starts to flickker red again.I thought it was my NVidia card that might be faulty, but I booted up from a Puppy linux live-cd and I played a DVD from there and it works 100%.
I can't open some of the video Clips in Internet in Ubuntu (using Mozilla FireFox), which I can open in Windows. What I can do.
View 1 Replies View RelatedHow to watch video with two subtitles(different languages) simultaneously?
View 5 Replies View RelatedI'm just getting started with Ubuntu 64-Bit. Basically, I have Totem Movie Player and VLC Media Player installed and every time I watch a movie in either one of them. If I tab out of them or minimize them, when I bring the media player back up the screen is black. The sound still works perfectly but I can't see the movie and I've tried several media players out and they all do the same thing. Basically I can't multitask or bring up anything else while I watch a movie or I have to restart the player because of the media screen going black.
I'm not sure if my computer specs will help but here they are:
Ubuntu 10.04 Lucid 64-Bit
Intel Xeon X3210 2.13GHz Quad
4GB DDR2-800 RAM
ATI Radeon 4870 512MB Videocard
When I try watching HD or avi files with totem the sound and video skips then equalizes on its own, when I try in vlc same thing but I play with the sound until video and sound sync but there is slowness in video.mplayer won't start. I installed the gmplayer front end and I just get that but no video or sound, video won't play.
View 4 Replies View Relatedi tried kde settings: disabled screen saver, disabled monitor power management. nothing worked. even i tried to find something in yast -- no luck. actually screen goes black after about 10 mins of inactivity which is annoying while watching in ex. videos. playing kaffeine is ok - i think it's because kaffeine makes "fake mouse movements". suse 11.3, linux 2.6.34.4-0.1-default x86_64, kde: 4.4.4 (kde 4.4.4) "release 2". adm athlon dual core 4450e (2.3ghz), 2 gb ram, geforce 9600 gso 512 with nvidia driver.
View 5 Replies View RelatedI installed Xubuntu 10.04 on an old HP and I decided to swap the hard drive to an Old Dell Dimension 2300. Once I did that I logged in and continued to do stuff. I got a few Instant messages before I noticed I had no sound. I tryed to watch a video and I get the same result. I typed the following;
[Code]....
I run LXDE with Openbox as WM on Fedora 15. When I watch videos with Totem or VLC, the monitor doesn't register any activity, and goes into power saving mode (goes blank) after a certain amount of time (about 10-15 mins). How can I prevent this from happening? (I just switched over to Fedora from Arch, using GDM and Openbox. I didn't have this problem on that installation, so it's probably not hardware related.)
View 1 Replies View RelatedI was in the middle of watching a video when the sound stopped working.
View 1 Replies View RelatedMy system froze when watching a flash video and I had to do a hard reset. Now when I boot into ubuntu I can't open the software centre or the update manager. Is there a way to check what's wrong or a way to reinstall everything from terminal? Synpatic still opens and works.
View 1 Replies View RelatedI have recently been experiencing some issues with the powersave on my computer. I had my computer set to put the display to sleep after 10 minutes and put the computer to sleep after 30 minutes. The screen saver also activates at 5 minutes. When I woke up my computer (hit the power button) the computer would sometimes tell me that it was going into low graphics mode. I had to reboot to get my x server back. I disabled the power save to fix the problem, but I would really like to have it back. My latest Xorg.log gives an error, but I'm not sure if the power save caused the problem (more below). I am running a computer with an Intel Integrated chipset.My questions:
What caused the x server to crash?Should I post a bug report on Launchpad? If so, how? (im a bit of a noob as far as bug reporting)How can I fix the problem?Xorg.log:
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
[code]....
Why does flash crash my system when I'm watching a video online? I'm fairly certain that it's flash.
View 4 Replies View RelatedMy system just freezes randomly. It happens about once a day, which is really often imho. It usually happens when I'm watching a video in fullscreen and it suddenly stops. I can't alt-tab or escape out of fullscreen, my mouse doesn't work and the keyboard is unresponsive. I'm forced to restart by pressing my computer's power button. This happens in both vlc and kmplayer and it also happened a few times when i was not watching a video. I was just on firefox, browsing the internet.
View 3 Replies View RelatedI'm new to Ubuntu but I installed Ubuntu 11.04 with no problems. I activated the recommended drivers for my laptop. My laptop is: Acer Aspire 7540G with ATI Mobility Radeon HD 4570 video card and AMD Athlon II X2 processor. So the problems comes very very often. I watch videos on fullscreen or I leave them playing in ...... While playin a video the laptop just freezes. Everything stops working. I think this problems comes up may be every 30-40 minutes of watching a movie. I'm not a fan of holding the shut down button for 10 seconds every 40 minutes so I'll be very grateful if someone helps. I've removed Syn to Vblank from the CompizConfig because otherwise Ubuntu runs really slow on my computer and the videos are playing very slow and with very bad quality. When i removed it everything began to run faster but now I've this problem with the freezing... Any ideas ?
View 5 Replies View Relatedi have for pc connect to my hdtv and sometimes it blinks alot.it like someone is changing the channel. it does it the most when i'm watch a video in movie player. i thought it was just movie player but it does it when vlc player too. oh and it does it too with the nvidia drive on way more.
View 4 Replies View RelatedI have been trying out the new Slackware 13.37 and I have found that KDE will crash anytime I am watching a full screen video with Firefox 4 and attempt to adjust the audio levels using the keyboard buttons. If I use the mouse to adjust the audio level through the audio mixer gui, it seems to work fine. Both of my laptops ( a Gateway MP6954 and a Dell Inspiron 1520) are exhibiting this same problem. Both have the Adobe Flash Player version 10.2.159.1 installed.
View 1 Replies View RelatedFrom time to time system freezes with no particular motive but most often when watching you tube video in full screen mode. How to diagnose freeze, hang, blocking problems in debian jessie system amd 64 gnome 3?
View 2 Replies View RelatedI have a really strange X (?) problem. My physical setup is:
Dell Optiplex 990
VisionTek 210 nV DMS59 PCIe video card (with a DVI splitter)
dual Dell P2411H monitors
I'm running OpenSuSE 11.4 (x86_64 fully patched) with the current nvidia drivers and kernel module. I'm running KDE and kdm in case that matters.
If I power off the two monitors, and then power them on again, the right monitor will come back on. The left monitor (which is the primary one... it's the one where the login screen appears when you are first logging in) reports that it is in power save mode. Wiggling the mouse, typing, etc., do not wake it up. The only thing that wakes it up is the detach the DVI cable from the monitor and reattach it (and sometimes it takes a couple tries).
I have used two (identical) video cards and splitters, and the problem occurred with both, so the problem doesn't appear to be with either of them. I also swapped monitors, but after the swap, the problem still occurred on the left monitor, and the old left monitor (which was now right) came on fine, so it doesn't appear to be a monitor problem.
I'm baffled. For now, I just won't turn off the monitors (or at least not the left monitor).
How can I force my Intel Atom N280 to work on powersave mode?
View 1 Replies View RelatedOpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
I recently bought a Samsung LED TV C5000 40", and I'm trying to watch an .mkv file from my pendrive, but it says, "Not Supported Video Codec".
I saw in the TV's user guide and it says it supports .mkv.
I don't know how to get the info about the mkv, but using "themonospot" I got:
- SubtitleTrack01 [eng]S_TEXT/UTF8
- VideoTrack01 V_MPEG4/ISO/AVC (1920x816)
- AudioTrack01 [eng]A_AC3- 48000 Hz - 6 channels
[Code]......
I have a PVR-150 for recording TV shows.
I can record shows using this command:
Code:
cat /dev/video0 > /mnt/raid/show.mpg
I can watch the show.mpg file while its recoding using VLC, Xine, Mplayer... pretty much any video player.
This is nice because i can pause, rewind, and fast-forward live TV, just like all the commercial DVRs out there.
The problem with this method is returning to "Live TV" mode. When using a commercial DVR, when you are fast-forwarding and reach "Live TV", the player stops fast-forwarding and begins playing the live TV in real-time. When doing the same thing with Xine or VLC, the player simply stops when you reach the EOF.
Is there a player that mimics this? When it get close to the EOF, it switches from Fast-Forward to play?
I used to have MythTV, but it way too bloated for what I want to do.
I have a DVB-T (USB) card on a Debian Lenny EEE nettop PC. This works fine.I'd like to know if if it would be possible to use the DVB-T stream over a http server.I mean I'd like to be able to select a channel from a web page and to view it from an embedded player in this page.I do not searching a streaming solution. I'd like all is done on server side.Does anyone know if it is possible and how to achieve this?
View 1 Replies View RelatedSomebody know some software for watching satellite tv on pc (linux)? For windows and mac is all bunch of software (e.g. one small list is on [URL]), but for linux I found just two (not available for South America and "just" with few hundreds channels).
View 6 Replies View Relatedi use ubuntu 10.04 and I want to watch a .mkv with softsubs from right to left. I tried : totem vlc MPlayer SMPlayer with no luck. I am pretty sure I got it working on 9.10 cant remember how?
View 9 Replies View RelatedI found this old LifeView FlyTV Platinum card, put it in the computer and tried to make it work with Ubuntu. It gets recognized with
Code:
But this is where I'm stuck. I know this might sound stupid, but, what now?
It is in, but what do I have to do to actualy watch TV? Is there any program for that that I have to install? Any more configuring to do? I can do anything, it's not a problem .
I transfer avi files on my usb drive to watch on my xbox. I have Ubuntu 9.10. When I watch the movie their are parts that skip or look messed up and sometimes freeze. When I transfer the avi files to my usb drive I do have a lot of other programs running so that could create problems when transferring the files. But it shouldn't right?
View 1 Replies View Relatedi have set the display to go to sleep after 5 min. but it still goes to sleep when i am watching movie.
how can i stop this, it should only go to sleep when it is ideal, not when i am watching movie
I just installed Ubuntu 10.4 today... but I�ve got a weird problem...
When I want to play an official DVD, Mplayer and VLC start and close down immediately..
When I want to play a movie from my HDD I get this (see attachment) with Mplayer and with VLC..Totem just doesn't want to play it..
but whats really weird is when I make a screenshot using VLC even though the colours are weird the screen shot comes out normal