OpenSUSE Multimedia :: When Watching DVD's And Video Clips / DVD Playback Flickkers Red
Dec 7, 2009
I am running openSUSE 11.1 on a Pentium Dual Core 2.5 (E5200) Processor, 2GB RAM and an NVidia 8400GS PCI Express display card.When I intitially installed my system I also installed VLC media player, at that time it was version 1.0.1, Mplayer and SMplayer a few codecs for K3B, handbrake for DVD ripping etc. That was also the only time since my computer has been online, i have never updated it since. And it had no problems whatsoever. Among other things I use my system to watch DVD's. I watched many DVD's and video clips flawlessly.
Now all of a sudden when watching DVD's and video clips the DVD playback flickkers red (the color red). I am not sure what causes it and it is very irritating. It flickkers even more with video clips. With a DVD it dissappears after a while but as soon as you move your mouse pointer or click on the screen it starts to flickker red again.I thought it was my NVidia card that might be faulty, but I booted up from a Puppy linux live-cd and I played a DVD from there and it works 100%.
View 5 Replies
ADVERTISEMENT
Jan 23, 2010
I can't open some of the video Clips in Internet in Ubuntu (using Mozilla FireFox), which I can open in Windows. What I can do.
View 1 Replies
View Related
Sep 15, 2010
i tried kde settings: disabled screen saver, disabled monitor power management. nothing worked. even i tried to find something in yast -- no luck. actually screen goes black after about 10 mins of inactivity which is annoying while watching in ex. videos. playing kaffeine is ok - i think it's because kaffeine makes "fake mouse movements". suse 11.3, linux 2.6.34.4-0.1-default x86_64, kde: 4.4.4 (kde 4.4.4) "release 2". adm athlon dual core 4450e (2.3ghz), 2 gb ram, geforce 9600 gso 512 with nvidia driver.
View 5 Replies
View Related
Jun 11, 2011
I would like to remove the audio tracks from various video clips (.avi, .mpg. .wmv, .flv, etc.).I Googled and found lots of ways to strip off the audio and save that sound as an mp3 file, but I have found nothing that would allow me to remove the audio and save my video clip (silently)
View 5 Replies
View Related
Oct 16, 2010
I have Kaffeine version 1.1 and KDE 4.4.4 release 2 installed on OpenSUSE 11.3. During watching video in Kaffeine the powersave will start and after 30seconds will switch my computer off. When I watch video in Xine I do not have this problem (screen saver timeout is set to 10 seconds). I have not found this option in xine-config.
View 1 Replies
View Related
Jul 14, 2011
I have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies
View Related
Mar 14, 2010
I just finished trying to install the codecs for various audio/video playback (Restricted Formats/11.2 - openSUSE - Community) and now I can play flash, mp3s and such but most of the video playback is very jittery and is not watchable. I have now tried it with mplayer and kaffine but still the same. I had this problem before as well and even tried VLC but no luck. I had thought I could just add the Nvidia repository and type in my graphics card, install and be done with it but no such luck (nothing even comes up when I type geforce).
View 4 Replies
View Related
Apr 3, 2011
Whenever I play a video via vlc or kaffeine and I switch to full screen I get lag. If I move my mouse to show the controls it plays perfectly. How can I fix my full screen playback issues?
View 9 Replies
View Related
Jun 7, 2011
I have a video which I've edited to my satisfaction but when I click play it seems to only play the first clip of video. How can I merge all my clips so it will continue to play through the whole thing?
View 7 Replies
View Related
Jan 25, 2010
Installed clean new 11.2-32 bit. Followed the restricted formats post. Kaffeine, vlc, and Mplayer present a blue screen with sound or shutdown immediately. Recommended diagnostic steps as follows:-
linux-yeq6:/home/ingrid # LC_ALL=C zypper ve
Retrieving repository 'Updates for openSUSE 11.2-0' metadata [done]
Building repository 'Updates for openSUSE 11.2-0' cache [done]
Loading repository data...
Reading installed packages...
Dependencies of all installed packages are satisfied.
code....
View 2 Replies
View Related
Jun 20, 2010
I just installed openSuse 11.2 KDE in a laptop and a desktop. On the laptop, SMPlayer worked very well with "rmvb" files. On the desktop, video its shown with no audio; using Kaffeine, both are played (sound and video) but are a bit out of sync (it happens in both, the laptop and desktop).
View 2 Replies
View Related
Dec 1, 2009
I've got a problem with my VLC MediaPlayer (v1.0.3-GoldenEye). During video-playback, my screenbrightness is turned to zero after approx- 30 seconds of playback. After turning the screen brightness to high again, the same thing starts over again. By now, I encountered that changing screen resolutions (e.g. after closing a fullscreen application with a different resolution) also turns my brightness to 0.
View 1 Replies
View Related
Jul 7, 2010
I recently installed Ubuntu 9.10 and I've been having problems with flash player. The problem occurs when I'm trying to play a video clip on You Tube or on similar sites. Video clips do not play properly, videos run slowly and with many interruptions, while on the other hand the sound is excellent and my internet connection is OK, only the quality of the video is poor.
I am using:
intel celeron 1800MHz
512 SD ram
ATI Radeon 9550
Hardware Drivers displays no drivers for my graphic card...
View 2 Replies
View Related
Feb 13, 2009
I am trying to make a demo of Sauerbraten for a friend of mine. I would like a short video clip of playing Sauerbraten, however I don't know how I can do this. Is there a program you download?
View 9 Replies
View Related
Feb 23, 2010
How to watch video with two subtitles(different languages) simultaneously?
View 5 Replies
View Related
Jun 15, 2010
I'm just getting started with Ubuntu 64-Bit. Basically, I have Totem Movie Player and VLC Media Player installed and every time I watch a movie in either one of them. If I tab out of them or minimize them, when I bring the media player back up the screen is black. The sound still works perfectly but I can't see the movie and I've tried several media players out and they all do the same thing. Basically I can't multitask or bring up anything else while I watch a movie or I have to restart the player because of the media screen going black.
I'm not sure if my computer specs will help but here they are:
Ubuntu 10.04 Lucid 64-Bit
Intel Xeon X3210 2.13GHz Quad
4GB DDR2-800 RAM
ATI Radeon 4870 512MB Videocard
View 2 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
Oct 9, 2010
When I try watching HD or avi files with totem the sound and video skips then equalizes on its own, when I try in vlc same thing but I play with the sound until video and sound sync but there is slowness in video.mplayer won't start. I installed the gmplayer front end and I just get that but no video or sound, video won't play.
View 4 Replies
View Related
Mar 11, 2011
When I play a video in Totem, MPlayer, VLC or whatever, my displayed windows will look transparent in a funny way. Letters are not readable, colours get distorted and images with a black background (colour 0) will display the partial video in it.
View 1 Replies
View Related
Oct 23, 2010
I'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop)
I've set nVidia setting to sync vblank and disabled it in compiz
I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
View 2 Replies
View Related
Apr 8, 2011
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
View 9 Replies
View Related
May 18, 2011
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
View 1 Replies
View Related
Jul 17, 2010
When I play videos in VLC, the video output seems to randomly freeze while playing the video. This does not effect the audio though. The audio output continues, but with the video frozen on a frame. This is happening in windowed and full-screen mode. I have to use "pkill vlc" each time twice then start VLC again. I have had to resort to mplayer for the time being. I am running squeeze. I was not experiencing this problem before though (started within the past week), so it must be due to some recent upgrade. I have tried "aptitude purge vlc && aptitude install vlc", but I am still experiencing the same problem.
View 1 Replies
View Related
Jan 15, 2010
I have a Dell Latitude CPi that has 400MHz Intel Processor and 256 MB of ram. It has a Neomagic Corporation NM2360 [MagicMedia 256ZX]. I have it set to 16 bit color depth and it is using the neomagic driver. My problem is that it cannot play any video of any size flash, or saved to hard drive. It has a fps so low that I can see it rendering each frame going across the screen. It doesn't seem to have a problem with animated pictures, just actual video files. I don't know whether or not this matters but the card set is known to not support 3d acceleration. I can run any commands in terminal and have a good understanding of the linux environment. This problem has occurred under Ubuntu and Xubuntu and still happens if I use a light weight WM like fluxbox.
View 2 Replies
View Related
Feb 21, 2010
When trying to playback DVDs in VLC media player, I have to switch the video output driver to get any playback.If I leave it on "Default" (which I think is defaulting to "XVideo Extension Video Output"), I get a solid green or blue screen (which I also get with "Xvideo Extension Video Output")If I switch it to "OpenGL Video Output", I get proper DVD playback but it is kind of pixelated and ugly.If I switch it to "X11 Video Output", I get DVD playback that is very crisp and sharp, the image quality is great.unfortunately, the colors are completely messed up and the blue is completely saturated.I've played with the color settings (especially the Hue setting), but I can't get the colors to look right.
I'd really like to use the x11 video output since the quality is the best, but I can't get the colors right.the first one (Screenshot.png) is OpenGL output, and the second (Screenshot-1.png) is X11 output.It's also worth noting that I am on an IBM ThinkPad R32 with an ATI Mobility Radeon 7000 (or M6, or M6 LE, whatever you wanna call it).I'm running a fully updated 9.04 Jaunty installation.
View 7 Replies
View Related
Apr 3, 2010
I've installed Ubuntu 9.10 and the prime reason for giving it a go is due to the media center capability with apps such as Moovida and LinuxMce.
Unfortunately during video playback [either divx or flash] there appears to be a random line or lines which flickers on the screen when the video is in fullscreen mode.
I'm using an ATI x1900 video card and have tried using both Tote and VLC, and I have also tried installing the fglrx.
But, both with and without flgrx installed, under the section 'Device' in xorg.conf it says that the driver is 'vesa'.
I don't know how to disable the default ATI driver to enable fglrx, or whether I am going off on completely the wrong tanget and should be looking at something else.
Or is there better support for my type of card in Ubuntu 10 as I don't want to go back to Ubuntu 8 which is the last supported version of the os that ATI developed a driver for my card.
View 1 Replies
View Related
Apr 26, 2010
I have a 30" LCD with 2560x1600 pixel resolution. I would like to make and play videos at this resolution, but software decode is too slow, and the GPU accelerated decode (VDPAU) maxes out at 2048 pixels. It might be possible to decode 2Kx2K and cut-and-paste and reorganize the rectangles to fill 2560x1600. But someday I plan on getting a 4K screen (4096x2160 pixels) and I would like to support that too. For that it seems two video streams decoded by two GPUs and exactly synchronized would work.
View 1 Replies
View Related
May 14, 2010
I have two Ubuntus installed. A 10.04 and a 9.04. In 9.04 if I watch a video in Firefox, it works very smoothly and nicely. Using the "top" command, totem-plugin-vi is using the most cpu time at about 16%, and xorg is using about 5%. But in 10.04, totem is using 72% and xorg is using 26%, and it looks really choppy. I think watching DVDs is the same way. I checked "Hardware Drivers" in the System->Administration menu (in 10.04) and it said "No proprietary drivers are in use on this system." I'm guessing maybe I'm using different video drivers on each system, but I don't even know how to check. and here is an excerpt from lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
View 3 Replies
View Related
