Ubuntu :: Watching A Video When The Sound Stopped Working?
Feb 23, 2010I was in the middle of watching a video when the sound stopped working.
View 1 RepliesI was in the middle of watching a video when the sound stopped working.
View 1 RepliesI installed Xubuntu 10.04 on an old HP and I decided to swap the hard drive to an Old Dell Dimension 2300. Once I did that I logged in and continued to do stuff. I got a few Instant messages before I noticed I had no sound. I tryed to watch a video and I get the same result. I typed the following;
[Code]....
When I try watching HD or avi files with totem the sound and video skips then equalizes on its own, when I try in vlc same thing but I play with the sound until video and sound sync but there is slowness in video.mplayer won't start. I installed the gmplayer front end and I just get that but no video or sound, video won't play.
View 4 Replies View RelatedThe sound stopped working on my Macbook Pro 1,1. It was working fine before, and I can't think of any changes I made that would make it stop working. I know it's not a hardware problem because the Apple sound plays when I turn on the computer. Everything is unmuted in ALSA Mixer. None of the hardware options in Sound Preferences produce sound. Plugging in headphones or speakers does not solve the problem. I'm using 10.10.One curiosity: Whenever I do something that would normally cause sound to play, the optical audio red light in the headphone jack turns on, but no sound plays.
View 2 Replies View RelatedI just installed Xubuntu on my old ThinkPad T40, and everything worked flawlessly until last night when I rebooted, and the sound stopped working. I'd rebooted it several times before with no problems.
View 9 Replies View RelatedAfter 2-3 months of working fine. I have a win7 box hooked thru a KVM switch to the same speakers and they work from there. I booted up a live CD (Mint Linux 10) on the non-working machine, and the speakers work fine.I checked and I have rights to "Use audio devices".I ran the following and got:
Code:
lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
[code]...
i upgraded to lucid, but now my video has stopped working... videos and iplayer work fine. the problem is with any videos (mp4, flv) opened in vlc or mplayer. i can hear sound fine but the screen is black. the same happens in skype. i followed the comprehensive guide and did all the steps, but no joy.
View 3 Replies View RelatedI have a ASRock and Ubuntu 10.10. Everything worked fine till I had a short circuit. I started the computer, everything came up fine but the projector I have attached to the HDMI wasn't recognized anymore. I have a GeForce GT 425M and a Panasonic AE-2000 attached to it. The Xorg.0.log has following entries:
[ 12.838] (EE) NVIDIA(1): Unable to find available Display Devices
for screen 1.
[ 12.838] (EE) NVIDIA(1): No display devices found for this X screen
Have been using Jaunty for a year now, but today my sound has stopped working. It works fine in windows which should eliminate any hardware problems. When I run a test through sound preferences I get to hear static.
View 1 Replies View RelatedLast night I was trying to get my printer working, and when I rebooted, I lost networking and sound.I am currently booting on a live CD, and sound and networking are fine-- so it can't be a hardware issue (obviously). I must have inadvertently broken something, but I can't figure it out.I have tried restarting networking, but it doesn't respond-- it says stop/waiting or something like that.I can't access the sound preferences-- it says waiting for sound to respond (or something like that).
When I reboot, sometimes I see a terminal window with the same line scrolling very, very quickly-- something about waiting for USB. Additionally, the system is very slow to respond-- clicking a menu item can take a long time for it to appear, etc.What could have occurred, and how might I troubleshoot it?
I have posted this in networking, but perhaps it should have been here. Can anyone give me a clue on how to get my networking to work again? I don't care about sound.Last night I was trying to get my printer working, and when I rebooted, I lost networking and sound.I am currently booting on a live CD, and sound and networking are fine-- so it can't be a hardware issue (obviously). I must have inadvertently broken something, but I can't figure it out.
I have tried restarting networking, but it doesn't respond-- it says stop/waiting or something like that.I can't access the sound preferences-- it says waiting for sound to respond (or something like that).When I reboot, sometimes I see a terminal window with the same line scrolling very, very quickly-- something about waiting for USB.Additionally, the system is very slow to respond-- clicking a menu item can take a long time for it to appear, etc.
Ubuntu and I'm using the latest stable version. Yesterday I had my sound working, but today my sound has stopped working.I've taken the following steps without success:System -> Administrator -> Hardware Devices (finds nothing)
Code:
sudo apt update
sudo apt-get update
[code]...
in 10.10 my internal audio and my external usb 5.1 soundcard worked fine, and everything was still ok after i upgraded to 11.04. i then tried to install an equaliser called "alsaequal" which required the alsa-driver-1.0.24 package, which i compiled ok. now i've lost all sound and can only see dummy output listed in sound preferences, and no hardware is detected.
sudo aplay -l doesn't detect anything either! i've folled all the steps on the sticky thread in multimedia, i tried purging and reinstalling all the alsa packages which didnt work, and then tried compilling alsa source packages, which wound up with errors. i was following this thread: http://ubuntuforums.org/showthread.php?t=1725874 which suggested running the alsa-info.sh script. i ran this and uploaded the output here:961380d1e9d23fi dont really understand any of this, but it seems to have detected my internal pci card but not my usb card.any help would be really appreciated after the hours spend fruitlessly trawling through these forums
I'm running 64-bit Ubuntu 11.04. I recently updated virtual box and wine. I also installed the expansion kit for the virtual box. Now Ubuntu doesn't read my sound card. I tried reinstalling alsa and pulseaudio but that did not help.
aplay -l shows no sound cards.
I have a Realtek ALC892 8-Channel HD Audio sound card.
i just upgraded to ubuntu 10.04 from 9.10. videos wont play in firefox anymore. ..... videos require 100% computing power and play at 1 frame every 5 seconds with choppy audio.
View 2 Replies View RelatedFollowing is the specification of my user environment.
Ubuntu 10.04 64-bit
Acer Aspire 5542
AMD Turion 2 X2 M500 (2.2 GHz, 1MB L2 Cache)
ATI Radeon HD 4200
4GB DDR2 Memory
500 GB HDD 5400 RPM
Sometimes, both on Gnome MPlayer and Movie Player, videos clips won't play. I use mainly MKV file format and quite often, AVI. I have also installed Ubuntu-Restricted-Extras.
The players will literally not play. When I scroll, it goes through the video clip as if I'm fast forwarding when paused, and then it would still be frozen.
I only use Gnome MPlayer and it's been working fine until like two weeks ago, and when it happens it's also the same for the Movie Player. The problem stays there until I reboot my laptop.
It's random but quite often and it's now doing my head in. It would be nice if any of you gents could give me a good solution without getting involved another player, because I really like Gnome MPlayer.
over the last couple of weeks, firefox has asked to be upgraded a few times. shockwave flash has also asked to be upgraded. sometime last week after upgrading shockwave flash all video stopped. so i have no videos, video in webpages just shows a grey box, with a light grey arrow.i have been very busy so i have taken time here and there to check the internet for solutions. there appear to have been problems with macs' and a lot of the problems appear to be from august 2009 onwards,am not sure it is the same problem.i am running opensuse 11.1mozilla firefox 3.6.10shockwave flash 10.1 r82 is enabled
code:
uname -a
gives me:
[code]...
I just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 2/2
[code]....
I installed kubuntu over ubuntu (both 9.10) this morning. in the past have had problems with suspending my laptop on ubuntu, so i tried on my new kubuntu. it entered suspension, but when i came back, all i saw was the login screen and the mouse. But nothing worked. It was just frozen. So i did a forced shutdown (held the power button down till it cut off). When i started it up again, there was no audio, no startup jingle. I restarted about 3 times.Here is the output of lspci:
Code:
blakefebruary7@ubuntu:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
[code]....
My sound in Lucid was working fine (for months), and then, for no obvious reason, it stopped working today. I get no sound from any application. I have no idea what could have changed on my system to cause this.When I re-boot Lucid, the login sound plays, and sound works briefly, but it always stops eventually after I login.I am overwhelmed by the large number of different Ubuntu sound problem fixes
View 9 Replies View RelatedI have two sound (or audio) hardware on my desktop computer. One is part of my computer motherboard and the other one is a sound card (CA0106 Soundblaster) I bought to replace the other one. When I first installed Ubuntu, my sound card was working properly after I made the necessary changes (system>preferences>sound), but after a few days it just stopped working and the sound from the motherboard is only working.
I reinstalled Ubuntu to my computer a few days ago, and my sound card was working again, but once again, it stopped working after a few days. How can I fix this?
I'm using Ubuntu and my sound was working fine and then suddenly it just stopped working.
It does however, have odd spells where its working (for like 2 minutes) but those spells are few and far between. So basically the sound is not working.
When it isn't working my speaker seem to be making these hissing/screeching noises.
I've tried looking up on Google on how to fix it, i.e. running terminals, etc. but still haven't come round to fixing it. Could someone explain to me how to fix the sound please?
And no, the speakers aren't on mute. I checked volume control and everything is full.
Summary:
Laptop: Acer
OS: Ubuntu 9.something
Sound card: hda-intel
Problem: Sound not working
Im running Ubuntu 10.10 and a couple of days ago, my usb sound deviced stopped working, possibly because of a recent update, as I didn't change something on my system as far as I can recall.My internal sound card still works just fine whatsoever, but my external devices,
E-MU 0202 USB
Logitech USB Headset
which also used to work flawlessly in the past, don't play audio anymore.Although they are still detected and selectable in the PulseAudio Volume Control.I can exclude hardware problems because everything is fine in WinXP.
I ended up upgrading my wine version to 1.3.20 before it was released to the PPA repos. I downloaded it via git, compiled & installed, but now it did not detect my drivers anymore. It even warned me when i ./configure'd it, but I didn't listen. I tried, also, remove purge all wine packages I own and reinstall them from Ubuntu, but the dud 1.3.20 version is still installed. Is there a way to bring the sound back? Or, is there a way to revert this installation and make me able to install 1.3.19 back?
The following message appears when I access the "Audio" tab @ winecfg:
Code:
Found driver in registry that is not available ! Remove 'alsa' from registry?
My sound stopped working today,
My sound info is all located here: [URL]
Sound was working just fine in my opensuse 11.2 install until recently. Now it looks like applications can't find the sound server. Under "Control Center" -> Sound it says "Waiting for sound system to respond" forever and doesn't go anywhere. In audacious it has error "alsa error No suitable mixer element found". Now my VirtualBox also gives an error about sound issue. All of these were working just fine early Yesterday.I installed bunch of updates given by YAST yesterday. Could something have messed this up? It is very annoying when sound system was working just fine before and now it suddenly doesn't! Sound like some from windows!
View 9 Replies View RelatedI have been using my HTPC OpenSuse 11.2 for for some months now and everything is great, I'm very happy that I made the switch to Linux. Today for some reason none of my avi files are able to play. When I try a DVD there is also no play back of the video. Sound is working but video is not there. I have tried Kaffeine, VLC, SM Player. All no luck.
Here is the output after checking with Red Dwarf's troubleshoot thread:
Code:
Recently audio stopped working in my flash video, when browsing in Chrome or Firefox, video is ok, but no audio. I don't know when did it stop to work. My system is SUSE 11.3 with all software up-to-date.
View 9 Replies View RelatedI've suddenly developed "no sound" at all- I use Logitech USB speakers and have been doing fine until this weekend when they simply won't play any longer. I searched and followed a bunch of different troubleshooting to no avail. I am running 9.10 with all the latest updates. I ran apt-get update and upgraded following this to be sure while doing this troubleshooting.
I went ahead and ran the also information script and the output is here: [URL]
The speaker lights are on so there is power getting there. I re-set the sound preferences to use the usb as output device and cranked the volume up all the way. This preference does not seem to stay between reboots or even when checking while troubleshooting this problem.
I recently installed ubuntu 10.10 (Maverick) on my new laptop. Sound was working just fine until today morning, when all of a sudden no sound would come out of my system. It is not a hardware problem as sound is working fine on windows.
View 9 Replies View Related