Thinking of installing Kimpanel plasmoid for Japanese input as an alternative to Skim due to it's unstable / incompatibility with KDE4. Anybody have any experience with it? Which anthy backend works best? scim-anthy or ibus-anthy? Install instructions at all or does it drag in all its own dependencies?
View 9 Repliesthey worked once (probably stopped late Aug), I am running KDE4 unstable, gnormalize, vlc, etc work fine so the cd reader is working and seen by the os when I run audex or k3b I get the errors below and the apps crash, I've searched and posted bugs but what I can't understand is why me and no one else (paranoia?), does anyone have any idea? if I try to view in Dolphin I get "the process for the audio cd protocol died unexpectedly". Common error seems to be "QSocketNotifier: Invalid socket 10 and type 'Read', disabling.
[Code]...
any incompatibility for an encrypted disk (i.e. impossibility of reading the file system) among different versions of the same distro or among different Linux distros.
View 1 Replies View RelatedI am using some unstable set of kde packages with opensuse 11.2-i586, at the moment the version number is
KDE 4.4.62 (KDE 4.5 >= 20100203).
That I have these packages is due to some misconfiguration / error, and I would like to replace them with something stable, say kde 4.4.1. I had a look into yast, found an option like "use these (kde 4.4) packages as system packages", but run into numerous compatability issues afterwards so that I can't make the switch.
So my question is: How can I replace the unstable kde 4.5 packages with kde 4.4.1? I don't know suse very well, so if there is some step-by-step description available somewhere
I'm rather new to Linux and haven't been on it for more than a week. I've been trying to find a Linux operating system that'd be compatible with my computer - I went through about 4 of them before finding openSUSE and really liking it. My main problem now, however, is that it seems to be rather unstable when it comes to running programs after a while. I've been on the computer for about 30 minutes for this session and tried using skype, for example. After about 5-10 minutes of using it, skype ended up crashing. There weren't any other programs open at the time either. After a while of doing anything, it usually lags up, taking about a minute to unstick so programs respond, and even gets to the point where it sometimes doesn't detect my keyboard strokes (though I think this is a separate problem that has to do with the disfunctional multimedia buttons - usually, after a minute or two, the typing begins to work again).
I've also noticed, however, that when trying to start up, the computer automatically goes to a 'start up options' screen where I can either boot in openSUSE normally or try the failsafe option. Is this normal? Usually, before shutting down or booting up, a black screen with white writing will flash by, sometimes followed by multicolored stripes before settling on the openSUSE log-in screen - at first this freaked me out and I'm still not sure if that means it's having an adverse reaction with the computer. The webcam doesn't stay disabled either after restarting, but I'm not sure if this is normal or not.
Has anyone else experienced these problems? The Windows Vista Home 64-bit that I had installed on my computer originally was OEM and I tried calling Gateway for help with the computer when something happened to the operating system that made it unable to connect to the internet regardless of what I tried to do (even the system diagnostics tool didn't help). I mention this because I'm wondering if the fact that it was OEM might have something to do with it? Or should I not try Linux at all on here and return back to Windows for this one? I've read around and a few people have said Linux is best working when installed by the manufacturer before purchase. Is this true?
After the problem with Vista, when I came upon the Linux OS's I was really intrigued, and I find I really like them especially for the fact that there's so much interaction with the terminal command prompt. I'd like to continue working with the openSUSE OS but does it sound like I should? or should I install the 32-bit version instead?
[Code]...
Is there any way I can install an older version of kde like the on on suselinux 10.1 because the newer desktops are very unstable on my computers. stuff closes, stuff freezes temperarly, fortunetly nothing perminent has happened yet but its been threating to abolish my computer. Ive had other cases like this end up making me reinstall my operating system and Id really like to just fix the problem before it happens. page down is overrun with this horribly lagging scroll.buttons look like there clicking occasionally and again it closes programs and has logged me out once already.
View 9 Replies View RelatedI am trying to install a SDK into my linux machine...but the GCC version used to build the kernel for that particular SDK on the target machine is different from the GCC version I am using. How to overcome this problem without any need for me to change my GCC version?
View 1 Replies View RelatedI have Sun grid engine running on a cluster of 6 machines running Lenny. Since Lenny will soon be oldstable, I tested an upgrade of one of these machines to squeeze. Almost everything is looking good except the grid engine client. Does anyone know whether gridengine-exec (6.2u5) in squeeze is compatible with gridengine-master(6.2-4) from Lenny?
I've purged and reinstalled the grid engine packages on the updated box, but the gridengine-exec daemon seems to crash when it attempts to contact the server. qstat error: failed receiving gdi request response for mid=1 (got syncron message receive timeout error).
When working in GIMP using a Wacom pen (which I do a lot), not all the lines I draw show up. Maybe every 1 in 5 lines, just don't show up, and it's like the brush outline freezes. This becomes pretty annoying when drawing, which is why I log in standard GNOME without effects when using GIMP.
There is a minor problem that I think may be related, and that is that sometimes when I open a windows in GIMP, such as the Save or Open dialog, I won't be able to click anything in it with my pen. I then need to click the canvas in the background, and after that everything works. It seems as though the brush is stuck on the canvas, which is similar to what happens when drawing. I've tried different compiz settings with vSync and others, but nothing that made this work. This also seems to only be a problem when using a Wacom pen, and not when using the mouse.
find a groupware solution that statifies KDE/Kontact and Thunderbird/Lightning users equally, I have stumbled upon a problem that appears to be Client related. While using Citadel, Thunderbird would sync its calendar using SyncKolab (IMAP-based) and Kontact would use GroupDAV. While Kontact worked perfectly, syncing with Thunderbird caused the calendar events to become 'invisible' to both Citadel and Kontact.
Now I am testing eGroupware, where Thunderbird sync's using CalDAV and Kontact still GroupDAV. Now events added by Kontact become invisible to eGroupware and Thunderbird when they are edited using Kontact... The Problem is hence in the way Kontact and Thunderbird handle their iCal entries (at least that's the only explanation I can come up with). Is there a known incompatibility between the iCal libraries of these two Clients? Has anyone had a similar issue? Is there a GroupWare solution that does not require me to setup a while network on a box (as in OpenXChange or Zarrafa) and still allows Thunderbird and Kontact to sync?
I have a problem with installing ubuntu 10.10 in my vaio cw. when I boot it , it doesn't show anything on my LCD but when I plug a monitor in , there would be an output. Also I have the same problem with 10.04 version.
View 7 Replies View RelatedI'm experiencing a wierd bug. Been having it for some time now. I haven't posted about it before since its only been annoying, but not really setting me back. And I have trouble defining and explaining the bug. Today it crossed the line into actual annoyance.
The bug occurs when I'm writing, using the keyboard on my laptop. Both when I write in browsers, like when writing this post, and when I write in openoffice. So its not limited to one program. In webbrowsers what happens is that all of a sudden the browser loads the previous page in the tab. Like I told it to go one step back. In OpenOffice something similar happens. The curser jumps up in the document.
I used to have this bug when touchpad-tapping was enabled. I have a habit of drumming my thumbs on the touchpad when typing. Therefore I've disabled tapping on the touchpad. The bug is reocurring, however I have not found a way to reproduce it. It might be a key combination I accidentally hit when typing away, but I'm not sure.
I searched every which way I could to find this out, but to no avail. Can anyone address this query?
View 9 Replies View RelatedDon't know what happens, but I cannot update to KDE4.5 Neither zypper nor yast seem to see what is in that repo, even with higher priority.
[Code]....
The restricted format FAQ sticky (Restricted formats - openSUSE) mentions a package called "kde4-k3b", but this doesn't show up in my listing. Which repository does kde4-k3b reside in? 11.2 KDE
View 7 Replies View Relatedif the original 11.2 iso will be reworked to include KDE4.4 SC.
View 3 Replies View RelatedI've been experiencing a strange problem with Plasma locking up. Running system monitor it shows the KDE4 process using 20% CPU time, and Plasma around 10-15%. This seems way too much since on my six year old Laptop the cpu load of both processes is barely noticeable. My Laptop is an old single core 3000+ AMD Athlon 64, while my Desktop has a Quad core Xeon 2.33Ghz chip, so the fact that the KDE4/Plasma system load is many times higher than on the Laptop, indicates something is wrong.
I'm not sure what else to look for troubleshooting wise, any suggestions? *Actually, thinking about it, the KDE4 process is timing out one CPU core, which indicates to me something is really not right.
I am hitting a wall here - with the new 4.4 installed and working well, the one thing that is killing me is not being able to read the active taskbar item or the plasma peanut menu (see screenshot. You can see that the firefox and gimp are "active" and too dark to read, while kwrite is inactive and readable.They are BOTH too dark, and I cannot seem to find the option that controls those color elements.
View 9 Replies View RelatedI got autostart working on 11.2/gnome, but I've switch to kde4.3.1. Duncan on the kde list suggested to manually save a session, but in the session manager there's not a clue how to manually save a session. In gnome I wrote a shell script to start kinternet, but the script has to start after smpppd. That script starts too soon in kde4.The reasoon kinternet doesn't start with the "restart on login" box, is a kde3 app. I have already tried kinternet --kicker, but apparetly kicker starts before smpppd. The script I wrote starts kinternet but with this error:
Error - KInternet Connection to local and remote server refused. Maybe smpppd is not running or you are not member of the group "dialout". Also check the server settings in the dialog "Various Settings". OK
The error to the calling shell looks like this:
Starting kinternet --kicker
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
buildsycoca running...
I worte somewhere in time here about this, but I cant find it.. I have a problem, when starting KDE, it begins to start applications, usually the ones that were open (thanks God)... however, order is a bit screwed... It opens Skype, KTorrent, Kopete, Sound, Keyboard and finally, NetworkManager...I would like to put Network to be ran 1st.
View 9 Replies View RelatedIn order to switch between dual head and single head, I need to log out of KDE4 and log in again immediately, which is annoying. How can I avoid that?
Is it possible to restart X without quitting KDE?
At work, when my laptop is docked, I use a dual head configuration (internal + 1 external screen), but at home I use the laptop without a second screen.
Using the binary nvidia driver, the laptop always selects the correct configuration upon booting (TwinView), but not upon hot-plugging.
I would just like to suspend the laptop and continue before/after commuting.
I've been running KDE4 with Suse 11.2 for about a year or so now, with no problems. Yesterday, the background to my screen suddenly went black. Open windows were unaffected, but I could see my theme, the task manager, etc. I couldn't open any programs other than the ones already open (and ones that they launch).This problem was system-wide, in that it affects all accounts on my machine.I thought I'd solved the problem after discussion with someone by email, by forcing KDE to recreate itself. I did this by
mv ~/.kde4 ~/oldkde4
then relogging. This, in itself, seemed to make matters worse, so I went
mv ~/.kde4 ~/newkde4
mv ~/oldkde4 ~/.kde4
and relogged. To my surprise, everything worked thereafter for a few hours.
I think this was coincidence, because, after a few hours, the same thing happened and the "fix" didn't work anymore.I checked .xsession-error and it says
/etc/X11/xim: Checking whether an input method should be started.
sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
INPUT_METHOD is not set or empty (no user selected input method).
[code]....
I find it incredible that installing and running reputable software such as Clamav on my system should be a major problem. I have openSUSE 11.3 with kde 4.5.2 desktop and when I try and install clamav using Yast the files are downloaded into old kde3 directory and nothing works.
View 9 Replies View RelatedOn SuSE 11.3 x 64 when I log into KDE4 the screenlets appear and work normally. If I log into Gnome or lxde the screenlet manager appear but screenlets themselves don't.
View 4 Replies View RelatedI'm using the system system monitor applet, and ksysguard, with lm sensors to monitor CPU / GPU temps and fan speeds. Works great, and I love the system monitor applets fuel gauge style display. However, I don't see any way to configure maximum temp thresholds in either of these. It appears that ksensors previously allowed the configuration of temp alerts, but this appears to be a pretty old school app at this point. I am surprised that ksysguard and system-monitor don't have alerting functions. Am I just missing this, or is there another applet that is currently providing this functionality?
View 2 Replies View RelatedI Just Installed Opensuse 11.3 on Dell INSPIRON N5010 laptop in dual boot with windows 7 installed.The laptop boot up(OpenSuse GUI is seen during boot) to run level 5 with only two errors;1. Failed service in runlevel 5 nscd2. Skipped services in runlevel 5 cif nfs.there after it give me a login in in like command line(no GUI mode loaded but on the background I see the OpenSuse Icons like the desktop was loaded), I can login in a that command line and get the laptop receive IP and do other service like ssh/telnet and other command line functionality but I don't have the KDE4 Desktop to allow me launch applications in GUI mode
View 9 Replies View RelatedIts here [URL]...
Obviously, due to dependencies,
version 11.4-82.2 of
kdebase4-runtime-branding-openSUSE
kdebase4-workspace-branding-openSUSE
kdelibs4-branding-openSUSE
kdm-branding-openSUSE
will not install.
64bit version works great for me. Only hic-cup noticed is mouse cursor theme seems inconsistent after reboot unless Oxygen White or Black selected.
I remember installing basket notes in ubuntu and it's in kde4 I tried installing it in 11.4 64bit and it's in kde3. Is there a way to install it dressed up in kde4?
View 1 Replies View RelatedI cannot find workspace in kde4 under 11.4. I try to add from taskbar option, but find nothing.
View 3 Replies View RelatedIs it possible to set how quickly the notifications in KDE4's notifications widget will disappear? They stick around a couple of seconds too long for my taste.
View 9 Replies View Related