OpenSUSE Install :: Borked My WindowsXP Boot When Installing 11.3
Sep 28, 2010
I have an existing WinXP install on the main drive (/dev/sda) of a Dell laptop. I installed Suse on the second (caddy tray) drive and didn't touch the existing windows partition during install.
After install completed, I found there was no boot loader entry for WinXP during startup. Only SUSE-related stuff. I opened YaST boot loader and tried creating an entry of type "other" and device of "/dev/sda1" and set this as the default entry.
The /boot/grub/menu.lst file now has an entry:
When I restart the machine I get an error message:
View 9 Replies
ADVERTISEMENT
Jul 18, 2011
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
View 9 Replies
View Related
Feb 5, 2010
I decided to use my 16gb usb drive as a boot stick for a new opensuse install by doing what the doc said to do i.e. "dd if=USBdrive of=ISO bs=4M" which worked great and all, but now I want the drive to do something else besides act like a cd with openSUSE on it. I can't figure out how to delete or write anything to it, because it's now read-only. Remounting hasn't worked but it's possible i'm not understanind how the mount command works, but I have tried "mount -rw /USB /MOUNTPLACE" and also with a couple of different filesystem types like usbfs & vfat.
View 5 Replies
View Related
Dec 14, 2010
I'm running 10.10 and I have an ATI HD5470 and I was trying to add VAAPI support. I was told to compile and install a newer version of ffmpeg from SVN, which I did. I had to uninstall all the current/medibuntu libav* codecs to do so. I want to uninstall it but whenever I try to do anything in Synaptic it tries to reinstall the standard codecs before it can remove ffmpeg so it says
Code:
I can't uninstall this broken version and I can't get all the applications that had to be uninstalled back!
View 2 Replies
View Related
Jan 2, 2011
I have been running dual boot Windows XP and Slackware for years but I recently changed things up a bit a "broke" something.
Windows XP is on it's own 250GB HDD. I installed Windows 7 on a seperate 74GB HDD but it appears that it installed the bootloader over top of the Windows XP bootloader on the 250GB HDD. Both OS's booted fine and that point. Then I partitioned the 250GB HDD into 150GB and 100GB leaving me 100GB to install Ubuntu. I told Ubuntu to stick it's bootloader on the 250GB HDD thinking everything would work like magic although there appears to have been a little bit too much magic. Normally Slackware will allow you to manually edit your Lilo config file during installation and add all your OS's but this didn't happen with the Ubuntu install.
After the install there were 5 options in the bootloader menu (at this point I am not even sure what bootloader it was using). Ubuntu, Ubuntu ("safe mode?"), memtest, more memtest, and Windows 7 (bootloader? it wasn't just called windows 7 but something like Windows 7 bootloader, I have only booted once and I am writing this from Ubuntu right now). I tried selecting Windows 7 at that point hoping that it would bring me to the Windows bootloader which would allow me to select from Windows 7 and Windows XP but the screen just went blank for a second or two and then sent me back to the same screen I was just at.
So a quick Google of Ubuntu bootloader led me to believe I was using Grub and I needed to look for the /boot/grub/menu.lst file and edit that but the file wasn't there. Then I tried running grub but I was informed it wasn't even installed. I thought maybe I would have better luck with Lilo but that wasn't installed either. So I installed Lilo and ran liloconfig but I was told that fstab gave a UUID that led Lilo to belive I wasn't using an ordinary block device and I should go fix that and come back afterwards. In fact the only thing in fstab was the ext4 partition with Ubuntu and the swap partition even though I have 4 sata drives installed with 6 separate partitions.
At this point I am pretty lost. Most of my Linux work is done in Parallels now on a Macbook so I haven't had to mess with the bootloader in years and when I did it was all on Slackware which to me is set up quite a bit differently than Ubuntu. I would be pretty sick if I screwed up and took out 3 OS's with it.
How Grub will handle booting both Windows OS's when Windows appears to be doing it with one bootloader.
View 5 Replies
View Related
Aug 7, 2010
borked the bootloader by my own doing. When I got this machine, I had a single HDD. I partitioned it with a primary partition for Windows, followed by an extended partition with swap, /home/ and /, as well as a FAT32 partition for "general" data. (this was before NTFS write support was common) This worked well with the Win2K install. Eventually, I added a second HDD, which became part data storage, and part Windows XP install. I eventually put Win7 on it, and pulled the other HDD during setup so that the boot order of the drives determines whether I boot Win7/XP or get GRUB.
However, my "data" partition was not visible in Win7... It shows up as an unknown FS in the disk management. OK, I thought. I used Paragon partitioning software to move the "data" partition out of the extended partition and make it a primary. I could now access it from Win7. I didn't realize I had GRUB set to boot from the extended partition, so now when I boot from that HDD, I get "no operating system". No problem, I thought. I'll pop in the install CD (NET), use it to boot the installed 11.3, and run the boot loader setup. Nope- setup just hangs. Tried it with an 11.2 DVD... doing a "boot installed system" nets me a few moments of searching, "evaluating root partition", and then "no valid linux install found". Trying the boot loader reinstall from there nets me an "error changing to target environment" and the install fails.
I can still mount the / partition via rescue mode and all files appear to be intact, so I don't think I've lost any data... just grub/the MBR is borked. I've already moved the data partition back in to the extended partition but no luck. Still the same story... thus I'm stuck booting Windows until I fix this.
View 8 Replies
View Related
Jul 14, 2011
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
View 9 Replies
View Related
Apr 7, 2010
If i boot to fedora and boot back to windows i can no longer can access network/internet on windows! It says the network is disconnected. The cable is connected properly and this message is happening only because i booted to fedora 12 previously before booting into windows.
I did not have this problem with fedora 10, 9. recently i did an upgrade to 12 and this is one of the problems among the many other i am facing. In order to get internet back on windows i have to shutdown the pc and wait for a while and power on again to get network back on windows. the same issues exists on windowsXP64 and vista32.
I am connected to the internet like this pc->Realtek RTL8168D(P)/811D(P)->linksys router connected to pc by network cable --> DSL modem. the router connects to DSL by ppoe
My router's ip is 192.168.0.1. usually if i type this on my browser it will take me to the routers configuration. But a previous boot to fedora and i cant even access my router. its like it says "network disconnected".
why is fedora messing up my network connection? its pathetic that there is no OA in linux and it makes my life miserable.
View 14 Replies
View Related
Apr 18, 2010
I've been having trouble booting into Ubuntu 9.10 after installing OpenSUSE 11.2. When I installed it, the opensuse setup detected the partition ubuntu was installed on and added it to the grub menu. I also have windows vista and windows 7 installed and both boot up just fine from the opensuse grub boot menu. The ubuntu installation that i have was an upgrade from 9.04 so I am not using grub2 in that installation.
System Info:
Amd Phenom II X4 810 2.6ghz
4 gb ram
Ubuntu 9.10 64 bit
OpenSUSE 11.2 64 bit
View 3 Replies
View Related
Jul 15, 2010
I'm trying to make my iMac "Triple Boot".But using rEFIt as the boot loader, and installing Grub or Lilo makes the "Boot Menu" complicated.
"SO, DO YOU THINK IT'S A GOOD IDEA NOT TO INSTALL "GRUB, LILO, OR OTHER BOOT LOADERS", and just let rEFIt to do the job?
View 4 Replies
View Related
Jan 3, 2010
I bought a Linux magazine as a Christmas present attached to it was a 8GB distro-loaded disc sporting Ubuntu 9.10 (which is already on my system,) Mandriver, and open-SUSE 11.2 which I decided to install.
Problem is, I can't get into Ubuntu anymore, where all my mail music ect is.
Ubuntu is listed with vista in window 2 of open-suse grub. When I try to boot Ubuntu I get an earlier kernel splash which is somewhat magnified and busybox v1.1.3. Vista boots OK.
Would un installing openSUSE put things back as they were? I can learn about open-SUSE using the DVD
View 9 Replies
View Related
Jan 25, 2010
Well, in first place let me tell you that my HDD boot sector or i dont know what is damaged, so to boot i made a boot usb with the grubdos utility, so anytime i want to boot in win7 i have to plug my usb and select win7 from it.Today i finished downloading the opensuse iso, then i mounted the image with poweriso and initialized the install, and it asked me to restart my computer, after that when i boot from my usb pendrive it goes directly to the opensuse install, but it just showme the blackscreen and nothing happens.
View 8 Replies
View Related
May 12, 2010
So I'm using opensuse 11.2 and recently installed ubuntu 10.04 to a different partition and all went well. when I boot opensuse I get a lot of interesting messages yet everything seems to load fine and I've not noticed anything behaving differently. I checked the boot log via
Code:
Looking through it i did see a line in there that looked familiar from the boot up and it is
View 6 Replies
View Related
Aug 23, 2010
in the direction of a HOWTO (cant find one via Search or Google)hat tells me how to install dm_mirror to enable a boot of an 11.3 system that uses LVM for root and swap? I really would likecommands rather than using the GUI as it will help me understand what is going on in the background
View 1 Replies
View Related
Mar 29, 2011
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
View 1 Replies
View Related
Sep 13, 2010
Just did a clean install of 11.3. After first try, system couldn't boot for hard drive. When installing a second time, I noticed that booting from a boot partition and the MBR are disabled by default. I enabled both and proceeded with the install. System now boots fine. Since the automatic partitioning created a boot partition, I'm assuming that that is where the system is booting from and I didn't need to enable booting from MBR, but am not 100% sure. So make sure to at least enable booting from a boot partition
View 3 Replies
View Related
Nov 23, 2010
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies
View Related
Dec 15, 2010
I have a laptop with the CD-ROM apparently broken, so I installed OpenSuSE 11.4 milestone4 from USB stick .unfortunately in the end of the installation I had a GRUB configuration error (twice) . then, in the third time I removed GRUB from the installation procedureSince my other GNU / Linux is Ubuntu, I did update-grub on ubuntu, it detects the presence of OpenSuSE but it does not add it to its grub.cfgwhen I wanted to add it manually to ubuntu's GRUB, I realized that, in OpenSuSE, the /boot path was empty.My Question is: Do you know how to put the files needed to boot OpenSuSE (initrd, vmlinuz , ...) in the directory /boot without installing OpenSuSE's GRUB ?? (ie keep the ubuntu's GRUB)
View 8 Replies
View Related
Mar 21, 2011
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
View 1 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
Jul 21, 2010
I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies
View Related
Sep 21, 2010
Suddenly, after installing, boot was failed.
[Code]...
i was surprise, because in initrd-2.6.34.7-0.2-default all was ok.
View 2 Replies
View Related
Feb 15, 2010
I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
View 9 Replies
View Related
Oct 30, 2010
I used the ATI executable to install the ATI videocard driver and now my Fedora install wont boot at all... it stops mid-bootup and the screen flickers and it just hangs. Is there any way for me to rescue my install with a Live CD or Live Media?
View 3 Replies
View Related
Jan 27, 2010
Using Suse 11.2, Linux 2.6.31.8-0.1-desktop.i386
Did a kernel upgrade today and VMware 6.5 wouldn't build modules, failing with
Code:
version `GLIBCXX_3.4.11' not found
To get it working again:
Code:
cd /usr/lib/vmware/lib/libstdc++.so.6
mv libstdc++.so.6 libstdc++.so.6.orig
ln -s /usr/lib/libstdc++.so.6.0.12 libstdc++.so.6
[Code]....
View 1 Replies
View Related
Apr 14, 2010
I borked my perfectly good 11.2 install, while replacing a failing hard drive. I reinstalled, and now my sound doesn't work - or not quite. I get the left front channel, nothing else. Battle Duel crashes due to sound errors - or I probably wouldn't care.
[Code]....
View 6 Replies
View Related
Sep 10, 2010
I recently installed an ATI graphics card driver (fglrx) and ran the aticonfig --initial program/option, which makes the necessary changes to xorg.conf for the user.
My original problem was that all of my font sizes were changed (far too small to even read). I found a temporary way around this by simply increasing the sizes in the gnome appearance properties, but the problem is there is no option to change the size of text that appears in editable fields. For example, simple text-line entry widgets in various applications appear very small (as well as the default text size in icedove mail). Trying to use openoffice.org Writer or Calc also gives the same results. It seems directly related to the sizes of "editable fields" (things like my text editor - gedit- appear to be fine, as well as my terminal). I'm guessing this could have something to do with my xorg.conf, but I've looked through the file and don't know what to change, or where else I could look. If it helps at all, I have most of my font sizes now (in gnome) set to 14, but they appear as 12.
I'm not sure exactly why this is happening, but I need some help in getting some of this text readable again. Please see the attached screenshot of a blank Calc spreadsheet, and it might shed some light on this. You might also notice that in the screenshot, the default font size is 10, but if I change this to 12, and then load it on say, a Windows computer, the text will appear to be much larger than a 12. I'll also include my xorg.conf, in case that has anything to do with it.
Code:
View 14 Replies
View Related
Dec 19, 2009
I am using x86_64 fedora 12 along with WinXP. I install ed windows Xp first and then F12. I can boot into F12 without any problems. But when i try to boot into windows, a blank screen appears with a blinking cursor on the top left position.
View 7 Replies
View Related
Mar 23, 2011
After installing a new motherboard msi k9m6pgm2-v2 openSUSE 11.4 64 won't boot.
This is what happens -
The computer boots normally
The grub menu appears as usual
I select opensuse & press Enter
The boot splash appears......but the progress bar stays still for a few secs ...... then the following appears
Code...
Want me to fall back to dev [something something] Y/n ?
When I press enter
Then I press ctrl+alt+del to reboot.
Is there a way to fix this or do I have install openSUSE all over again ?
View 2 Replies
View Related
Jul 24, 2011
I installed openSUSE alongside Windows yesterday using the default settings. I had the installer automatically shrink my windows partition and create one for openSUSE. When I boot my computer now, the openSUSE bootloader shows up with options to boot into openSUSE, failsafe openSUSE, windows1, windows2, or windows3. Windows1 and windows2 appear to be the same thing - they both boot into windows, they read the same info for the hard drive, they have access to all the same files. Windows3 cannot start and says that the BOOTMNGR is missing. What are these three different windows options, why are two the same, and why doesn't one work?
View 3 Replies
View Related
