I have a large HD (1 TBytes) on my Server and I need to install 11 SP1. I want to use this server for software development (Web apps with Oracle DB and Oracle Forms). Can You suggest how to partition my HD for best use and performance ?
View 2 RepliesI have an 11.2 laptop and thought it was time to upgrade to 11.4. I downloaded the 11.4 X86-64 live cd and thought that I would check how it ran on my 11.3 desktop. This is a core i5 760 with an Nvidia GT240 graphics card and 4GB of DDR3 ram. The 11.4 live system shows the nouveau driver. The graphics performance is terrible. In particular windows are very very slow to resize and often don't resize properly. There are also some artifacts in some graphics. I eventually downloaded Flash which did seem to work moderately well, especially in full screen mode. The screen resolution is 1920x1080. I have never seen a windowing system work so slowly
While I always use the Nvidia proprietary driver, I don't know how I can test it via a live CD. The Nvidia driver in the repository is the 270 version and I think that I have seen reports of severe problems with the 270 version so that needs to be tested too. I always install the nvidia driver the really easy way via yast
Has anyone any idea why the KDE Live graphics are so slow? I will not go anywhere near 11.4 unless the graphics system is very much faster. Is there any way to test the nvidia proprietary graphics driver without installing 11.4?
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3
sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code:
root@PartedMagic:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
[code]...
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
View 9 Replies View RelatedI'm trying to do a partition alignment on my main SSD to improve SSD performance and then install Ubuntu on the SSD. I can do the alignment with no problem but when I install ubuntu the alignment is erased. Is there a way to install ubuntu without getting rid of the alignment?
View 2 Replies View RelatedI have little experience with Linux, took a course, read bulletproof linux. That was several years ago. My friend convinced me to set up opensuse kde with him, so I did.Set it up a few days ago on my semi-new Hitachi 1TB drive. XP was installed first, cloned from the previous (failing) drive, and took me forever to get it working.It was set up as:
Hitachi HD:
1st part: XP (250gb)
2nd Part: opensuse system
3rd Part: opensuse swap
4th Part: opensuse data
(2/3 may be swapped)
I still had 600GB unpartitioned and went to add a new 250GB partition via windows xp disk manger.Next thing I know, disk manager freezes and errors. I reboot for other reasons, and am greeted by grub (never used it before) stating ..well stating nothing.I tried the opensuse install DVD repair option and got corrupted video at first. Then I tried safe settings for booting the installer.I'm now in the YaST2 repair manager.I tried to recover partitions, but it's locked to scan only Partition 1, which is my XP partition. It says no valid linux root partitions exist.
I also tried loading the linux root partition with grub (didn't know the namescheme for the HD's, but I think it's devsda for HD0), no dice. I can't seem to find any hard drives through grub, but I'm unfamiliar with it.My goal is to get my xp back up and running. My guess is that XP tried to edit the partition table and screwed up something.The partition listing through YaST2 partmanager shows all my partitions.A good walkthrough would be great too, but at the moment I'm just going Really? It was that easy to annihilate all my bootable systems? I could also nuke the linux partition and use XP's recovery console and fixboot, then worry about the linux later. I haven't gotten it set up completely yet.
I just wanted to know if having my laptop set to ondemand, will this affect performance in any way? I realize it increases the clock speed to performance when the CPU is under load, but does the time it take to go from ondemand to performance affect speed? Will there be any noticeable difference between the two setups? I have a dual core intel at 2.2GHz when in performance. When ondemand is set with no load it downclocks to 800Mhz.
View 7 Replies View RelatedTrying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedI am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View Relatedso i have a main drive (320gb) which currently has kubuntu 9.04 installed.i also have a side drive (60gb) on which i made a backup of all my windows files (i wanted to migrate to new windows OS but messed up, long stupid story...) and also had opensuse 11.0 installed.now when i open either 2 linux versions, the ntfs partition isnt recognised anymore.there are files on it that i need, including the iso of the windows version i want to install next to opensuse (just like my old windows version)
View 5 Replies View RelatedI'd like to reinstall openSUSE 11.3 on a pc and would like to preserve the /home partition. The current partiton structure is
sda1 /boot
sda2 /swap
sda3 /extended partition
sda4 /
sda5 /home
When the installer gets to the point to set up the partitions it offers something like
sda1 /
sda2 /swap
sda3 /home
I'm not sure which option to take now. I assume I choose the option to edit the partitions but I'm not clear how to preserve the /home as it's now got a different partition number or does that no matter as long as I choose not to format it? Also, to replicate the original partition structure I'd need to delete the partitions and add them in the correct order but would that destroy the /home?I'm a bit confused with how it will work.
I did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?
View 3 Replies View RelatedI got a hold of openSUSE11.2 recently, burned it, and booted the disc up.Now i got a problem.I ain't too experienced in partitioning, so i choose everything as selected in the installation(i downloaded the full DVD, not a live CD)and i got to the partitioning part.I have this:
500GB WD Caviar Blue SATA2
80GB ATA
I installed Ubuntu on the 500gb with wubi and partitioned 30GB for it.Well that one is easier, i have absolutely no experience in installing from a CD/DVD.I saw instlux, but it wouldn't run from Win7 Any guide on how to manually partition 30GB for openSUSE too?
I've just recently decided to try Linux, but I want to keep Windows 7 on my computer as well. This is also the first time messing with things like partitions. Could anyone lead me to a good site where I can figure out how to partition my hd, dualboot openSUSE, and fix any problems that may occur?
View 9 Replies View RelatedI am almost newbie at Linux OS, but I want to install openSUSE. Unfortunately I have some programs which probably will not work on Linux, so I want to have a Windows 7, just in case. I will partition my 250 GB HDD as follows:
1. openSUSE partition/s (... GB)
2. Windows 7 system partition (100 MB)
3. Windows 7 partition (30 GB)
4. My files' partition (the rest unallocated space) - I wish both OS's to read this partition, that's why it will be NTFS.
I would like to know how many and how big the openSUSE partition/s should be. Could it be installed on one partition, or it requires separate swap, root, etc. ones?Does those NTFS partitions slow down openSUSE?
I'm using 1TB BIOS Raid stripe 0 (Intel 82801ER ICH5R) and I want to use this configure to install Opensuse 11.2 is this correct?
1GB for /boot
5GB for swap
100GB for /
Rest of disk for /home
And other question is when I install on this configure sometimes setup hangs after finishing copying file and restart to enter configuration section.
When I loaded opensuse 11.3 for the first time, I used the automatic partitioner and have been loading app's onto my ~8GB boot partition, and now that it's full, I have ~15 GB free on my home partition and need to install a few more app's to get my laptop fully functional. Is there a way (other than copying the boot partition to the home partition and then repartitioning, copying again to the repartitioned drive, and then recopying again to the freed up space) to get the new app's I install to redirect to my home partition?
View 9 Replies View RelatedI have a 53GB HDD were I'd like to install openSUSE11.2.How should I partition it? What sizes to allocate for /, home, swap (should I make other partition separately?) and also what file system should I use?
View 9 Replies View RelatedI tried to install openSUSE 11.3 from the Gnome live CD. I have two disks in my system, one with a Windows Vista x64 install, and another with a Vista x86 install which I no longer need and quite a bit of free space. I want to install Linux on it. I switch OS's by switching the boot disk in BIOS, so I don't really need a boot manager, but openSUSE installs GRUB by default, so I used it.
The Vista x86 partition is a primary partition at the start of the disk, and after it there's an extended partition with quite a few logical partitions. At the end of this extended partition I added partitions for swap, / and /home (ext4 all), and a new primary partition at the end for /boot. (I actually created these for a failed Linux Mint install, but I used them and reformatted during the openSUSE install.)
I made the Vista x86 inactive and the /boot partition active, and this works. At least, I get as far as seeing a menu which I guess is GRUB. Before that I get "Error 22: No Such Partition". If I choose openSUSE from the GRUB menu I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
I booted from the live CD again and checked the /boot, / and /home partitions, and they contain data, so they must be formatted fine.
First of all, apologies if this is not the correct place to post this. I recently installed openSUSE 11.2 (Gnome, 32bit) on my newish PC. It is an Acer Aspire X3200 (AMD Phenom X4 Quad-Core, 1.8 GHz, 4096 MB, NVIDIA GeForce 8200 Integrated, can provide detailed specifications if needed). I've to say I am very disappointed with the results so far! Sorry to say this but I'm having a whole load of problems that I never had when I had Vista or with current Win 7. Here are the issues:
1. Slow network performance. I've disabled ipv6 but it is still the same. Not only when I use Firefox, it is also slow when I use console based programs. 2. Instability - Gnome system monitor crashed 6 (or more) out of 10 times I use it. System Monitor users more CPU resources than anything else! Also when I started the PC this morning, I only had the desktop wallpaper. No icons, no taskbar, no mouse movements or menus, nothing. I had to force shut down it after a while. I'm sure we all are familiar with this on XP but I've never seen something like that on Linux!
3. Annoying noise coming every time I move mouse (mainly when scrolling) and even if I'm not doing anything. I suspect it is coming from my HDD indicator as it always blink even when nothing is running. This can't be a hardware issue as I've never had this on Vista or Win 7 (it is virtually silent on Vista and XP but not on SuSE) This noise is driving me totally mad.
4. Slow performance in general. No matter what I do, even typing this on this text window, it seems everything is running so slow. I never had this problem when I was running 10.x on my 6 year old PC. CPU is always running around 20%-30%, when I don't run any other applications but just Firefox (I have Foxclocks, Delicious and FEBE as add-ons and I don't have any problem using them on Vista or Win 7). I am using Compiz, not sure if this has got anything to do with that.
I had opensuse 11.0 on a system at home. Decided to install 11.2 since I had read that 11.2 can do upgrades from then forward.Well I fiddled with the partitioning settings, made sure that it was configured exactly like it was before - /dev/sda1 is /; /dev/sda2 is swap, /dev/sda3 is /max.I knew I would have to do a clean install, but thought it would not touch my other partition /max. I explicitly told it to NOT format /dev/sda3.Well when it booted, it goes into maintenance mode - says my partition is hosed. fsck tells me that maybe my /dev/sda3 is a zero length partition.Hallelujah that I turned off my external drive.So,for sure I will NOT be installing 11.2 on my other two systems at work.Now that my entire machine at home is a vegetable, think I might go take a look at Debian. This is not fun.Thought Linux would be a bit better than Windows in this respect.
View 9 Replies View Relatedmy desktop has two hdd(sda+sdb recognized as (hd1)and (hd0)respectively..)sda has vista on it. sda is comprised of several simple volumes which vista calls dynamic ntfs..sdb has four primary partitions: sdb1; sdb5,sdb6, sdb7. sdb5,6,7 are extended partitions,together put as sdb2.
sdb5 for swap, sdb6 for (/)(does this mean root partition? but /root and /home are on the same level..), sdb7 for /home; this is suse 11.0.I delete the last simple volume of sda, and divided it into three partitions: sda8,9,10. sda8 for swap, 9 formatted as ext3 for /home, 10 formatted as ext4 for /.And I want to keep the current grub, so I chose the boot loader location to "Boot from Root Partition" in Boot Loader Settings. At the last minute of installtion, a dialog tells me:
Code:
grub> setup --stage2=/boot/grub/stage2 --force-lba (hd1,9) (hd1,9)
Error 22: No such partition
grub>quit
(hd1,9) is surely sda10 which is mounted to '/'. why would grub not recognize this partition?
This error message always shows up whenever I boot to "rescue installed system" from dvd and try to reinstall grub to root partition, ie. (hd1,9). I tried to put one entry in the menu.lst of suse 11.0 :
Code:
title openSUSE 11.2
rootnoverify (hd1,9)
chainloader +1
But instead of boot into 11.2, it gives me a message "No such a partition"Until now the only successful boot into suse is through the dvd rescue mode-> boot into installed systems. later tries all failed.. with a message "modprobe: FATAL: Could not open.ko", the screen freezed, number led indicator and caps lock led both flashing on and off. I had to press the RESET on the box..
the good thing is suse 11.0 is still bootable, the current grub not crumbled..but the strange is grub cannot be installed. maybe it's due to ext4 format? In 11.0 if I try to mount /dev/sda10 to /mnt, it would say unknown file system 'ext4'.
I want to intall openSuse 11.2 and I don't know how to do the partition correctly. My PC run with windows vista.
This is how I made the partition:
dev/sda1: windows
dev/sda2: linux /
dev/sda3: linux swap
After the installation openSuse don't boot!
I installed openSUSE 11.2 on an external HDD to test. I think it's brilliant, and want to move it to an internal HDD. What is the best way to do this? I don't want to lose all the programs / tweaks I've made to SUSE so far.
Coming from the Windows' world, it's as easy as taking an image of a partition and restoring it over a new HDD partition.
I'd like to perform a system backup (yast/system/system bkp - SUSE 11.1) Despite I indicate an external drive with enough free space, system bkp first uses /tmp. My /tmp is mounted with / on a small size partition (sda6) with only 7 GB free. I'd like to (re)mount it on sda7, then restart the system backup.
How to do it exactly? (read somewhere I can only re-mount /tmp on empty partition, which is not my case)
Also I'd like a permanent change in /etc/fstab.
Code:
I want to upgrade to 11.2 from 10.3. I was looking at disk usage and noticed the last time I set up my system, I allocated too much space to the / partition. It's only 50% used, while /home is 83% used. Rather than resizing and messing up /home, I thought about just adding a new partition created from the / partition. Call it say /data or something and put music, pics, pdf files and such there. But, would it be automatically mounted and what about permissions?
View 9 Replies View RelatedI had dual boot win 7 and win xp, when i tried to install suse over win xp partition (i choose to format that partition during installation suse). I dont know how but suse keept win xp, and make 4 new partitions. After that i had to format whole hd, couse with partition magic i could not find that 4 partition. Now i install win 7 and win xp again, but i want to install suse instade of xp. Is there option to install suse. So i would have l 3 Os, i have laptop. Are 3os slowing comp.?
View 9 Replies View RelatedI want to install linux next to my Windows 7 Ultimate x64 and changed my windows partition from 700GB to 100GB. Now I want to use the other 600GB for linux and formatted it in Paragon Partition manager.
But when I try to install OS 11.4 I get the message that it can't resize the partition because of the type (which is NTFS) and it wants to delete the whole disc including the windows partition. How do I fix this? Do I need to delete the 600GB partition again in Paragon so its unallocated and then use Suse on it?
Or can I better first install Linux and then Windows? (for next time so it would be nice if the above worked out)
I have a 500GB hard disk and divided to 3 partitions, 1 for windows, 1 for openSUSE and 1 for Ubuntu. i have installed and reinstalled linux on my laptop for many many times but it is like this, Grub 2 is installed to MBR and it workded fine but i want to add openSUSE and chose not to boot from MBR when installing it.i had to edit the menu.lst and got it to boot to Ubuntu partition. i also share file on partitions directly by booting to openSUSE and take data from Ubuntu and Windows partitions. so sometimes the pc boot i cannot scrool down the grub menu entry and it boot directly to openSUSE. BUT it returns to the start point ( i can see Dell booting, my laptop is Dell Inspiron N5010). and so i decided to reinstall Ubuntu(kubuntu) and set grub to install to its own partition not MBR.
Now i cannot boot to either openSUSE or Ubuntu. Only Windows is available by chance. new problems arise now that i cannot even boot the bootable CD. Did i loose the MBR or sth?