OpenSUSE Install :: How To Install App's To Home Partition
Feb 5, 2011
When I loaded opensuse 11.3 for the first time, I used the automatic partitioner and have been loading app's onto my ~8GB boot partition, and now that it's full, I have ~15 GB free on my home partition and need to install a few more app's to get my laptop fully functional. Is there a way (other than copying the boot partition to the home partition and then repartitioning, copying again to the repartitioned drive, and then recopying again to the freed up space) to get the new app's I install to redirect to my home partition?
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
I was looking to do a fresh install of 11.2 and use my home partition from 11.1. During the Gnome Live version I wanted to see how suse would configure my computer. It recognized everything fine, except it didn't show my current home partition which is ext 3. Because Opensuse 11.2 has switched to ext 4 as default for root and home? I was hoping to use my old home with 11.2. Is there any way to make the switch without losing my settings? During the live install the partitioner didn't use my current home partition, it was going to make a new one.
So I opened up the partitioner in yast to see why it didn't use my current home and it shows no mount point for my home ext 3. Would changing the mount point on my ext 3 partition to home make the 11.2 installer recognize this as my home to use? Or will I have to copy my current home. Paste it elsewhere. Delete old home. Use unallocated space as ext 4. Paste old home on new ext4 to have the 11.2 installer recognize this as my home. So, current home is ext 3. 11.2 installer wants to make a new home on ext4. How do I use my current home settings? I haven't installed yet just tried a live run.
I was recently forced to do a reinstall of OpenSUSE. As part of that I backed up the folders I needed to keep. The installation however didn't format the 'Home' partition though. At first I thought it was nice, but I've run into trouble with a program I most definately need to get working. So my plan is to re-install yet again.
how to make the install format the root partition I think it is, and the 'home' partition, so I can start fresh.
To further complicate things My laptop (which this is happening on) is dual booting between OpenSUSE and Windows 7. It is VERY important that the windows partitions remain.
This is strange. I moved OS 11.1 from an old 150 GB PATA drive over to a 500 GB SATA using Parted Magic. The old and new partitions were
Code: OLD: /dev/sda1 - 19.99 GB, mounted as / (root partition) /dev/sda2 - 97.82 GB, mounted as /home /dev/sdb1 - 29.52 GB, Windows XP NEW: /dev/sda1 - 29.30 GB, mounted as / /dev/sda2 -292.97 GB, mounted as /home /dev/sda3 - 45.82 GB, Windows XP
I used the "Clonezilla" tool on the Parted Magic live CD to move and resize the partitions. To my delight, everything appeared to transfer just fine. I can boot into OpenSUSE 11.1 (though not into Windows, but that's not really important; I'll figure that out later), but my /home partition won't mount. I'm set to autologin, and I get the expected error: "can't access /home/stephen" (or something like that). Here's the weird thing. I can ALT-F3, get a terminal and manually "mount /dev/sda2 /home", go back to ATL-F7 and log right in, so I know the disk is fine. (I've already 'fsck'd everything, by the way, and they're clean.)
I've used Yast's partitioner about a dozen times, trying "device by ID" and other settings. I always get the same thing when I reboot. On this last reboot, when it refused to log into /home, I ALT-F3'd, logged in as root, did a "cat" on "/etc/fstab" and entered the device-by-id line exactly as I saw it there and it mounted the /home directory just fine! ALT-F7, logged into KDE. I'm typing this in KDE now. Works fine. I so rarely need to reboot this machine that I can manually mount the /home partition, if need be, but (obviously) I'd like it to be mounted automatically during the boot.
I don't see anything obviously wrong here. The fact that I can take that second line and do a manual "mount" shows me that the device ID is at least correct. Just to be clear, here's what I entered in virtual terminal 3 as root to get my home partition to mount: Code: mount /dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part2 /home and it worked fine. Exact same line.
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
I have two partitions where I can install (e.g. versions of openSUSE). I have a Swap and a /home partition to be shared by both. Thus e.g., while still running 10.3, I could install and test 11.2. Once I switched over to 11.2, I still can use 10.3 when need arises (not done for monthes now). I have the 10.3 partition mounted, thus I can stilll see what was in /etc/.... on the 10.3 system from the 11.2 system if need arises.
I gave the file systemss on those two partitiions different labels to better keep them apart. It is in the first place up to you to design how you want to partition your disk(s) to facilitate such a feature. Has someone done a thing like this (especially sharing /home partition) with openSUSE and Ubuntu? Is there a How-To anywhere? Until now I have the /home folder of Ubuntu not on a separate partition but under the system/root partition "/" of Ubuntu.
Im using suse 11.1 with /home on a separate partition. To move my /home to a larger partition it looked easy to use Yast partitioner. I copied all /home/ files first to the new partition and backed-up fstab.
with Yast I unmounted /dev/sdb6 = /home and mounted it to /local then unmounted /dev/sda4 = mynewhomepartition and mounted it to /home
checking the new fstab it looked fine but after a restart it did not work and I got an error. resetting the original fstab resetted the system as it used to be. My question is: why does it not work, are there (hidden) files with the old or other settings?.
I'm upgrading to 11.3 (from 11.2) and will be keeping my current home partition. Will this keep my browser favorites? Also, I read somewhere that in order for things to work properly after upgrading (without reformatting my /home partition) that I would have to keep the same username AND user UID...? Is that true? How do I make sure I have the same UID if so...?
I purposely set up a seperate home partition so that when I changed distro's or upgraded I would still have my files, and some settings intact. (I switched distros a lot when I first started using Linux.) I set up a "bin" folder (in home folder) that had a couple of programs I had downloaded to keep from having to set up and configure everything all over again every time I felt like changing distro's as well.
I mistakenly removed my /home of openSUSE while trying to install another distro. My root pertition is OK. openSUSE is shown in grub. but i cannot boot into it as there is no /home is there any way to fix this without removing my openSUSE?
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
When the installer gets to the point to set up the partitions it offers something like
sda1 / sda2 /swap sda3 /home
I'm not sure which option to take now. I assume I choose the option to edit the partitions but I'm not clear how to preserve the /home as it's now got a different partition number or does that no matter as long as I choose not to format it? Also, to replicate the original partition structure I'd need to delete the partitions and add them in the correct order but would that destroy the /home?I'm a bit confused with how it will work.
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
I just installed suse 11.3 on formatted partitions (5GB swap, 30GB / and 500GB /home). Just after the installation, My computer showed 25.2GB of /home to be used. When I do:
Code: dyn-0a2a1f40:/ # df -h .....
That seem to be roughly correct because since yesterday I've been running a program that constantly writes logs and other data files and plots, which might have accumulated a few GB's. It is also collaborated by the output of
Code: dyn-0a2a1f40:/ # du -sk /home 10548452 /home
I'm not hard-up on space right now but storage has been dear until the recent past. Also out of curiosity, the size of the /home partition is shown as 493 instead of the 500GB allocated while the swap also lists only 4GB instead of 5GB. Below is the output for fdisk -l in case anyone needs it:
When running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
i have 2 harddrives. a 6gb and an 11gb. IDE ATA. i want to install opensuse 11.2 on them, using EXT4, in a different way this time. i want the "/" partition to cover all of the 6gb, with the drive set to master. For the slave, I want the "/home" partition on the 11gb, covering only 10gb on the beginning of the drive, and i want the swap space partition on the end of the drive using 1gb. Is this a smart way to install it? Will i have to continuously mount the drive with home and swap on it? What is the best configuration for using these two drives?
I have a netbook (Acer Aspire One ZG5) with ubuntu only partitioned this way:
/ swap /home
Since this ubuntu is 10.04 upgraded many times (since 8.04) I want to make a fresh install, and also want to take the oportunity to install and give a try to meego, so I want to...
/ ubuntu / meego swap (need to expand) /home (ubuntu)
My question is can I keep my current /home partition (which is encripted) and use it with my new 10.10? How?
I guess it's time to move up to Ubuntu 9.10 from 9.04 ...unless you would advise me to stay with 9.04. Either way, I would like to do a clean install. I managed to create a separate partition for /home almost a year ago ... now the only thing I want to keep inside /home is one big folder which I already had made a backup copy with several DVDs (larger than 4GB). Besides that large folder, I would like to start everything new. This would be my second time installing and it has been quite awhile. Here are my questions:
1. I know I have backup DVDs in hand. But sometimes DVDs are funky. I would restore my files with DVDs as last resort. So, should I just delete all files and folders (including hidden ones) under /home except a large folder that I would like to keep? If so, can I do that while on a normal gnome session or am I better off doing it while on Live CD?
2. I see a suggestion that when installing Ubuntu, I need to make sure to mount /home but NOT FORMAT IT. Is there a visual tutorial or step-by-step guide showing how to do this?
3. Are there other gotchas like I need to "create" user name the exact same spelling as old user name that is already created under /home on my harddrive?
I've read several accounts of users who upgraded Ubuntu versions and ran into problems. I read that putting /home on a separate partition can make it easier to do upgrades. But it seems to me application versions and even the default applications themselves change so much between Ubuntu releases that I question whether it's a good idea to have all the "OLD" config files and settings that get stored in /home sitting around when running a new Ubuntu release.Does anyone think it's a better idea to just put the whole Ubuntu install (i.e., / and /home) on the same partition? And then when upgrading, backup, and then just fresh install everything (to get the cleanest possible installation)?
I'm planning FC11 x86_64 with a live cd , but I would like to preserve my /home partition that is in ext3 . or is there a way to do an install and keep my /home and convert it after in ext4
Looks like I missed defining a /home dir during installation. It's been a while I have a spare partition now that I'd really love to use. Can you specify this still, or is it only allowed during an install?
While home still exists on /sdb2 and was backed up "just in case", it didn't get mounted post 11.3 install. I probably did something wrong but what? How do I fix this? I'd rather not re-install. I'd rather learn by my mistake(s).Also, what are devtmpfs and tmpfs? Are they necessary? I don't recall having them back in 11.1, but I could be wrong.
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work. i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3 sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code: root@PartedMagic:~# fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
I am almost newbie at Linux OS, but I want to install openSUSE. Unfortunately I have some programs which probably will not work on Linux, so I want to have a Windows 7, just in case. I will partition my 250 GB HDD as follows:
1. openSUSE partition/s (... GB) 2. Windows 7 system partition (100 MB) 3. Windows 7 partition (30 GB) 4. My files' partition (the rest unallocated space) - I wish both OS's to read this partition, that's why it will be NTFS.
I would like to know how many and how big the openSUSE partition/s should be. Could it be installed on one partition, or it requires separate swap, root, etc. ones?Does those NTFS partitions slow down openSUSE?
I installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
Whats better partition based install or LVM based install?Does one perform better than the other?I have a 640 gig drive.I have win 7 installed on a 360 gig partition.The remaining space is free.
