OpenSUSE Install :: Can't Resize The Partition
Mar 17, 2011
I want to install linux next to my Windows 7 Ultimate x64 and changed my windows partition from 700GB to 100GB. Now I want to use the other 600GB for linux and formatted it in Paragon Partition manager.
But when I try to install OS 11.4 I get the message that it can't resize the partition because of the type (which is NTFS) and it wants to delete the whole disc including the windows partition. How do I fix this? Do I need to delete the 600GB partition again in Paragon so its unallocated and then use Suse on it?
Or can I better first install Linux and then Windows? (for next time so it would be nice if the above worked out)
View 1 Replies
ADVERTISEMENT
Jan 5, 2010
The openSUSE 11.2 installation disk doesn't want to let me resize my NTFS-based WinXP partition; it just says that the fs is inconsistent and that I should check this issue in windows... But even though I've scheduled diskcheck to run after a reboot, it doesn't! Is there some way of "forcing" the diskcheck to run upon startup, or how else can I resolve this issue (without re-installing my entire system)?
View 9 Replies
View Related
May 5, 2010
My boot partition is 1.5 gb Id like to resize it to 512mb..Though can it be done in yast partitioner ?
View 9 Replies
View Related
Jan 6, 2011
During install process I assigned only 6GB for my root partition and now I'm almost running out of space. I have 11.1 installed and I wanted to update to 11.3 but there are problems with i855 video card with newest distro versions so I won't install it. Since everything is installed and configured I don't want to install 11.1 again.
View 6 Replies
View Related
Apr 22, 2010
I used QParted to size one my hard drive's NTFS partition to make unallocated space available to install SUSE. QParted created the the unalloacted space fine and I got SUSE up and running.
However, the NTFS partition is messed up. The QParted GUI and the SUSE's Disk management GUI shows it as NTFS drive with 319 GB space. However, nothing seem to be able to read/write to it. QParted gives a warning "Unable to read contents of this file system! Because of this some operations maybe unavailable." Is there any way to fix this NTFS partition so I can recover data from it?
View 9 Replies
View Related
Apr 11, 2011
I've just installed Fedora 14 over an old Ubuntu (heron, I think). The old install used a single partition for both / and /home; and I wanted to try to avoid reinstalling /home if possible (but yes, I did back it up). I chose the anaconda option to shrink the old Ubuntu /, and created a new LVM for the Fedora /. This seemed to work perfectly. I mounted the old / on '/host' (an old naming habit), and then mounted individual home dirs into /home using autofs. All seemed fine. However, on my first reboot after the autofs mounts fsck failed. The current situation is as follows:
# fsck /dev/sda6
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
The filesystem size (according to the superblock) is 15360000 blocks
The physical size of the device is 15359895 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes
# dumpe2fs /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
# dumpe2fs -o superblock=32768 /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
Same thing for all the other backup superblocks I've tried.
# echo '15360000 4 * p' | dc
61440000
# fdisk -s /dev/sda6
61439583
Resize2fs tells me to run fsck, and complains of a short read if I try to force. Fsck seems to run fine if I say 'no' to the abort prompt, but doesn't change the problem. Filesystem is ext3. Started with debugfs. First used icheck and ncheck to work out which file(s) had been written to the non-existent blocks past the partition size. Fortunately, there was only one. Deleted that file (can restore it from backup later). Quit debugfs. Now resize2fs -p -f worked perfectly. fsck after resizing was clean. Reboot seems happy. As for the origin of the problem, I would guess there's a rounding bug in the code anaconda uses to shrink partitions.
View 1 Replies
View Related
Nov 13, 2010
I have understood that Vista does not always play nice with third party partitioners and that it was best to use the tools *within* Vista to change its size.
I do not know, but the same might apply to Windows 7? Anyway I understand Windows 7 also has its own resize tools.
My advice to newcomers with Vista (or Windows 7) has been to use the Windows inbuilt tools to resize and then to leave un partitioned space on the drive, because until recently the Ubuntu Live CD has included an option 'Install into un partitioned space' or similar. Which was very easy.
However, with Ubuntu 10.10 Desktop CD the same option does not exist, so for beginners, or any nervous newcomer, the only practical option in most cases is to use the 'resize' facility in the Ubuntu installer.
This is a circular situation, if the Ubuntu facility resize is recommended to be avoided.
I would very much like to avoid having to tell them to use the 'advanced' option. Most of them are pretty jittery, from having used Windows for years.
I am aware that the 10.10 Alternate CD still includes 'install into un partitioned space'. Do I now tell people they need both a Live CD for initial tests and then also an Alternate CD for install?
They would see the install invitation in the Desktop CD live session and have to disregard it.
The Ubuntu 10.10 installer is, on the face of it, getting more friendly towards nervous newcomers.
Are the warnings about third party partitioners still relevant?
View 3 Replies
View Related
Oct 10, 2010
Want to repartition/resize existing 1/2 full 60MB sda2 currently containing NTFS. The "Allocate drive space" does not seem to have a resize option (the 10.04 docs claim there was a resize option here). When I run 10.10 gparted in live mode gparted crashes for unknown reason before it even finishes scanning the disk. Am I missing something here? (Never tried to resize an ntfs part. with Ubuntu.) The laptop I am installing this on currently has XP that crashes a lot for unknown reasons.
View 9 Replies
View Related
Apr 13, 2009
I am doing a fresh install of Fedora 10 64bit on my PC. What I have done is, freshly installed Vista Home Premium 64 bit on the entire Hard Drive (680GB), then fired up the live CD and told the installer to resize sda1 (The windows partition) to about a 60:40 ratio. I intend to dual boot the system
Now the thing is, it's been running for half an hour now and there's no progress indicator on the installer so I don't know if its actually doing anything. Well there is a progress indicator but it's nonsensical, it just moves backward and forwards. The HDD indicator LED on my computer is flashing every now and again, but not constantly as I expect it to?
View 5 Replies
View Related
May 29, 2011
I have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
View 9 Replies
View Related
Mar 21, 2009
ive installed it before but that was with help and i want to dualboot it on my laptop with windows when i get to partitioning setup it tries to delete my windows partition and says "cannot resize due to inconsistent fs." for my windows c drive and recovery drive i dont want to delete it becouse i have data on it.
View 9 Replies
View Related
Dec 14, 2009
I've been using Kubuntu for several years now (and Fedora and RedHat before that) and decided to give openSuse a try. Looking for more love for the KDE version of my distro basically. Anyway, the install was pretty rough.
My first go was to try and resize my kubuntu partition (ext3) during the install. The installer froze at 1%. After a boot to kubuntu which ran fsck, it seems no damage was done. Without letting it run fsck, it could not mount though, so it was not without risk.
I tried to resize it myself after reading some forum entries here and came to the conclusion that resizing is just not worth the effort and tanked my dell recovery partition (when was I going to use that?) instead. If you do have to resize a partition, ext3 at least, I would recommend that you try another approach or at least resize it outside of the installer. Once I let it just reformat an existing partition, the installer managed to install to the hd.
I had another freeze after leaving the installer for some time as it was waiting for me to enter my host name. I rebooted and it figured out right where it should be though.
View 7 Replies
View Related
Jan 20, 2009
i cannot resize mounted lvm volumes with reiserfs by using yast like in a previous version 10.x !?
View 6 Replies
View Related
Aug 8, 2010
I installed Fedora 13, but did not expect it would set up a LVM on the entire remaining unpartitioned space.
So I'm now trying to resize the partition the LVM is on. I already resized lv_home using system-config-lvm... however now lv_swap resides at the end of the physical volume. If I assume correctly that this also means that it resides at the end of the sda6 partition, I need to move it in order to resize the partition.
It now looks like this: [URL]
How would I go about moving lv_swap right next to lv_home? And how can I actually resize the partition? gparted doesn't seem to be able to resize lvm2 partitions.
View 1 Replies
View Related
Sep 30, 2010
Ubuntu 10.04 64-bit (installed on installer)
What will be an easy and safe way to resize partition? Boot up the LiveCD? Or can I run resize2fs on Ubuntu while the latter is running?
Code:
This is a newly installed box without files on /kvm. Now I want to resize /home taking up the complete capacity of /kvm which will be removed/deleted.
View 5 Replies
View Related
Dec 21, 2010
I'm running Fedora Core 14 on my server and in copying over all the stuff I had backed up before the install, i recived the message that one of my volumes was nearly out of space. Since this is just a partition on my hard drive, I could resize it to make it larger, but I don't know how. It's a ext4 partition on my 2nd hard drive.
View 10 Replies
View Related
Jun 6, 2010
On recomendation from the team installing the DB on our new server, all the partitions etc on our VM were created as LVM's. The setup for this is like this:
Disk 1
-> /boot
-> /swap
-> LVMpartition1
[Code]....
View 9 Replies
View Related
Feb 25, 2011
I have a default centos 5.x install on an 8GB hard disk. (This means the volumegroup is mounted to / ). I've increased the size of that hard disk to 12GB. (so yes, fdisk says my disk is 12GB)
I now need to increase the LVM to use the 12GB instead of the 8GB. Every single article I've come across says:
"run lvextend on your vg you want to increase, then unmount, reboot, run live cd or whatever and then run resize2fs".
But of course lvextend +anyG returns an error saying not enough free extents
lvextend +100%FREE returns saying the extents matches extents
How can every the google result be wrong? How can I simply tell this LVM that it's now a few gb larger?
View 3 Replies
View Related
Aug 20, 2011
I need to resize (increase) LUKS partition. I have found a lot of manuals, but they are just for LVM volumes(I dont use LVM and I dont plan to use it). I have HDD splited to the 4 parts:
sda1(/)
sda2(LUKS)
unalocated
swap
I want to increase LUKS partition, by using the part of unalocated space.
BUT I dont want to do the following:
Backup data from LUKS partition
Delete LUKS partition
Create new bigger LUKS partition
Restore data to the LUKS partition
View 1 Replies
View Related
Feb 10, 2010
I've been upgrading a Fedora server over the years. Once it was Fedora Core 2 now it is Fedora 10. Now I want to continue the upgrade process and upgrade the server to Fedora 11. The problem is that the boot partition is 100MB but Fedora 11 wants a 200MB boot partition. Looking at Fedora 13 it seems a boot partition of 500MB is gonna be the norm. I would just resize the boot partition but there is a LVM directly after it taking up the rest of the drive.
How do I resize my boot partition in this scenario?
My current line of thought is to use G4L to backup both partitions, then restore the boot partition to a large drive, increase the size with parted then restore the LVM backup after it.
So far G4L has been reluctant to backup the boot partition of Fedora on a test rig to an NTFS drive. Not sure if I should be backing up the image to a ext3 drive.
View 8 Replies
View Related
Mar 3, 2010
I have read several tutorials on how to install it on my Laptop with pre-existing XP without destroying XP in order to get a dual-boot system. For example on those two pages...
[URL]
and
[URL]
...it reads that in the Ubuntu install menu I have to select "manually edit partition table", which I have found and selected, and then I should supposedly be able to edit the size of the desired partition. However, no option for changing the partition size appears. Instead I get a menu where I am asked to determine how I want to mount the partition (as ext4, ext3, etc.) and if I want to format it. However nowhere it mentions anything related to "change size" or similar.
View 9 Replies
View Related
Jun 20, 2010
i can't resize my partition sda1?
View 3 Replies
View Related
Jul 25, 2010
I made three partitions when I installed Ubuntu. Ubuntu 20.1 gig. windows 20.1 gig. data 110 gig
I no longer want or need the windows partition. so I used system > administrator> disk utility to delete the windows partition. Now to hopefully prevent a problem. How do I enlarge the Ubuntu partition without causing problems?
Can I do it while I am ubuntu or do I need to do it from the live cd or what?
View 1 Replies
View Related
Aug 12, 2010
I am trying to resize a Windows XP partition. The partition has plenty of space available. When I boot off the CD, I open Gparted. I try to move the partition down, but it does not move at all.
Within this Windows installation, it only shows 1% fragmentation.
I want to dual boot using two partitions.
View 8 Replies
View Related
Sep 17, 2010
I have a laptop with a 320GB disk. Windows 7 and Ubuntu 10.04 It has 8 partitions: [From Testdisk]
[code]....
Long story short, after reinstalling windows 7 and messing around a little with its partition and the other ntfs one (resizing etc); Gparted won't open the disk. It shows all the disk as unallocated space, And throws a message to the terminal which says something like "Can't have a partition out of the disk." Funny thing is that *almost* everything is working fine. Everything works except that ubuntu can't use the swap. (Dmesg says: "Swap area shorter than signature indicates") Also, testdisk, if i run a deep search for partitions, finds the last partition twice, but the second time the partition goes from 37129 0 1 to 40240 254 63 , while the disk ends at 38913 255 63. The problem is that I can't use Gparted now and I want to resize a partition.Also I believe that going without swap is not good for ubuntu.
View 2 Replies
View Related
Oct 15, 2010
I am dual booting Windows 7 and Ubuntu on my laptop, and I'm trying to resize my ubuntu partition to make it larger. When I boot from the GParted Live disc , however, It only recognizes the existence of my 160 Gig windows NTFS partition which has ~15 Gigs of free space, which I want to reformat and expand ubuntu into (I freed that space by shrinking my windows partition from inside windows 7). I know my Ubuntu partitions are there (I'm in Ubuntu now, plus my HD is 200 Gigs not 160), but I can't see them.
I have a feeling this has something to do with my resizing of my windows partition from windows, but I'm not sure.
more info:
Code:
sudo fdisk -lu
Disk /dev/sda: 160.0 GB, 160041885696 bytes
240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
[Code]....
View 4 Replies
View Related
May 4, 2011
I'm dual booting Win7 and Maverick and I'm running low on diskspace on my Ubuntu partition.I booted into an Ubuntu 10.10 live CD and opened Gparted. After shrinking the storagepartition I wanted to grow the extended ubuntu partition into the unallocated space to the left, but for some reason it won't let me do that.
View 7 Replies
View Related
Jun 20, 2011
I want to resize my linux partition using gparted. The partition in my hdd right now looks like this:
Uploaded with ImageShack.us
I dont want to screw this up, I know I have to use the gparted boot disk. But really, can anyone give me sort of step by step guide of how to resize my linux partition ( I was thinking in expanding it from the current 25gb to 30gb).
View 3 Replies
View Related
Jun 23, 2011
I created only two partitions, root and /home. I want to resize root to a bigger value. I tried to play a little with parted without result. How can I do it safely?
View 6 Replies
View Related
May 6, 2010
How do I resize an ext4 partition including moving the start address? Actually what I want to do is extend the partition in front of it but that means first making space between partitions 1 and 2.As best I can tell resize2fs will resize the partition but not let me move the start addres. And fdisk will run, on say /dev/sda3 (the one I want to resize), but its default display doesn't show a start and end address which leads me to believe that fdisk isn't going to do what I want either.
View 8 Replies
View Related
