OpenSUSE Install :: 11.2 Destroyed 2nd Partition?
Nov 25, 2009
I had opensuse 11.0 on a system at home. Decided to install 11.2 since I had read that 11.2 can do upgrades from then forward.Well I fiddled with the partitioning settings, made sure that it was configured exactly like it was before - /dev/sda1 is /; /dev/sda2 is swap, /dev/sda3 is /max.I knew I would have to do a clean install, but thought it would not touch my other partition /max. I explicitly told it to NOT format /dev/sda3.Well when it booted, it goes into maintenance mode - says my partition is hosed. fsck tells me that maybe my /dev/sda3 is a zero length partition.Hallelujah that I turned off my external drive.So,for sure I will NOT be installing 11.2 on my other two systems at work.Now that my entire machine at home is a vegetable, think I might go take a look at Debian. This is not fun.Thought Linux would be a bit better than Windows in this respect.
View 9 Replies
ADVERTISEMENT
Jan 19, 2010
I was trying to perform a new install, so sensibly made a back-up of my data to my external drive. Unsensibly, I didn't unplug the disc before starting the install and the install trashed the partition table/FAT on the external drive.I've used disktree and can "see" that the disk has lots on it, but I cannot access it.
View 9 Replies
View Related
May 20, 2011
Caution to all using ati graphics download repository. I have been using SUSE 11.4 after an upgrade from 11.3 through zypper for months. I added ati graphics as a update repository. Software update installed two ati files. I did not notice their names.
Upon installation my graphics was acting funny so I uninstalled the two ati-files figuring I'd be back to where I was. Now I can only get into terminal window after reboot at both runlevel 3 and 5; no graphics at all. I keep getting message re: display 'null' I wish to return to original graphics configuration prior to ati downloads which, I believed used xorg drivers.
I believe I either need to revise xorg.conf file back to original which was overwritten by ati process or reinstall xorg/X11 related files. I have an ati radeon HD 3450 agp card. 32 bit SUSE w/11.4 installed and running. Anyone have a sample xorg.conf that might work or some other ideas of how to get back to where I was.
As a related question, if I do a fresh reinstall of SUSE 11.4 using dvd can I save my /home files and any /filesystem files that my special software created in root directories.
View 9 Replies
View Related
Jan 1, 2010
My problem isn't directly related to ubuntu or linux, but I figured that my best chance at a fix would be on ubuntu forums. The problem is that every time I reboot my computer, my partition table gets destroyed. I tried fixing it with testdisk and gparted, but as soon as I rebooted, everything is back to broken. So far I've troubleshooted to the point where I know it's not an operating system's fault. I'm hoping it's nothing more severe than a bad hard drive.
View 3 Replies
View Related
May 20, 2010
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
View 2 Replies
View Related
Oct 9, 2010
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3
sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code:
root@PartedMagic:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
[code]...
View 9 Replies
View Related
Apr 3, 2011
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
View 9 Replies
View Related
Apr 21, 2010
I have little experience with Linux, took a course, read bulletproof linux. That was several years ago. My friend convinced me to set up opensuse kde with him, so I did.Set it up a few days ago on my semi-new Hitachi 1TB drive. XP was installed first, cloned from the previous (failing) drive, and took me forever to get it working.It was set up as:
Hitachi HD:
1st part: XP (250gb)
2nd Part: opensuse system
3rd Part: opensuse swap
4th Part: opensuse data
(2/3 may be swapped)
I still had 600GB unpartitioned and went to add a new 250GB partition via windows xp disk manger.Next thing I know, disk manager freezes and errors. I reboot for other reasons, and am greeted by grub (never used it before) stating ..well stating nothing.I tried the opensuse install DVD repair option and got corrupted video at first. Then I tried safe settings for booting the installer.I'm now in the YaST2 repair manager.I tried to recover partitions, but it's locked to scan only Partition 1, which is my XP partition. It says no valid linux root partitions exist.
I also tried loading the linux root partition with grub (didn't know the namescheme for the HD's, but I think it's devsda for HD0), no dice. I can't seem to find any hard drives through grub, but I'm unfamiliar with it.My goal is to get my xp back up and running. My guess is that XP tried to edit the partition table and screwed up something.The partition listing through YaST2 partmanager shows all my partitions.A good walkthrough would be great too, but at the moment I'm just going Really? It was that easy to annihilate all my bootable systems? I could also nuke the linux partition and use XP's recovery console and fixboot, then worry about the linux later. I haven't gotten it set up completely yet.
View 9 Replies
View Related
Jan 14, 2010
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
Feb 21, 2010
so i have a main drive (320gb) which currently has kubuntu 9.04 installed.i also have a side drive (60gb) on which i made a backup of all my windows files (i wanted to migrate to new windows OS but messed up, long stupid story...) and also had opensuse 11.0 installed.now when i open either 2 linux versions, the ntfs partition isnt recognised anymore.there are files on it that i need, including the iso of the windows version i want to install next to opensuse (just like my old windows version)
View 5 Replies
View Related
Sep 29, 2010
I'd like to reinstall openSUSE 11.3 on a pc and would like to preserve the /home partition. The current partiton structure is
sda1 /boot
sda2 /swap
sda3 /extended partition
sda4 /
sda5 /home
When the installer gets to the point to set up the partitions it offers something like
sda1 /
sda2 /swap
sda3 /home
I'm not sure which option to take now. I assume I choose the option to edit the partitions but I'm not clear how to preserve the /home as it's now got a different partition number or does that no matter as long as I choose not to format it? Also, to replicate the original partition structure I'd need to delete the partitions and add them in the correct order but would that destroy the /home?I'm a bit confused with how it will work.
View 2 Replies
View Related
Dec 8, 2009
I did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?
View 3 Replies
View Related
Feb 22, 2010
I got a hold of openSUSE11.2 recently, burned it, and booted the disc up.Now i got a problem.I ain't too experienced in partitioning, so i choose everything as selected in the installation(i downloaded the full DVD, not a live CD)and i got to the partitioning part.I have this:
500GB WD Caviar Blue SATA2
80GB ATA
I installed Ubuntu on the 500gb with wubi and partitioned 30GB for it.Well that one is easier, i have absolutely no experience in installing from a CD/DVD.I saw instlux, but it wouldn't run from Win7 Any guide on how to manually partition 30GB for openSUSE too?
View 3 Replies
View Related
Jun 1, 2010
I've just recently decided to try Linux, but I want to keep Windows 7 on my computer as well. This is also the first time messing with things like partitions. Could anyone lead me to a good site where I can figure out how to partition my hd, dualboot openSUSE, and fix any problems that may occur?
View 9 Replies
View Related
Jun 3, 2011
I am almost newbie at Linux OS, but I want to install openSUSE. Unfortunately I have some programs which probably will not work on Linux, so I want to have a Windows 7, just in case. I will partition my 250 GB HDD as follows:
1. openSUSE partition/s (... GB)
2. Windows 7 system partition (100 MB)
3. Windows 7 partition (30 GB)
4. My files' partition (the rest unallocated space) - I wish both OS's to read this partition, that's why it will be NTFS.
I would like to know how many and how big the openSUSE partition/s should be. Could it be installed on one partition, or it requires separate swap, root, etc. ones?Does those NTFS partitions slow down openSUSE?
View 4 Replies
View Related
Feb 12, 2010
Just out of the blue, the layout of my 10.10 Opera was destroyed. If you take a look at the attachment you will see that Class: tag everywhere. How the heck did it appear and how can I make it work like it did before?
View 4 Replies
View Related
Sep 2, 2010
I can now no longer access my desktop. the only way I can access ubuntu is through the recovery kernel, and logging in through the command prompt. I installed this theme using install.sh also with the package is uninstall.sh though I can't access it through commands.
What happened is I downloaded the package,extracted it and ran the install.sh. It went through all of the setting up that it was supposed to do and in the end looked like it was working like it was supposed to. However my compiz got shut off so I decided to turn it back on through the desktop settings. Everything looked fine, I hit ok to accept the settings then that's when my screen went haywire. Everything on the screen was blown apart so I had to reboot, hoping that would fix it. now when I try to log back in It will go to the splash screen then go all black before the login page.I've tried resetting Gnome with rm -rf .gnome .gnome2 .gconf .gconfd .metacity though that will not work either. I guess I need to have access to the desktop for that to work. I don't know what to do, can my Os be saved or am I looking at a reinstall.I think if I can disable compiz perhaps long enough to boot I might be able to get rid of that theme. thoug I can't find any info on how to do it. everyanswer I find is based on having the desktop running and using gtk programs such as metacity --replace.anyone have any ideas on how I can access my desktop again?
View 2 Replies
View Related
Jan 23, 2010
I'm using 1TB BIOS Raid stripe 0 (Intel 82801ER ICH5R) and I want to use this configure to install Opensuse 11.2 is this correct?
1GB for /boot
5GB for swap
100GB for /
Rest of disk for /home
And other question is when I install on this configure sometimes setup hangs after finishing copying file and restart to enter configuration section.
View 7 Replies
View Related
Feb 5, 2011
When I loaded opensuse 11.3 for the first time, I used the automatic partitioner and have been loading app's onto my ~8GB boot partition, and now that it's full, I have ~15 GB free on my home partition and need to install a few more app's to get my laptop fully functional. Is there a way (other than copying the boot partition to the home partition and then repartitioning, copying again to the repartitioned drive, and then recopying again to the freed up space) to get the new app's I install to redirect to my home partition?
View 9 Replies
View Related
Jul 11, 2009
I have stellarium 0.10.2 but whenever I run it, it does not save my settings. A look at its output is:
Code:
$ stellarium
QProcess: Destroyed while process is still running.
[ This is Stellarium 0.10.2 - [URL] ]
[ Copyright (C) 2000-2009 Fabien Chereau et al ]
Writing log file to: "/home/arthur/.stellarium/log.txt"
File search paths:
0 . "/home/arthur/.stellarium"
1 . "/usr/share/stellarium"
Config file is: "/home/arthur/.stellarium/config.ini"
Sky language is: "en_US"
Application language is: "en_US"
Loading Solar System data ...
Loaded 38 / 38 planet orbits
Loading star data ...
Loading "stars_0_0v0_1.cat": 0_0v0_1; 5013
Loading "stars_1_0v0_1.cat": 1_0v0_1; 21999
Loading "stars_2_0v0_1.cat": 2_0v0_1; 151416
Loading "stars_3_1v0_0.cat": 3_1v0_0; 434064
Finished loading star catalogue data, max_geodesic_level: 3
navigation/preset_sky_time is a double - treating as jday: 2.45151e+06
Loaded 10051 / 13226 NGC records
Loading NGC name data ...
Loaded 222 / 222 NGC name records successfully
Loaded 88 / 88 constellation records successfully for culture "western"
Loaded 85 / 85 constellation art records successfully for culture "western"
Loaded 89 / 89 constellation names
Loading constellation boundary data ...
Loaded 782 constellation boundary segments
Loading star names from "/usr/share/stellarium/skycultures/western/star_names.fab"
Loaded 230 / 230 common star names
Loading star names from "/usr/share/stellarium/stars/default/name.fab"
Loaded 3215 / 4359 scientific star names
Creating GUI ...
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
try_pbo_zcopy: failure 2
The failure continues for as long as the app is running.
View 14 Replies
View Related
Jan 19, 2010
OK so i burn a copy of 9.10 to a CD and started up the live desktop, when i got in i started up gpart. i desisted to give 40 GB to ubuntu i put in the numbers and came out with a 39.04 GB empty partion, so i toyed with it to try to get to 40 on the nose. this is the point where i should have walked away while i was ahead but i did't, i kept toying with it till i was almost there, but when i finally got it i realized i still had to finalized the changes so i hit the green check mark and let it run after 10 min's of gpart was reading my entire 180 gb partion which i had windows on. i grew in partion, and i remembered it was much quicker in the past when i partioned from inside the install so foolishly not knowing what i was doing i hit cancel. then my heart stopped when i saw the word unknown where it used to say ntfs. i relised i just destroy my windows install. i started to panic, because my backup of all my files where on another computer and guess what 3 days ago the hard drive died on it and i never got a chance to back up the stuff from this one to somewhere else. then i relised i had a 10 gb factory installed backup partion. so i restarted the machine and got nothing operating system not detected, and when i trying to got to the started up menu i didn't have the option to boot in recovery mode which i was expecting. but i had one last saving grace i upgraded from vista to 7 for free and still have the install disk, so i started up the install disc and selected recovery mode after trying automatic recovery and falling i tried restore from system image, it couldn't find the partion, as a last ditch effort i tryed system restore and as expected failed
i am at my wits end and have no idea what to do next short of wipe the drive and do a clean install, which i relay don't want to do because I'll lose all my data.
View 9 Replies
View Related
Apr 8, 2010
I have a 53GB HDD were I'd like to install openSUSE11.2.How should I partition it? What sizes to allocate for /, home, swap (should I make other partition separately?) and also what file system should I use?
View 9 Replies
View Related
Aug 1, 2010
I tried to install openSUSE 11.3 from the Gnome live CD. I have two disks in my system, one with a Windows Vista x64 install, and another with a Vista x86 install which I no longer need and quite a bit of free space. I want to install Linux on it. I switch OS's by switching the boot disk in BIOS, so I don't really need a boot manager, but openSUSE installs GRUB by default, so I used it.
The Vista x86 partition is a primary partition at the start of the disk, and after it there's an extended partition with quite a few logical partitions. At the end of this extended partition I added partitions for swap, / and /home (ext4 all), and a new primary partition at the end for /boot. (I actually created these for a failed Linux Mint install, but I used them and reformatted during the openSUSE install.)
I made the Vista x86 inactive and the /boot partition active, and this works. At least, I get as far as seeing a menu which I guess is GRUB. Before that I get "Error 22: No Such Partition". If I choose openSUSE from the GRUB menu I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
I booted from the live CD again and checked the /boot, / and /home partitions, and they contain data, so they must be formatted fine.
View 9 Replies
View Related
Sep 11, 2015
I've found a serious bug in KMail 4.14.1 (Debian 8): When you delete an attachment from an HTML message, all other content of that message (i.e. the whole body part) will be destroyed.
How to reproduce:
Create an HTML ("Rich Text") e-mail message and save it as draft (or send it if you like)
Mark your saved (or sent) message, right klick on the attachment and choose "Delete Attachment"
The content of the body will be replaced with text like this:Code: Select all. You deleted an attachment from this message. The original MIME headers for the attachment were:
Content-Type: application/pdf
name="test.pdf"
filename="test.pdf"
This problem is specific to HTML (Rich Text) messages. It doesn't apply to plain text messages.
View 1 Replies
View Related
Jul 26, 2010
I'm a GRUB novice, unfortunately. My system is a 7-year old Dell tower. Two hard drives, each sliced up into a bunch of ~30 GB partitions. I dual-boot WinXP and Ubuntu Karmic Koala 9.10. I think I have GRUB2, but don't know how to check without being able to boot. This problem arose during a standard upgrade when I didn't pay attention and GRUB updated and apparently destroyed itself. Now when I boot my system, I get the following message:
Code:
Booting from local disk...
GRUB loading.
error: no such disk
grub rescue>
Almost every fix I found in my searching involved:
Code:
grub> find /boot/grub/stage1
but none of the solutions said what to do if that file wasn't found.
When I boot from my Ubuntu install DVD, I can mount my various partitions and browse their filesystems, so it appears that my data is all still intact, I just can't get to it. What should I try next?
View 9 Replies
View Related
Aug 3, 2010
I have a sister-in-law, married to an accountant who lives and breathes WinSoftware. I worked hard at convincing her to switch to the simplest Linux available imho, an Ubuntu, latest edition.She tried it, worked fine, was happy.Thenstarted to kernel update.It destroyed the 'boot on Windows' option I had setup, making it a daily pain for her husband to get on his Windows. I need not insist on the fact that Linux won't ever be back on that computer, because Ubuntu's update scripts can't do something as simple as check if Windows is the primary boot
View 3 Replies
View Related
Nov 27, 2009
my desktop has two hdd(sda+sdb recognized as (hd1)and (hd0)respectively..)sda has vista on it. sda is comprised of several simple volumes which vista calls dynamic ntfs..sdb has four primary partitions: sdb1; sdb5,sdb6, sdb7. sdb5,6,7 are extended partitions,together put as sdb2.
sdb5 for swap, sdb6 for (/)(does this mean root partition? but /root and /home are on the same level..), sdb7 for /home; this is suse 11.0.I delete the last simple volume of sda, and divided it into three partitions: sda8,9,10. sda8 for swap, 9 formatted as ext3 for /home, 10 formatted as ext4 for /.And I want to keep the current grub, so I chose the boot loader location to "Boot from Root Partition" in Boot Loader Settings. At the last minute of installtion, a dialog tells me:
Code:
grub> setup --stage2=/boot/grub/stage2 --force-lba (hd1,9) (hd1,9)
Error 22: No such partition
grub>quit
(hd1,9) is surely sda10 which is mounted to '/'. why would grub not recognize this partition?
This error message always shows up whenever I boot to "rescue installed system" from dvd and try to reinstall grub to root partition, ie. (hd1,9). I tried to put one entry in the menu.lst of suse 11.0 :
Code:
title openSUSE 11.2
rootnoverify (hd1,9)
chainloader +1
But instead of boot into 11.2, it gives me a message "No such a partition"Until now the only successful boot into suse is through the dvd rescue mode-> boot into installed systems. later tries all failed.. with a message "modprobe: FATAL: Could not open.ko", the screen freezed, number led indicator and caps lock led both flashing on and off. I had to press the RESET on the box..
the good thing is suse 11.0 is still bootable, the current grub not crumbled..but the strange is grub cannot be installed. maybe it's due to ext4 format? In 11.0 if I try to mount /dev/sda10 to /mnt, it would say unknown file system 'ext4'.
View 9 Replies
View Related
Dec 31, 2009
I want to intall openSuse 11.2 and I don't know how to do the partition correctly. My PC run with windows vista.
This is how I made the partition:
dev/sda1: windows
dev/sda2: linux /
dev/sda3: linux swap
After the installation openSuse don't boot!
View 9 Replies
View Related
Jan 1, 2010
I installed openSUSE 11.2 on an external HDD to test. I think it's brilliant, and want to move it to an internal HDD. What is the best way to do this? I don't want to lose all the programs / tweaks I've made to SUSE so far.
Coming from the Windows' world, it's as easy as taking an image of a partition and restoring it over a new HDD partition.
View 5 Replies
View Related
