I want to intall openSuse 11.2 and I don't know how to do the partition correctly. My PC run with windows vista.
This is how I made the partition:
dev/sda1: windows
dev/sda2: linux /
dev/sda3: linux swap
After the installation openSuse don't boot!
i just installed OpenSuse 11.2 whiteout problems, once finished i reboot my eeepc, but the startup stops at :
Code:
Starting udevd:
Loading drivers, configuring devices
I have a few machines set up to run off in the corner without monitors attached. I installed 11.3 (32-bit) on a couple of them and they run fine during setup but then I move them to the corner with no monitor attached and they won't boot correctly.
By this I mean they still run some apps I setup to run automatically from daemon scripts, but I can't ping or access the machines at all. It's almost like they aren't booting all the way up. Hooking a monitor up fixes this but I don't have enough monitors to keep these hooked up like this.
I have a couple of other 11.3 systems that are setup almost the same way but I put graphics drivers on those and they work with or without monitors attached. I don't want to have to put graphics drivers on those systems.
opensuse v11.3
linux 2.6.34.8-0.2-desktop x86_64
It took me 3 tries to get is ISO image that matched the md5 checksum on the download site. At 8 - 10 hours each it was a PITA. The first simply aborted 1/3 of the way through (HTTP direct link). The second used wget, got a full file but the checksums didi not match. The magic method was Bitorrent.
All this has left me with an uneasy feeling about the contents of the DVD created from the ISO. Is there a way to test the DVD contents?
I recently installed SuSE 11.4 (kernel 2.6.37.6-0) and it all works very nicely EXCEPT for the KDM login. I am using kde 4.6.0 and have the latest updates for 11.4 installed and at install time, I left the automatic Login box checked which works ok. However, when I go to the 'Personal Settings - configure desktop' and change the Login - convenience' to UNcheck the Auto login box, it does not change the Login action - I stlll login (without a login name and password screen appearing). I have looked at the file - /usr/share/kde/config and the kdmrc file does change to read 'autologin' true (or false) when I make the changes in the configure desktop GUI, but this has no effect on my actual ability to 'login' automatically all the time!
View 1 Replies View RelatedI installed 11.4 and it seems to be working fine. To run few windows application I need WINE. I installed WINE using YAST Software Manager. But when I install application in WINE it's not working correctly. The same application is working fine in MINT/WINE.
View 2 Replies View RelatedFirefox informed me that I should get the latest version. I naively listened to that voice, and was taken to a download screen. I downloaded it. I was hoping for a self-installer, because I'm used to windows. It opened in KPackageKit, or something named similar. I extracted it to my documents, because frankly, I have no idea where to extract it to. Anywhere's I've looked says that most software comes as a package, which you can search for and install in YaST. I searched for "firefox", and nothing new came up. how to extract things to the right place/install them correctly with YaST?
View 2 Replies View RelatedI have this problem for a while but didn't notice it until lately(i did reboot the machine for few months). Now that i reboot it frequently i notice that the clock is always not what is supposed to be. I'm in Toronto, Canada so it should be GMT -5:00. Sometimes it shows GMT-6, sometimes -10, now is GMT -11. Anyone would know why i have this issue? I'm running Suse11.1 on a 64 bit. My laptop which runs on 32 bit is working fine.(well probably different versions for kernel and kde.(whatever was in th repository to be updated i updated)
2.6.27.39-0.2-default
Version 4.3.4 (KDE 4.3.4) "release 2"
i have an external harddrive which i encrypted scince opensuse 10.2 with luks. Now i installed opensuse 11.2 its impossible to me to mount this drive correctly.
the harddrive was recocnized in my former opensuse 11.0 correctly as luks encrypted and during installation yast installed the kernel module and encrypted the harddrive so that i regulay could mount it on boot by giving the password for that harddrive. Scince opensuse 11.2 however yast thinks this is an dmcrypted partitoon and tries to unlock the harddrive using dmcrypt which of course fails.
does somebody know how i can encrypt and mount the externeal drive automaticly?
i have made a backup of /etc before i made a new installation of opensuse 11.2. is the possible to use the old fstab entries for that after installing luks?
I just installed SUSE 11.2 from a downloaded DVD The installation went correctly but now I boot up the computer and when the login screen appears there will be no box highlighting a user or even a blank box to input user. The restart, suspend and shutdown buttons are not operational. However, if I power down the computer manually and restart the login screen comes up normally.
View 2 Replies View RelatedSome month ago I installed openSUSE 11.1. It worked not bad, but I wanted to get the newes release of Firefox. So I did an upgrade to 11.2. Yast2 refused to work with an error message: unknown option -s (or similar). The regular updates didn't work also. Then I decided to do a new installation. Now I'm having a new problem: Display settings (Anzeige-Einstellungen) reports: Monitor unknown (Monitor unbekannt).
Possible resolution settings are: 800 x 600; 640 x 480; 400 x 300; 320 x 240;
Possible refresh rates are: 60 Hz or 56 Hz @ 800 x 600
I need 1024 x 768 @ 76 Hz. In the previous installation it worked well. How I can teach openSUSE to run 1024 x 768 @ 76 Hz?
YAST2 Hardware information shows me in Monitor > Monitor > Resources > Resolution: High: 768; Vertical frequency: 76; Wide: 1024
The VGA controller is also correct shown in Display > 3d Blaster Savage 4
Things were running fine until GNOME misbehaved;
GNOME failed to load telling me:
Install error, Configuration defaults for GNOME power manager have not been installed correctly.
So I
Code:
To the shell and check the logs in gdm and find this:
Could not ask power manager if user can suspend, launch helper exited with unknown return code 0.
So I try
Code:
To see if another user will get the desktop; I get the error
Cant create etc/passwd no space left on device.
So I
Code:
And get the following
I insert a usb drive to prepare for back up; Run
Code:
On the shell to get the usb device name; Then run
Code:
To mount the device.
I end up with:
Cant create lock file /etc/mtab~ 4610 No space left on device(use -n flag to override)
So, I
Code:
And see 9 partitionitions
Code:
Again to check which ones are loaded at boot up time and get
plus some other file systems mounted at boot up, but not mapping to any physical partitionition.
I try
Code:
On partition9 and get warnings because its mounted, so I chicken out and try
Code:
And run into the error:
cant create lock file /etc/mtab~4832 no space left on device (use -n flag to override)
Good thing is there is a
Code:
Since space is a problem, I
Code:
On partition6 which is not mounted at boot up time and try to
Code:
I still get the error
cant create lock file /etc/mtab~4735 no space left on device (use -n flag to override
Code:
For package update tells me
cant open /var/run/zypp.pid in mode w
Code:
For power management tells me its not even recognised as a command.
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3
sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code:
root@PartedMagic:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
[code]...
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
View 9 Replies View RelatedI am trying to mirror partitions from one harddisk to another.dd if=/dev/sda7 of=/dev/sdb7 bs=4k conv=noerror 2Strangely, it refuses to copy anything inside the www directory. I've tried many times with the same result - /var/www is empty in the target harddisk.I do this all the time without any problem on Etch. On this Lenny box, mirroring other partitions seems fine except for /var.
View 4 Replies View Relatedmy "places menu" references folders on a second partion, where I store all my personal files (ntfs, as I use it also from Windows). After boot those folders wouldn't show in Thunar. Some other programs, as Fontmatrix, wouldn't find databases stored there, what messes them up. Thunderbird has problems to recognize profiles etc.What is strange, the partition seems to be mounted at startup as I can see and select it from Thunar. Also, it appears on Desktop. After selecting the partition, closing and reopening Thunar everything works fine, places would show correctly and Fontmatrix database is ok
View 2 Replies View RelatedWhen I installed Wicd, and ran it for the first time, I got an error something like: "Could not connect to Wicd's dbus session- check the Wicd log file for more info". However, later when I restarted my computer, Wicd started, but I can't connect to my network, it shows up as <hidden>, I can connect to linksys, so I know that wireless is working on that computer. I know that there's nothing wrong with my wireless router, because I can connect to my network in this computer.
View 3 Replies View RelatedI have little experience with Linux, took a course, read bulletproof linux. That was several years ago. My friend convinced me to set up opensuse kde with him, so I did.Set it up a few days ago on my semi-new Hitachi 1TB drive. XP was installed first, cloned from the previous (failing) drive, and took me forever to get it working.It was set up as:
Hitachi HD:
1st part: XP (250gb)
2nd Part: opensuse system
3rd Part: opensuse swap
4th Part: opensuse data
(2/3 may be swapped)
I still had 600GB unpartitioned and went to add a new 250GB partition via windows xp disk manger.Next thing I know, disk manager freezes and errors. I reboot for other reasons, and am greeted by grub (never used it before) stating ..well stating nothing.I tried the opensuse install DVD repair option and got corrupted video at first. Then I tried safe settings for booting the installer.I'm now in the YaST2 repair manager.I tried to recover partitions, but it's locked to scan only Partition 1, which is my XP partition. It says no valid linux root partitions exist.
I also tried loading the linux root partition with grub (didn't know the namescheme for the HD's, but I think it's devsda for HD0), no dice. I can't seem to find any hard drives through grub, but I'm unfamiliar with it.My goal is to get my xp back up and running. My guess is that XP tried to edit the partition table and screwed up something.The partition listing through YaST2 partmanager shows all my partitions.A good walkthrough would be great too, but at the moment I'm just going Really? It was that easy to annihilate all my bootable systems? I could also nuke the linux partition and use XP's recovery console and fixboot, then worry about the linux later. I haven't gotten it set up completely yet.
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedI am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View Relatedso i have a main drive (320gb) which currently has kubuntu 9.04 installed.i also have a side drive (60gb) on which i made a backup of all my windows files (i wanted to migrate to new windows OS but messed up, long stupid story...) and also had opensuse 11.0 installed.now when i open either 2 linux versions, the ntfs partition isnt recognised anymore.there are files on it that i need, including the iso of the windows version i want to install next to opensuse (just like my old windows version)
View 5 Replies View RelatedI'd like to reinstall openSUSE 11.3 on a pc and would like to preserve the /home partition. The current partiton structure is
sda1 /boot
sda2 /swap
sda3 /extended partition
sda4 /
sda5 /home
When the installer gets to the point to set up the partitions it offers something like
sda1 /
sda2 /swap
sda3 /home
I'm not sure which option to take now. I assume I choose the option to edit the partitions but I'm not clear how to preserve the /home as it's now got a different partition number or does that no matter as long as I choose not to format it? Also, to replicate the original partition structure I'd need to delete the partitions and add them in the correct order but would that destroy the /home?I'm a bit confused with how it will work.
I did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?
View 3 Replies View RelatedI got a hold of openSUSE11.2 recently, burned it, and booted the disc up.Now i got a problem.I ain't too experienced in partitioning, so i choose everything as selected in the installation(i downloaded the full DVD, not a live CD)and i got to the partitioning part.I have this:
500GB WD Caviar Blue SATA2
80GB ATA
I installed Ubuntu on the 500gb with wubi and partitioned 30GB for it.Well that one is easier, i have absolutely no experience in installing from a CD/DVD.I saw instlux, but it wouldn't run from Win7 Any guide on how to manually partition 30GB for openSUSE too?
I've just recently decided to try Linux, but I want to keep Windows 7 on my computer as well. This is also the first time messing with things like partitions. Could anyone lead me to a good site where I can figure out how to partition my hd, dualboot openSUSE, and fix any problems that may occur?
View 9 Replies View RelatedI am almost newbie at Linux OS, but I want to install openSUSE. Unfortunately I have some programs which probably will not work on Linux, so I want to have a Windows 7, just in case. I will partition my 250 GB HDD as follows:
1. openSUSE partition/s (... GB)
2. Windows 7 system partition (100 MB)
3. Windows 7 partition (30 GB)
4. My files' partition (the rest unallocated space) - I wish both OS's to read this partition, that's why it will be NTFS.
I would like to know how many and how big the openSUSE partition/s should be. Could it be installed on one partition, or it requires separate swap, root, etc. ones?Does those NTFS partitions slow down openSUSE?
I'm using 1TB BIOS Raid stripe 0 (Intel 82801ER ICH5R) and I want to use this configure to install Opensuse 11.2 is this correct?
1GB for /boot
5GB for swap
100GB for /
Rest of disk for /home
And other question is when I install on this configure sometimes setup hangs after finishing copying file and restart to enter configuration section.
When I loaded opensuse 11.3 for the first time, I used the automatic partitioner and have been loading app's onto my ~8GB boot partition, and now that it's full, I have ~15 GB free on my home partition and need to install a few more app's to get my laptop fully functional. Is there a way (other than copying the boot partition to the home partition and then repartitioning, copying again to the repartitioned drive, and then recopying again to the freed up space) to get the new app's I install to redirect to my home partition?
View 9 Replies View RelatedI have a 53GB HDD were I'd like to install openSUSE11.2.How should I partition it? What sizes to allocate for /, home, swap (should I make other partition separately?) and also what file system should I use?
View 9 Replies View Related