OpenSUSE Install :: New 11.2 Install Displays Only In Failsafe
Mar 1, 2010
I installed 11.2/Gnome on Compac Presario laptop - 1.6 gHz AMD processor, 1.25 GB ram and ATI graphics. 74 GB hard drive newly partitioned with Win XP on 55 GB and Suse 11.2 on remainder. Had to fix grub and it now boots into Win ok. On openSUSE boot it stays in console and I can't get a GUI. After login/password I get "Error accessing systemtap module preloadtrace: operation not permitted" I get a GUI and access to yast, system and other stuff if I boot in Failsafe mode. I did a search here but didn't come up with anything - TIA - d
ps Above in boot sequence it says "gdm[1443]: WARNING: Gdm display: display lasted 0.073955 seconds" This was repeated twice with different values then "WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors"
View 9 Replies
ADVERTISEMENT
May 12, 2010
I have 11.2 installed on my laptop but have a bit of an issue. When I boot it normally, it will not use my full screen, instead it only uses about a 5"x5" box in the center and displays there, but when i boot into failsafe, it uses the full screen.
View 9 Replies
View Related
Jun 27, 2010
I just installed 11.3 RC1, but I can only run in failsafe mode. Installation went fine and I'm not having any problems except that when my computer gets ready to launch my login screen it just display garbled graphics. I have tried multiple resolutions and the x11failsafe option, all with a no-go. I did see this error message pop up at the time of garbled graphics on one login: [GPU LOCKUP, switching to software fbcom]
View 1 Replies
View Related
Jul 24, 2010
new bought cheap PC, with pleasure installed 11.3 and then I tried to install Ubuntu 10.04... on grub startmenu see I now only SuSE Failsafe. I want my trusted SuSE ro seen, can not find an handy solution on forums.
View 9 Replies
View Related
Aug 24, 2010
I've installed on my workstation the opensuse 11.2! After the reboot when I enter the username/password, nothing occurs... On the other hand, it's running well with the failsave, why??
Code:
title openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,1)
kernel /boot/vmlinuz-2.6-etc... root=/dev/disk/by-id/ata-etc...
resume=/dev/disk/by-id/ata-etc....
splash=silent quiet showopts vga=0x317
initrd /boot/initrd-2.6.31.5-0.1-default
[Code]...
View 5 Replies
View Related
Sep 11, 2010
I've installed my the ATI drivers as per this link: SDB:ATI drivers - openSUSEHowever when trying to reboot on normal mode the OS opens only tty1 (terminal 1?), you know, the one with green theme background. Fortunately I was able to reboot and log with failsafe. Any ideas why this is happening and how I can fix it?
View 2 Replies
View Related
Mar 22, 2011
So after research decided to go with OpenSuse 11.4 distro.
Installation had no problems but when I try to boot into the normal mode it just gets stuck on the screen that has a loading bar. The loading bar never makes any progress. After having waited for 15min I shut down and booted from failsafe mode. That worked fine twice only and then it prompts me in the command screen for login and password. After I input both it tells me to enjoy but Im still stuck at prompt screen, never loads GUI.
Im now booting windows on my acer Aspire 5633wlmi. It has a Intel Core 2 duo t5500 processor which I understand is 64 bit. So the version of Linux I downloaded was the 64 bit one.
View 9 Replies
View Related
Aug 26, 2010
I have just upgraded from 11.2 to 11.3 using zypper dup (with all the necessary pre steps). After upgrading X does not start with normal boot, only starts with failsafe mode selected. Otherwise the system boots and works in normal mode, only X doesn't start. I have tried to remove and reinstall the radeon driver, but no success. Tried Xorg -configure, with no success.I post my former (11.2) and actual xorg.conf files. Could you help in getting things work normally. If only possible I would like to avoid making a clean install.
View 7 Replies
View Related
Oct 27, 2010
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
View 9 Replies
View Related
May 2, 2011
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
View 9 Replies
View Related
Jul 6, 2011
In summary, after updating from 11.2 through 11.3 to 11.4, normal boot works fine, failsafe mode hangs with two fatal errors - "Module atiixp not found" and "Module ide-pci-generic not found". i would like to fix this a) so I have a recovery position b) so I learn a little more. As 11.2 has gone out of support I decided to embark on the upgrades to 11.3 then 11.4 using the zypper method described on this site. I think failsafe boot worked ok with the original 11.2 install, but I never had to use it in anger, so I can't be 100% sure. I did not test failsafe in 11.3, just checked that the typical cd set of applications seemed ok before proceeding with the upgrade to 11.4.
I have an AMD processor, chip set and an ATI 3800 series graphics card, so I added the ATI repositories for 11.3 and 11.4 as i worked through the upgrades. At 11.4 there were some graphics glitches during normal and failsafe boot which were successfully fixed by adding "nomodeset" to both boot options. Normal boot works fine but failsafe boot hangs with the error messages above. Searching for failsafe boot errors is unhelpful since, in all cases I have checked, normal boot fails too. I did try removing "Xfailsafe" from the failsafe options which produced no change.
I am guessing that, in failsafe mode, the ATI drivers are not loaded into the kernel and the idea is to default to some safer drivers which, in my case, are not present for some reason. However, there seems to be little information on the origin or purposes of atiixp so I don't know how to go about fixing this. I have not really researched the generic pci driver issue, but I am guessing that this is a fall back when the expected atiixp is missing.
View 8 Replies
View Related
Mar 12, 2011
I am big fan of SUSE.. waited like anything for 11.4 release .. but i am in trouble now .. installed 11.4 on Acer 4820TG (switchabe graphics with ATI mobility radeon 5650).. after booting it fails with the attached error while works fine in failsafe mode. Let me know if u need any of the details i am available online for some 5 hours.
View 9 Replies
View Related
Apr 20, 2011
I just installed OpenSUSE 11.4 on a completely blank machine, empty disks, etc. using a Network Install. The install appeared to run OK, but when it rebooted to do the configuration, it hung. I tried a manual reboot a couple of times, then booted in FailSafe mode - came up OK and ran through the auto-config. Now, it still boots up ok in FailSafe, but in normal mode I get the wallpaper on the screen, but it hangs there.
View 9 Replies
View Related
Nov 1, 2010
I am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?
View 3 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Aug 13, 2011
I have opensuse 11.4 installed with both gnome and kde. These are the things I did before the problem:
1. changed the login screen to oxygen login screen
2. Then I logged off and when again logging in, I chose the session as Metacity.
But unfortunately, the the blank splash screen appeared and it didnt get into the desktop. Then I did a hard restart (By pressing the power button). Since then, I cannot login. The login screen is blank left only a active mouse pointer. Even booting into failsafe also didnt work.
By the way, I have chosen the option of directly logging in without password prompt at login. (during installation)
Only a week before i did a clean install since i corrupted the grub, dont wanna install again.
View 8 Replies
View Related
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Mar 4, 2010
My new laptop (ASUS N71Jv) refuses to install Ubuntu 9.10 - it just produces a black screen. I finally managed to get it on there somehow by installing it in safe graphics mode, so now I have to stare at 1024x768. NVIDIA has a new driver (195.36.0 available that may support my graphics card. When I try to install the executable nVidia driver from a terminal, it rightfully complains that X server is still active. Ctrl-alt-f1 or sudo /etc/init.d/gdm stop produce a black screen and a frozen cursor, /sbin/init 3 does nothing.
So what I want to do is simply install the nvidia driver while not being in gnome.
I suspect that my xorg.conf file does not allow anything but 1024x768 (safe graphics mode). It's very frustrating. Any ideas how I can install the driver while being in simple failsafe command line mode or something?
View 3 Replies
View Related
Nov 26, 2010
Last week I successfully installed Ubuntu/Gnome onto a 3 year old Toshiba Vista laptop which worked mostly brilliantly. Today I am trying to install it onto a 4 year old Toshiba XP laptop, but am having problems.
Laptop specs: Intel 1.50GHz 488MB RAM 60GB HDD, partitioned by Ubuntu on install into 30GB/30GB, both partitions over 75% free space The laptop, though old, still functions in XP, and the main reason we're switching it to Linux is that it has issues managing wireless, plus it's fun to do so - learning experience and all. The other laptop has better specs - multiply everything by 2 but Windows was much less reliable as, after all, it is Vista, and switching to Linux there was a necessity.
The Ubuntu is 10.10 and it's the same live cd I used to install it onto the other laptop. It's installed alongside Windows XP and the install proceeded without issue. However when booting in normal mode it becomes unresponsive very quickly - sometimes as soon as the five pips on the loading screen become orange, the last time it lasted a whole 2 minutes before becoming unresponsive.
In failsafe graphics boot it runs without issue. The update manager tells me it's up to date, and I have installed Wine through SPM while typing this. It's behaving as I'd expect it to, with tiny lags on scrolling sometimes (perhaps related to being in failsafe graphics).
Is there some setting (graphics?) I should change to allow it to cope in normal mode? I'm aware 488MB RAM is slightly under the recommended amount, but it evidently can cope in failsafe so would appear to be enough to function?
View 9 Replies
View Related
Jan 30, 2011
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
View 3 Replies
View Related
Feb 2, 2011
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies
View Related
Mar 4, 2011
On my notebook there was a preinstalled OEM Windows 7 Home Basic (disk C, sda1). I installed Ubuntu 10.10 on disk D, and was not using Windows 7 any more, although the "seventh" was present n main loading menu and in grub menu. 2 days ago I discovered, that in grub menu appeared "Windows Vista (Loader) - sda1" ! I didn't install it, and I'm sure that nobody else had access to my notebook. "Windows 7 (Loader)" now links to sda2.
When I try to run this strange "Windows Vista (Loader)", appears the Windows loading screen, than the empty Windows desktop background, and than the system reboots. How can Windows Vista (Loader) appear in grub, if nobody installed it? Can it be an imitation of Vista loader, made by some malware? How to remove this item from grub?
View 4 Replies
View Related
Jun 14, 2010
If I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies
View Related
Jul 18, 2010
In /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
View 6 Replies
View Related
Dec 30, 2009
I have a problem with my computer since it's behaving good in failsafe but is bad in normal mode for example I get no wireless in normal mode.
View 1 Replies
View Related
Jul 27, 2010
I have a problem during installation of openSuse 11.3 on my brand new notebook. It's an hp8440p with Arrandale integrated graphic controller. The initial install works then as soon as the notebook reboots to complete the install and allow me to log in for the first time, there's no video. If I shut the notebook down and boot into failsafe mode the video works. I shut down again and come back up as a normal boot and no video again.
And what's the difference between normal and failsafe?I ran glxgears and had 3d accel in failsafe..
View 9 Replies
View Related
Apr 18, 2010
i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
View 6 Replies
View Related
Aug 4, 2010
After a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?
View 9 Replies
View Related
Sep 29, 2010
I'm running openSUSE 11.3 and screwed some things up so that I can't install anything, including UNetbootin. So I decided to completely reinstall. I'm limited to using my hard drive as there's no CD/DVD or floppy drives installed on the machine and BIOS does not support booting from USB.
I found these instructions - Install any Linux distro directly from hard disk without burning any DVD - Just Another Linux Lover Blog
From the terminal enter these commands
sudo mkdir /distro
sudo chmod `whoami`:`whoami`
cp MYLINUX.iso /distro/distro.iso
Now extract Linux_kernel & Ram_disk to /distro#
Open /boot/grub/menu.lst
#ADD NEW ENTRY#
title Install Linux
root (hdX,X)
kernel /distro/Linux_kernel
initrd /distro/Ram_disk
Reboot and select "Install Linux" from grub. Blog Widget by LinkWithin
Creating the folder "distro" on root was easy and went smoothly. I can't seem to make the second 'whoami' command work, though. I copied-and-pasted "sudo chmod `whoami`:`whoami`" into the terminal. It asks me for the root password, I enter that and then get
chmod: missing operand after `holly:holly'
Try `chmod --help' for more information.
I didn't see anyone reply in the comments of that page saying they had trouble with it, so I think I'm just being an idiot. One person did suggest adding distro at the end on another page and it gets me
chmod: invalid mode: `holly:holly'
Try `chmod --help' for more information.
View 9 Replies
View Related
Jan 19, 2011
i know if u search a solution in forums u get so much confused information. i hope this little manual will help all with the nvidia driver problem! u dont need to edit or create a xorg.conf or something to run the driver correct and u need no blacklistedit too! if u did the standard opensuse 11.3 install its only about 2 kernel packages and the disabling of the x11noveau driver.
1. after standard installing opensuse 11.3 update and install the opensuse softwareupdates
2. install with the yast software re/installer:
(from Desktop or from the terminal. the terminal text command is: yast2)
[Code]...
u dont need to change the menu.lst after all, only u get many problems. run the midnight commander and delete the nomodeset word and the noveau driver would be normally still active after reboot.
View 6 Replies
View Related
