OpenSUSE Install :: 11.4 Only Boots Into FailSafe Mode?
Mar 22, 2011
So after research decided to go with OpenSuse 11.4 distro.
Installation had no problems but when I try to boot into the normal mode it just gets stuck on the screen that has a loading bar. The loading bar never makes any progress. After having waited for 15min I shut down and booted from failsafe mode. That worked fine twice only and then it prompts me in the command screen for login and password. After I input both it tells me to enjoy but Im still stuck at prompt screen, never loads GUI.
Im now booting windows on my acer Aspire 5633wlmi. It has a Intel Core 2 duo t5500 processor which I understand is 64 bit. So the version of Linux I downloaded was the 64 bit one.
View 9 Replies
ADVERTISEMENT
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Aug 26, 2010
I have just upgraded from 11.2 to 11.3 using zypper dup (with all the necessary pre steps). After upgrading X does not start with normal boot, only starts with failsafe mode selected. Otherwise the system boots and works in normal mode, only X doesn't start. I have tried to remove and reinstall the radeon driver, but no success. Tried Xorg -configure, with no success.I post my former (11.2) and actual xorg.conf files. Could you help in getting things work normally. If only possible I would like to avoid making a clean install.
View 7 Replies
View Related
Apr 20, 2011
I just installed OpenSUSE 11.4 on a completely blank machine, empty disks, etc. using a Network Install. The install appeared to run OK, but when it rebooted to do the configuration, it hung. I tried a manual reboot a couple of times, then booted in FailSafe mode - came up OK and ran through the auto-config. Now, it still boots up ok in FailSafe, but in normal mode I get the wallpaper on the screen, but it hangs there.
View 9 Replies
View Related
Oct 27, 2010
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
View 9 Replies
View Related
May 2, 2011
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
View 9 Replies
View Related
Dec 30, 2009
I have a problem with my computer since it's behaving good in failsafe but is bad in normal mode for example I get no wireless in normal mode.
View 1 Replies
View Related
Nov 26, 2010
I just installed Ubuntu 10.10 on a machine with a dodgey graphics card. This machine will break on normal graphics mode but run fine in failsafe graphics mode. I need this machine to be able to be controlled remotely and this is where the problem comes in.
If this machine is being controlled remotely, it may need to be rebooted remotely. Rebooting it into failsafe mode at the moment consists of two prompts: one to put it into failsafe, and the other to "keep it for one session". Does anyone know how to reconfigure Grub or whatever else so it will automatically go into Failsafe Graphics mode without any user interaction? (BTW, where it asked me to "keep for one session" or "reconfigure now", I clicked reconfigure and it didn't do anything. So I need to do it manually)
View 4 Replies
View Related
Jun 27, 2010
I just installed 11.3 RC1, but I can only run in failsafe mode. Installation went fine and I'm not having any problems except that when my computer gets ready to launch my login screen it just display garbled graphics. I have tried multiple resolutions and the x11failsafe option, all with a no-go. I did see this error message pop up at the time of garbled graphics on one login: [GPU LOCKUP, switching to software fbcom]
View 1 Replies
View Related
Jul 24, 2010
new bought cheap PC, with pleasure installed 11.3 and then I tried to install Ubuntu 10.04... on grub startmenu see I now only SuSE Failsafe. I want my trusted SuSE ro seen, can not find an handy solution on forums.
View 9 Replies
View Related
Aug 24, 2010
I've installed on my workstation the opensuse 11.2! After the reboot when I enter the username/password, nothing occurs... On the other hand, it's running well with the failsave, why??
Code:
title openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,1)
kernel /boot/vmlinuz-2.6-etc... root=/dev/disk/by-id/ata-etc...
resume=/dev/disk/by-id/ata-etc....
splash=silent quiet showopts vga=0x317
initrd /boot/initrd-2.6.31.5-0.1-default
[Code]...
View 5 Replies
View Related
Sep 11, 2010
I've installed my the ATI drivers as per this link: SDB:ATI drivers - openSUSEHowever when trying to reboot on normal mode the OS opens only tty1 (terminal 1?), you know, the one with green theme background. Fortunately I was able to reboot and log with failsafe. Any ideas why this is happening and how I can fix it?
View 2 Replies
View Related
Mar 9, 2010
last week I did an update and it may or may not be tied to the fact that now I can only login to Failsafe Gnome mode. I'm running Ubuntu 9.10 - Karmic Koala. I've had Ubuntu for a year but I'm not that familiar with it.
View 1 Replies
View Related
Oct 8, 2010
Whatever settings I use in the power manager, (Ubuntu default Gnome Power Manager) nothing appears to change. Screen brightness does not change when moving the slider, but is reduced after 5 or 10 minutes (haven't timed it. Probably whatever is default) of inactivity, even though the reduce screen brightness checkbox is unchecked. The latter is pretty annoying when watching online TV streams, especially since the video also exits full screen mode when the screen brightness is reduced.
The weird thing is, as the title implies, that when booting in recovery mode with FailsafeX the power settings seems to work. At least the screen brightness varies as the slider is moved I should probably mention that it is possible even in normal mode to adjust the screen brightness by using the buttons for adjusting screen brightness on my laptop (Fn + arrow up/down)
View 2 Replies
View Related
Jul 6, 2011
In summary, after updating from 11.2 through 11.3 to 11.4, normal boot works fine, failsafe mode hangs with two fatal errors - "Module atiixp not found" and "Module ide-pci-generic not found". i would like to fix this a) so I have a recovery position b) so I learn a little more. As 11.2 has gone out of support I decided to embark on the upgrades to 11.3 then 11.4 using the zypper method described on this site. I think failsafe boot worked ok with the original 11.2 install, but I never had to use it in anger, so I can't be 100% sure. I did not test failsafe in 11.3, just checked that the typical cd set of applications seemed ok before proceeding with the upgrade to 11.4.
I have an AMD processor, chip set and an ATI 3800 series graphics card, so I added the ATI repositories for 11.3 and 11.4 as i worked through the upgrades. At 11.4 there were some graphics glitches during normal and failsafe boot which were successfully fixed by adding "nomodeset" to both boot options. Normal boot works fine but failsafe boot hangs with the error messages above. Searching for failsafe boot errors is unhelpful since, in all cases I have checked, normal boot fails too. I did try removing "Xfailsafe" from the failsafe options which produced no change.
I am guessing that, in failsafe mode, the ATI drivers are not loaded into the kernel and the idea is to default to some safer drivers which, in my case, are not present for some reason. However, there seems to be little information on the origin or purposes of atiixp so I don't know how to go about fixing this. I have not really researched the generic pci driver issue, but I am guessing that this is a fall back when the expected atiixp is missing.
View 8 Replies
View Related
Nov 24, 2010
This started a few days ago and I checked back through recently installed packages and nothing looks related. If I boot into ubuntu normally, plymouth looks a mess, but then things boot fine but while the mouse is showing and ubuntu goes about with connecting to networks and so on, but it doesn't register the and input from the mouse or keyboard. It will sleep if you press the power button, but its no more responsive after waking up.
If I boot into recovery mode, and use the failsafe graphics option then everything runs fine. Apart from 3D graphics being pretty slow, which I can kind of understand. I get the same behaviour on all of the last three kernels. I'm running the latest maverick on an HP 6715b. i386 version although the processor is 64 bit compatible. 2Gb RAM.
View 1 Replies
View Related
Mar 1, 2010
I installed 11.2/Gnome on Compac Presario laptop - 1.6 gHz AMD processor, 1.25 GB ram and ATI graphics. 74 GB hard drive newly partitioned with Win XP on 55 GB and Suse 11.2 on remainder. Had to fix grub and it now boots into Win ok. On openSUSE boot it stays in console and I can't get a GUI. After login/password I get "Error accessing systemtap module preloadtrace: operation not permitted" I get a GUI and access to yast, system and other stuff if I boot in Failsafe mode. I did a search here but didn't come up with anything - TIA - d
ps Above in boot sequence it says "gdm[1443]: WARNING: Gdm display: display lasted 0.073955 seconds" This was repeated twice with different values then "WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors"
View 9 Replies
View Related
May 12, 2010
I have 11.2 installed on my laptop but have a bit of an issue. When I boot it normally, it will not use my full screen, instead it only uses about a 5"x5" box in the center and displays there, but when i boot into failsafe, it uses the full screen.
View 9 Replies
View Related
Mar 12, 2011
I am big fan of SUSE.. waited like anything for 11.4 release .. but i am in trouble now .. installed 11.4 on Acer 4820TG (switchabe graphics with ATI mobility radeon 5650).. after booting it fails with the attached error while works fine in failsafe mode. Let me know if u need any of the details i am available online for some 5 hours.
View 9 Replies
View Related
Nov 1, 2010
I am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?
View 3 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Sep 16, 2010
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies
View Related
Aug 14, 2011
I have run into a problem trying to do a DVD upgrade from 11.2 -> 11.4. My computer is setup correctly to boot from DVD ...it boots successfully from the 10.1, 10.3, 11.2 DVD so I don't think there is an issue w/ the BIOS config.
I have run md5sum on the DVD and the generated sum agrees with the values posted on the 11.4 download page so I don't think my media has been corrupted.
When I put in the 11.4 DVD and reboot the machine I see flashing from the DVD activity light and hear the disk spinup.....then it boots 11.2 from the harddisk. how to troubleshoot this...
View 9 Replies
View Related
Mar 19, 2010
recently I have installed a brand new machine with 11.2. Machine boots so incredibly fast so I decided to upgraded another older machine from 11.1 to 11.2. Upgrade went fine but old machine boots significantly slower. On new I see message "doing fastboot" and few seconds later KDE starts loading. Amazing. On old I just experience regular boot, speed is comparable to old 11.1.What am I missing after upgrade? Same kernel, almost same set of services. Both machines are pretty regular PCs/x86_64, however old one have faster/better hardware (more cores, more GHz, more RAM, 2 disks in software raid-0).
View 1 Replies
View Related
Mar 22, 2011
I just did a fresh install of Ubuntu 10.10 and after running the Update Manager and restarting, I get the following message upon boot:
Code:
shpchp 0000:00:01.0: Cannot reserve MMIO region
Too many connections
[code]...
View 9 Replies
View Related
Mar 26, 2010
sometimes it starts but after login (auto login) my wallpaper appears but there in no desktop (taskbar, icons, menu!) and i can't do anything!sometimes if i reboot it goes well sometime not!first time i install openSUSE, i tried to install my VGA driver (Nvidia 9400) but it fails and then i can't boot anymore so i removed and installed openSUSE again!i thinks there is something about graphic and specially Desktop Effects! i don't want to turn it off because it's very nice
View 7 Replies
View Related
Dec 14, 2009
I downloaded the live cd iso and installed it on usb using this command (while it was unmounted):ddif=open SUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdc bs=4M...I then restarted and it loads into a main openSUSE screen, I choose the "OpenSUSE 11.2" and it starts loading. Then it shows the progress abr under the gecko guy and it starts to load, that moves to a few diff. places on the screen and then it goes black. Any ideas?
View 7 Replies
View Related
Apr 26, 2010
Poston my phone, so forgive the formatting. i just ran the ug to 10.04 from karmic and it appeared to run fine (no errors.) system rebooted and i get a "general error mounting filesystems" and then dumped to maintenance mode. root and swap mount successfully, but root is read only. is there any way to fix this short of a reload. i don't have a second pc very handy at the moment.
View 2 Replies
View Related
Jul 5, 2010
Most of the time instead of a pretty graphical splash I'm getting a small low res text version of the boot screen squeezed into the top left hand corner of my display on my laptop with Intel GMA4500 graphics.
Originally I was getting a blank screen with the Plymouth splash only appearing a couple of seconds before log-in. Adding FRAMEBUFFER=y to /etc/initramfs-tools/conf.d/splash got rid of the blank screen but at the expense of the ugly boot screen mentioned above. To confuse matters, now and again (roughly 1 boot out of 10) I am getting a perfect graphical boot. I've tried reinstalling Plymouth and using different boot themes but to no avail.
View 1 Replies
View Related
Jan 31, 2010
I have a laptop that runs openSUSE 11.2, KDE 4.3.*. I've connected an external monitor to this laptop. The problem is my laptop screen is broke and I want Linux to use my external monitor as the master output. When ever I boot it's always the laptop screen that's taken as the master and my external monitor always have the resolution of the laptop. What I want to do is disable the laptop screen and change the resolution of my external monitor when the computer boots. The following commands seem to do what I want
[code]...
View 6 Replies
View Related
