Ubuntu Installation :: New Install, Unresponsive On Normal Boot, Ok In Failsafe?
Nov 26, 2010
Last week I successfully installed Ubuntu/Gnome onto a 3 year old Toshiba Vista laptop which worked mostly brilliantly. Today I am trying to install it onto a 4 year old Toshiba XP laptop, but am having problems.
Laptop specs: Intel 1.50GHz 488MB RAM 60GB HDD, partitioned by Ubuntu on install into 30GB/30GB, both partitions over 75% free space The laptop, though old, still functions in XP, and the main reason we're switching it to Linux is that it has issues managing wireless, plus it's fun to do so - learning experience and all. The other laptop has better specs - multiply everything by 2 but Windows was much less reliable as, after all, it is Vista, and switching to Linux there was a necessity.
The Ubuntu is 10.10 and it's the same live cd I used to install it onto the other laptop. It's installed alongside Windows XP and the install proceeded without issue. However when booting in normal mode it becomes unresponsive very quickly - sometimes as soon as the five pips on the loading screen become orange, the last time it lasted a whole 2 minutes before becoming unresponsive.
In failsafe graphics boot it runs without issue. The update manager tells me it's up to date, and I have installed Wine through SPM while typing this. It's behaving as I'd expect it to, with tiny lags on scrolling sometimes (perhaps related to being in failsafe graphics).
Is there some setting (graphics?) I should change to allow it to cope in normal mode? I'm aware 488MB RAM is slightly under the recommended amount, but it evidently can cope in failsafe so would appear to be enough to function?
I've installed on my workstation the opensuse 11.2! After the reboot when I enter the username/password, nothing occurs... On the other hand, it's running well with the failsave, why??
In summary, after updating from 11.2 through 11.3 to 11.4, normal boot works fine, failsafe mode hangs with two fatal errors - "Module atiixp not found" and "Module ide-pci-generic not found". i would like to fix this a) so I have a recovery position b) so I learn a little more. As 11.2 has gone out of support I decided to embark on the upgrades to 11.3 then 11.4 using the zypper method described on this site. I think failsafe boot worked ok with the original 11.2 install, but I never had to use it in anger, so I can't be 100% sure. I did not test failsafe in 11.3, just checked that the typical cd set of applications seemed ok before proceeding with the upgrade to 11.4.
I have an AMD processor, chip set and an ATI 3800 series graphics card, so I added the ATI repositories for 11.3 and 11.4 as i worked through the upgrades. At 11.4 there were some graphics glitches during normal and failsafe boot which were successfully fixed by adding "nomodeset" to both boot options. Normal boot works fine but failsafe boot hangs with the error messages above. Searching for failsafe boot errors is unhelpful since, in all cases I have checked, normal boot fails too. I did try removing "Xfailsafe" from the failsafe options which produced no change.
I am guessing that, in failsafe mode, the ATI drivers are not loaded into the kernel and the idea is to default to some safer drivers which, in my case, are not present for some reason. However, there seems to be little information on the origin or purposes of atiixp so I don't know how to go about fixing this. I have not really researched the generic pci driver issue, but I am guessing that this is a fall back when the expected atiixp is missing.
I am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3 Kernel-pae 2.6.38.2-4.1 from Kernel Stable. GRUB 0.97-174.1 from openSUSE 11.4 Upstart 0.6.5-33.1 xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
I have 11.2 installed on my laptop but have a bit of an issue. When I boot it normally, it will not use my full screen, instead it only uses about a 5"x5" box in the center and displays there, but when i boot into failsafe, it uses the full screen.
I just installed OpenSUSE 11.4 on a completely blank machine, empty disks, etc. using a Network Install. The install appeared to run OK, but when it rebooted to do the configuration, it hung. I tried a manual reboot a couple of times, then booted in FailSafe mode - came up OK and ran through the auto-config. Now, it still boots up ok in FailSafe, but in normal mode I get the wallpaper on the screen, but it hangs there.
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
I have Ubuntu 10.04 installed on my desktop on it's own hard drive. The other drive has XP. Grub is on the Ubuntu drive. Everything works fine from the Grub menu. but I have lost the ability to boot from the XP drive. This would be a problem if the Ubuntu drive failed or if I wished to remove it. I would like to repair this, but my immediate problem is with a new install on my laptop:
We are going away for 2 months and I want to be able to continue to learn Ubuntu while away. I want to install it on a new external USB drive on my Win 7 based Toshiba Satellite (ADATA Superior SH93). I did a trial run up to where I have to choose the drive to install to. But based on my experience with my Desktop, I stopped there. I can't afford to have the Win 7 boot disabled.
My question: How do I install 10.10 (or 10.04) to a laptop USB drive without affecting the ability to boot from Windows when the usb drive is removed?
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
I installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
Just a little disappointed. I downloaded the 11.4 Gnome by about midnight, checked the CD for integrity,and started the Live CD, and it worked quite well. Installed it, but troubles started. OpenSuse 11.4 won't boot up in the normal mode, but would boot up in the safe mode only. I am now writing from the safe mode, but would like to boot up normally. It get stuck after the first verbose page. And not a move from there. The laptop is Lenovo T400, Core2Duo with 4GB RAM, screen 1440x900. No problem with any other distros up to now.
I have been running 11.4 now for quite a while. I installed maintenance to it trough Yast's Online update and now can't boot except through the failsafe mode of GRUB. How can I pinpoint where the failure is?
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code: ~> fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Mobility Radeon HD 4300 Series OpenGL version string: 3.3.10151 Compatibility Profile Context Shows fglrx works OK, as well as overall performance is pretty good.
I've done Code: aticonfig --initial radeon drivers is also blacklisted but running (if it means something) Code: # depmod -a; lsmod | grep radeon radeon 868858 0 ttm 64561 1 radeon drm_kms_helper 32944 1 radeon drm 221516 3 radeon,ttm,drm_kms_helper i2c_algo_bit 6728 1 radeon
Edit: I have a Sony Vaio FJ170 laptop with Phoenix BIOS version R0060X6 & a broken DVD Drive. The BIOS doesn't support booting from USB (it does have 'External Drive Boot' option, but my USB stick doesn't get listed under boot devices in BIOS when connected to the laptop).
A few days ago I upgraded to Windows7, then installed Lucid through WUBI. With the help of another thread of mine (here), I changed the default boot option & timeout of Windows to zero to directly boot into Ubuntu. So far it was good. But recently I tried to get back to Windows for some reason but could not succeed as the F8 key no longer brings up the Window's Advance Boot Menu.
Is there another way to restore the dual boot menu timeout to get back to the Windows installation. Or even better, is there some way to make a fresh install of Windows & Ubuntu side-by-side without DVD drive. I am only 14 and absolutely new to Linux. The network booting methods given on the Internet were too complex for me to understand. I like Ubuntu but also need Windows for programming C++ & Photoshop CS4.
machine boots straight to Windows, Grub2 does not display the normal boot menu choices. Therefore, not able to boot into Ubuntu 9.10.Perhaps someone could look at this Results.txt file and shed some light on what went wrong.This machine was working fine for a long time, then all of a sudden, it starting booting straight to Windows.
last week I did an update and it may or may not be tied to the fact that now I can only login to Failsafe Gnome mode. I'm running Ubuntu 9.10 - Karmic Koala. I've had Ubuntu for a year but I'm not that familiar with it.
When I turn on my desktop and log in to Lucid Lynx, I can only use it with "Failsafe GNOME" turned on. If the Normal GNOME is on instead, it literally freezes every single time, within about 4secs-1 minute of use. is there a way I can boot up in failsafe GNOME without clicking it every time?
just looking to do a normal install but my cd drive is not working so i decided to use a usb. on the ubuntu homepage you can download the usb version except it is the netbook one. I just want the normal version but to install it via a usb. is there a way to just transfer the normal install to a usb install?
I'm attempting to install debian on my old ibook g3. Upon normal boot I get a black screen with a bar (attached image) I boot the kernel with init 1 and I see that I have no xorg.conf, so naturally I input xorg -configure. Attached is the log, as I am under Windows and read it. Let me know what you think and let me know if you need any output from me[URL].. p.s As I'm a new member I can't attach anything yet so I uploaded it to media fire. ibook.zip (includes xorg.log & IMG_20110707_203900.jpg /984.41 KB)
my when i boot my ubuntu 8.10 i get only xterm failsafe ,however failsafe Gnome does open , i have tried several solutions from the web such as deleting .profile file and some other solutions but none works.here's my .xsession-errors file
Code: /etc/gdm/Xsessin: beginning session setup... /etc/gdm/Xsession: Executing default failed ,will try to run x-terminal-emulator
This started a few days ago and I checked back through recently installed packages and nothing looks related. If I boot into ubuntu normally, plymouth looks a mess, but then things boot fine but while the mouse is showing and ubuntu goes about with connecting to networks and so on, but it doesn't register the and input from the mouse or keyboard. It will sleep if you press the power button, but its no more responsive after waking up.
If I boot into recovery mode, and use the failsafe graphics option then everything runs fine. Apart from 3D graphics being pretty slow, which I can kind of understand. I get the same behaviour on all of the last three kernels. I'm running the latest maverick on an HP 6715b. i386 version although the processor is 64 bit compatible. 2Gb RAM.
When I boot from the CD I don't get the normal choices to install. The only 2 choices I get are; "Try Ubuntu without any change to your computer" and "Live-Install" I click on Live-install, and I get a boot loader box that has live-install in it and a OK click box i click ok and nothing happens.
I downloaded xubuntu alternate cd and it boots to menu and language selection comes up, but keyboard is dead or something, can't press anything except power button. I tried regular ubuntu CD before and that didn't even reach the boot menu. Using a laptop.
My new laptop (ASUS N71Jv) refuses to install Ubuntu 9.10 - it just produces a black screen. I finally managed to get it on there somehow by installing it in safe graphics mode, so now I have to stare at 1024x768. NVIDIA has a new driver (195.36.0 available that may support my graphics card. When I try to install the executable nVidia driver from a terminal, it rightfully complains that X server is still active. Ctrl-alt-f1 or sudo /etc/init.d/gdm stop produce a black screen and a frozen cursor, /sbin/init 3 does nothing.
So what I want to do is simply install the nvidia driver while not being in gnome.
I suspect that my xorg.conf file does not allow anything but 1024x768 (safe graphics mode). It's very frustrating. Any ideas how I can install the driver while being in simple failsafe command line mode or something?
I just installed 11.3 RC1, but I can only run in failsafe mode. Installation went fine and I'm not having any problems except that when my computer gets ready to launch my login screen it just display garbled graphics. I have tried multiple resolutions and the x11failsafe option, all with a no-go. I did see this error message pop up at the time of garbled graphics on one login: [GPU LOCKUP, switching to software fbcom]
new bought cheap PC, with pleasure installed 11.3 and then I tried to install Ubuntu 10.04... on grub startmenu see I now only SuSE Failsafe. I want my trusted SuSE ro seen, can not find an handy solution on forums.
I've installed my the ATI drivers as per this link: SDB:ATI drivers - openSUSEHowever when trying to reboot on normal mode the OS opens only tty1 (terminal 1?), you know, the one with green theme background. Fortunately I was able to reboot and log with failsafe. Any ideas why this is happening and how I can fix it?
