OpenSUSE Hardware :: TV Card Setup - Get "No Tuner Is Available For The Selected Card"?

Jun 27, 2010

I got a vaio vgn-ar21s laptop that under yast reports to have a tv card: saa7131/saa7133/saa7135 Video Broadcast Decoder

However if I try to choose a tuner (bottom on the right bottom of the yast window for Manual TV card selection, I get "No tuner is available for the selected card".Can this be set up somehow under opensuse 11.2 ? I am running kernel 2.6.31.12-0.2-desktop x86_64

The card works under windows (I can see most digital tv channels [I am in the UK]), but I would prefer to use it under opensuse, of course.

View 2 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Setup Tv Tuner Card With Vlc?

Sep 1, 2011

I have a sabrent tv tuner card (tv-pcirc). I want to use it in vlc but don't know how to change from the composite source to the tuner source and from there don't know how to change channels (is there a program that generates channels.conf for analog channels?) It would also like to know how to record a certain channel for a certain period via the telnet interface. Another thing I would like to know is how to set up the remote with it, because the audio is very soft and I would like to raise the voume.

My card is using card=42 tuner=43.

View 3 Replies View Related

OpenSUSE Hardware :: Can't Use Both Webcam And TV Tuner Card

Mar 11, 2010

If my webcam is plugged in when I start up my computer, it ends up being the only thing I can use -- I can't switch off of it in tvtime. If I leave it unplugged and restart my computer, I can then use my TV tuner card.

View 1 Replies View Related

OpenSUSE Hardware :: Recommendation For HDMI TV Tuner Card?

May 31, 2011

I'm looking for an HDMI-capable TV Tuner card (that preferably works with linux).

View 9 Replies View Related

OpenSUSE Multimedia :: Installing The HVR-950Q TV Tuner Card?

Mar 13, 2010

Has anyone had any success with installing the HVR-950Q TV Tuner card? I am trying it after giving up on the hvr-1500c (15 months trying!).

View 9 Replies View Related

OpenSUSE Install :: Graphics Card Driver / Everything Is Greyed Out (nothing To Be Selected)?

Jun 18, 2009

I recently installed SuSE 11.1 (64 bit) on my system

AMD Phenom II 940 3.0 Ghz;Biostar TA790GX 128M Motherboard with ATI Radeon HD 3300 Graphics card built in;
4 Gb (2*2 sticks) DDR2 800 MHz RAM

The installation went smoothly, But on first restart and login (and subsequent ones too!) I get a light purple screen with a skyblue box at top left corner, with xconsole written on it. when I Left click anywhere on the screen, I get a popdown with a number of options, of which only XTerm (bash shell) and exit (logout) options work. Now I know the HD 3300 graphics card drivers are not built into the SuSE 11.1 distribution, and I have already downloaded them (Linux ones)from ATI website. I login as Superuser, and type init 3 to go to a very basic screen,login as user, change to superuser again and then run the following file i downloaded from ATI:

sh ati-driver-installer-9-4-x86.x86_64.run

The result/output at the command prompt:

Created directory fglrx-install.ubanI5
Verifying archive Integrity... All good.
Uncompressing ATI proprietary linux driver-8.602...
.....(lot of dots)...
ati-driver-installer-9-4-x86.x86_64.run: line 295: ./ati-installer.sh: Permission denied Removing temporary directory: fglrx_install.ubanI5

Once again, i tried everything in superuser login.

Also I tried making changes via sax2 command, it doesnt seem to work. A window opens where I see that my graphics card has been detected but thats about it. nothing else in that option, everything is greyed out (nothing to be selected)

View 6 Replies View Related

Ubuntu :: Setup A Lan Connection Using Wireless Pci Card On Entire System D-link DWA-510 Card?

Mar 31, 2011

How can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .

View 5 Replies View Related

Ubuntu Multimedia :: TV Tuner Card For PC ?

Apr 1, 2011

I haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.

View 1 Replies View Related

Hardware :: Tv Tuner Card Recommendation?

Dec 13, 2008

I am needing a tv tuner card that is compatible with linux. My tv went out so i need to be able to hook up my directv receiver to the card.

View 10 Replies View Related

Ubuntu :: Mixing Up TV-Tuner And Sound Card?

Nov 17, 2010

A while ago I reinstalled Ubuntu on my PC when I felt that Windows was about to give up. I'm glad I did. A lot of the applications I had on my Mac had equivalents on Linux, I was delighted and I haven't been needing Windows at all.

Up until recently everything was working fine, but now I think Linux is mixing up my Sound Card with my TV Tuner. When I call someone using Skype, it ends up airing white noise, however, if I've watched TV prior to that, it ends up airing the sound from whatever channel I was watching last. If I turn on the video calling function (despite the fact that I haven't got any webcam plugged in) it ends up airing video from that same channel.

It just started doing this randomly, and as I did some experiments, I discovered that it does this with all audio-input applications. (Sound Recorder etc,)

So I installed Pulseaudio device manager, and I discovered that my soundcard isn't listed under output devices.

View 2 Replies View Related

Ubuntu Installation :: Set Up A Tv Tuner Card And Ruined OS?

Nov 19, 2010

A few nights ago, I was trying to set up a tv tuner card and I somehow ruined my OS. When I log into Ubuntu, all I get is errors and a blank screen. Since it was an older version, I decided to upgrade to the latest version, 10.10. So I figure that I get a live cd, transfer all my wanted files to an external drive, then install the new OS. I got the live cd and when I boot it, I get some picture at the bottom of my screen with some stick figure and what looks like a piece of film, then my monitor resets and says "Out of range" What can I do to fix this problem? I am currently on a Knoppix 2.6 live cd.

View 4 Replies View Related

Ubuntu Multimedia :: Can't Change Tv Card Tuner?

Feb 20, 2011

I have 2 tv cards that I have successfully configured to work in linux.But this 3rd one I bought recently seems to have a problem. The card is not autodetcted (that's really not the problem) but when I try to load saa7134 with:sudo modprobe saa7134 card=xx tuner=xx, it loads whatever card I indicate but the tuner never changes. This is part of the output of dmesg:

Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[code]....

View 3 Replies View Related

Ubuntu :: Want To Get TV Tuner (Internal Or External) Card

Feb 22, 2011

Way back in the day when I was running Windows I used a Compro Tv Tuner Card which had nice, easy to use drivers for XP. Now that I'm using Ubuntu, I wouldn't mind getting another Card myself (old one died on me) and was wondering what brand was the most linux friendly so to speak?

View 3 Replies View Related

Ubuntu Multimedia :: TV Tuner Card No Audio?

Jun 2, 2011

I have a pinnacle 800i that i just setup and video to work which was a pain but now i cant get audio to work.

View 3 Replies View Related

Software :: F13 - TV Tuner Card Drivers / Modules?

Jul 15, 2010

I am using Fedora 13, kernel 2.6.33.3-85. I have a TV tuner card and lspci shows this:
01:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
Which software should I use to view TV on my PC? Also, how should I check that the drivers/modules for my TV tuner has been loaded or not ?

View 5 Replies View Related

Fedora Hardware :: Connect Desktop To A Tv Tuner Card?

May 19, 2011

Is there anyway I can connect my desktop to a satellite tv decoder and watch the stations from my desktop? I only know tbs 6981 dual tuner card.

View 1 Replies View Related

Ubuntu Installation :: Install Intex TV Tuner Card?

Jan 31, 2010

How do i install a intex TV tuner card
I am very new to ubuntu and only know to use a little of it.
I have a intex tv tuner card with FM.
how do i add this as my hardware
i wa earlier using windows XP and i also have drivers for XP and inter video Win DVR application for viewing TV on XP.

But on ubuntu how do i see TV and how do i install the card.

View 9 Replies View Related

Ubuntu Multimedia :: How To Install Intex Tv Tuner Card

Feb 5, 2010

How do i install intex tv tuner card (PCI ver 2.1) on ubuntu 9.01 I have installed myth tv my problem is which card do i select i selected Analog card and MJPG as well but when i go to scan for channels says FAILED TO OPEN CARD.

View 1 Replies View Related

Ubuntu Multimedia :: How To Configure INTEX TV Tuner Card

Dec 24, 2010

I have INTEX TV tuner card. i'm trying to configure in ubuntu for tvtime. The card has the saa7130 or saa7134 philipse chipset.

lspci | grep -i saa713

output:

Code:

00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

after the installation, the card was detected and /dev/video0 was created but dmesg indicated that the card is not among the ones listed as supported and since card did not have EEPROM, the card was not up and running right away.i have edited /etc/modprobe.d/tvcard.conf and added options saa7134 card=3 tuner=14

Code:

$sudo nano /etc/modprobe.d/tvcard.conf

added:

Code:

options saa7134 card=3 tuner=14

Then CTRL+X to exit

still it did not work. tvtime would always say no signal and tvtime-scanner never picked up any channels. then i followed instruction given by rsramkee [URL]. edited saa7134-cards.c and deployed new kernel linux-2.6.36.2 with changes.i rebooted machine to windows selected one channel in tv tuner software of windows, again rebooted machine to ubuntu (i have dual boot windows XP and ubuntu 2.6.35.23). tvtime able display video of channel that is selected in windows OS (No sound), but not be able to tune any other stations.In mplayer able display video of channel that is selected in windows OS with sound.

command:

Code:

mplayer tv:// -tv driver=v4l2:chanlist=us-cable:alsa:adevice=hw.0,1:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:norm=PAL

i followed instruction given by http://linuxtv.org/wiki/index.php/Saa7134-alsa to set up sound. loading the loopback module with the command:

$ pactl load-module module-loopback

Now tvtime able display video of channel that is selected in windows OS with sound, but not be able to tune any other stations. Not be able to tune any stations.dmesg output:

Code:

[ 1320.568603] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 1320.568697] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffff800
[ 1320.568737] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 [card=2,insmod option]

[code]...

i'm not be able to tune any stations using tvtime and xawtv. if channel is not selected in windows OS for more then 1 hour then tvtime displays message no signal, same message in tvtime-scaner (No sound).

View 1 Replies View Related

Ubuntu Multimedia :: TV Tuner Card - Unable To Get Video

Mar 29, 2011

I have a Phillips SAA7130 TV Tunner card and seems to have installed correctly. I have Xaw TV program on Ubuntu 10.10. I am unable to get the Video. I tried 3 players and in none I am able to see the video. The source in all programs says 'Default' and am unable to choose the card as source. I am also ok to allow remote login to check.

View 7 Replies View Related

General :: Configuring AverTV Super 009 TV Tuner Card - 14

Mar 27, 2011

I have a TV Tuner Card (AverTV Super 009 from AverMedia). I am not able to work with it. My dmesg output is here. [URL]

It says my card number is 180 and tuner 1-42. I have tried all the 42 numbers in the tuner option in the modprobe command (modprobe saa7134 card=180 tuner=1 to modprobe saa7134 card=180 tuner=42). But result is not good. The file CARDLIST.saa7134 in kernel.org displays my device [URL]?

[Code].....

View 1 Replies View Related

Software :: Kaffeine Hangs After Installing 2nd Tuner Card?

Feb 10, 2010

Ever since installing a 2nd tuner card Kaffeine has become unstable and now it won't run at all. It hangs a few seconds after starting up. If I run it from the command line I get the following (see below).

I'm runing Mandriva 2008.0 Kde 3.5.7, Kaffeine 0.8.5.
------------------error:
$ kaffeine
0
kaffeine: Found DVB device.
/dev/dvb/adapter0/frontend0 : opened ( Conexant CX22702 DVB-T )
/dev/dvb/0/frontend1 : : No such file or directory

[Code].....

View 1 Replies View Related

Ubuntu Multimedia :: Configure Generic Remote That Came With A TV Tuner Card

Jan 18, 2010

I've been trying to configure this generic remote that came with a TV tuner card (saa7134) a while ago but I haven't been able to do so. The thing is that the remote works, in fact some buttons are recognized properly... but some are not. I'm not using lirc!, from I have been reading there is support for generic remotes in the 2.6.31 kernel, besides, i can't configure lirc, it doesn't let me load the kernel modules to start up the daemon for the ir. is there a config file for the button mapping of the native remote support in kernel 2.6.31?. Been searching it but couldn't find it.

View 5 Replies View Related

Ubuntu Multimedia :: Tv Tuner Card Works Fine In Windows7 But Not In It

May 18, 2010

Gateway desktop running Ubuntu LL 10.04(64 bit) with Asus/ViXS Combo-210E NTSC/ATSC TV Tuner card: link to card... [URL] Ubuntu lists the card when I do lshw in a terminal but it shows as 'unclaimed'. Is that important? Also what software is neccessary to watch tv? The card works fine in Windows7

View 6 Replies View Related

Ubuntu Multimedia :: Tv Tuner Card: (Vivanco PCI EASY BG / DK) Not Working

Jul 27, 2010

I have an almost noname tv tuner card: Vivanco PCI EASY BG/DK. Lspci says it is Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01). Dmesg detected it as a LifeView FlyVIDEO3000. I tried to configure it making the file at /etc/modprobe.d with the options card=2 tuner=5 (I found that also in dmesg). Still TvTime can't find any channels. I also tried using xawtv and scantv, but only managed to find two channels using ntsc somehow, but I have PAL BG/DK. (the card itself works on Windows, but it took me a while to configure the channels properly)

View 4 Replies View Related

Ubuntu Multimedia :: WinTV Card Fails To Initialize Tuner

Sep 11, 2010

I'm running 10.04 64-bit with all stable and pre-release upgrades enabled in a Dell 4-core Inspiron with 8 GB of memory. I just bought a Hauppage WinTV-HVR 1600 and it's detected in the boot process and all firmware is loaded, but then it goes bonkers and spews

[ 24.421795] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
[ 24.612289] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 24.632510] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)

[code]....

over and over again. All the info on the Hauppage site and LinuxTV is very obsolete. MythTV initializes, but can't find any channels on either the analog or digital streams.

View 7 Replies View Related

Ubuntu Multimedia :: Tv Tuner Card Not Picking Up Digital Channels?

May 26, 2011

I have a tv tuner card thats a couple years old, well since they are phasing out the old analog cable channels with digital ones, my card is not picking them up anymore. Is there any way to get the digital ones without buying a new card?

View 2 Replies View Related

Software :: TV Tuner Card Connected To CCTV Camera - Segfaults?

Dec 4, 2010

I have a tv tuner card connected to a cctv camera for streaming, all works good in tvtime, cheese used to work but then I changed the resolution to a lower one and now it segfaults, purged reinstalled same issue, also I tried with mplayer, mencoder, mythtv (coludn't find any signal on the input) and camorama.
Code:
mplayer tv:// -tv driver=v4l2:input=1:channel=1:width=768:height=768:device=/dev/video0

And it displays lines through everything but I can see the messed up image, I believe this is due to the current input format being YVU420, I was able in another program to verify this by changing the input codec to yvuv i think it was, how do I change the in mplayer, mencoder, camorama has this bug too, how to change this setting ut codec in mplayer and mencoder, also canorama has this issue, but I can actually see everything, b/w and with lines through it. I am just trying to record video to AVI.

View 3 Replies View Related

OpenSUSE Hardware :: Setup For PCI LPT Card With Two Ports?

Oct 20, 2009

I use libk8000 with Velleman K8000 IO-board. It works fine with a machine which have port integrated on the motherboard. But my new machine does not have LPT on the motherboard. Therefore I bought a PCI LPT-card which have two LPT ports.

It is a board from NetMos Technology. lspci -vvvv gives following.
05:02.0 Communication controller: NetMos Technology PCI 9815 Multi-I/O Controller (rev 01)
Subsystem: LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e480 [size=8]
Region 1: I/O ports at e400 [size=8]
Region 2: I/O ports at e080 [size=8]
Region 3: I/O ports at e000 [size=8]
Region 4: I/O ports at dc00 [size=8]
Region 5: I/O ports at d880 [size=16]
Kernel driver in use: parport_pc
Kernel modules: parport_pc

In the libk8000 the data, status and control ports are statically defined. Are the I/O addresses and IRQ-line dynamically defined each time computer is restarted. Might they change in each boot or only when hardware is changed? If so any links to code that dynamically acquires these values would be good. Kernel supports this card because I can connect printer to it and it works. Where in the parport-subsystem is the code which acquires the IO and IRQ?

If the IO and IRQ don't change in each boot then what might be the data, control and status ports for LPT1 and LPT2 on the above lspci-listing? I have tried several combinations without result. On the motherboard LPT the ports are in increasing order with 1 byte. On the lspci-listing above there are 8 byte regions with each IO-address. The last one have 16-byte area - why ?

View 5 Replies View Related

Fedora Hardware :: Configuring AverTV Super 009 TV Tuner Card From Avermedia?

Mar 24, 2011

I have installed a new TV Tuner Card. AverTV Super 009 TV Tuner Card from Avermedia. I am using Fedora 14. How can I make the above card work for me? (I am not proficient in Linux.)

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved