OpenSUSE :: Install Novell Client On 11.3
Nov 9, 2010Is it possible to get the novell Client work on openSUSE 11.3(KDE)?
View 1 Replies
ADVERTISEMENT
OpenSUSE :: Installing Novell Client On 11.2
Nov 14, 2009When trying to install Novell client (novell-client-2.0-sp2-sle11-i586.iso) on my 11.2 box, I get the following error: "Problem: nothing provides libbfd-2.19.so needed by novell-xtier-base-3.1.6-12.i586". The libbfd library is provided by binutils. I have binutils-2.19.51-10.26.4.i586 installed, and it provides /usr/lib/libbfd-2.19.51.20090527-10.26.4.so. I made symlinks (/lib/libbfd-2.19.so and /usr/lib/libbfd-2.19.so
View 9 Replies View RelatedOpenSUSE Network :: Novell Iprint Client On OpenSUSE Fails
May 10, 2011Trying to install the Novell iprint client but got the following error message:
My system specifications are as follows:
SUSE / Novell :: Install OpenSuse 11 64bits On A Box Already Has 32bits OpenSuse Installed?
Nov 23, 2010I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View RelatedSUSE / Novell :: OpenSUSE 11.2 Won't Install Fully?
Mar 15, 2010So I have tried to install from LiveCD and from a LiveUSB stick. Installation goes fine till I get to CUPS daemon. Then I get the wait 30 seconds for CUPS to activate, that never works. Then it pops up with a wait one minute for CUPS to become available. Then it finishes the installation and restarts the system and I get previous installation has failed would you like to retry? It does this over and over again till I get an error with my user name and the mouse and keyboard quit working. I have tried in Failsafe mode, No ACPI, etc. and nothing seems to work. I don't know if it matters but I have an Asus mobo M4A785-M and an AMD Athlon II x3 440 chip. I am just ready to switch to Ubuntu
View 14 Replies View RelatedSUSE / Novell :: Error While Creating Client Module Sw_single?
May 14, 2010Yast2 appears to be broken. Whenever I open the YaST control center and attempt to install new software, I am greeted with this error message. When I click on the "Install New Software" shortcut from the start menu, nothing happens.
I researched this error message and found that apparently I can install software via Zypper, but all the commands to enter in the terminal result in a message about an unrecognized command.
OpenSUSE 11.2 64-bit
SUSE / Novell :: Cannot Install OpenSuSE 11.3 On My Toshiba Satellite Pro?
Sep 21, 2010I have a Toshiba Satellite Pro laptop with the following specifications:Proccesor: Intel Core i3 350M / 2.26 GHzRAM: 4GB DDR3Hard Disk: 320GB SATA 5400rpmArchitecture: x86_64The computer has already Windows 7 installed on the C drive whereas there's a D hidden drive with a copy of the recovery image.I'm having trouble to install openSuSE 11.3 as follows:I boot the system with the DVD in its drive. After the welcome screen the process stops
using the typical GUI interface and runs a less graphical one. It is at this point where a
window pops up with a request:"Make sure that CD number 1 is in your drive"I press OK but the window keeps popping up. Frustrated I hit Back and a red window comes up with the message:"No repository found."I cannot go any further than this point
SUSE / Novell :: Install Cuda Drives For Opensuse 11.2 64 Bit?
Mar 23, 2010Can anyone provide a guide on how to install cuda drives for opensuse 11.2 64 bit?
View 1 Replies View RelatedSUSE / Novell :: OpenSuse 11.2: Use Serial Mouse During Install ?
Dec 23, 2009I'm installing OpenSuse 11.2 on some systems. Unfortunately the only mouse available is a serial mouse. Hence the installer doesn't recognize the mouse.And it is somewhat cumbersome using the TAB and ARROW keys to navigate the graphical installation.Does anyone know of a boot option I could use to get OpenSuse's installer to recognize a serial mouse ?
View 5 Replies View RelatedSUSE / Novell :: Cannot Register Service - RPC - Authentication Error - Why Client Credential Too Weak
Feb 8, 2010I have a program to start called "pace_old".
In the command line I type it's name and get this:
What should I do ?
Distro is SuSe 11.1. Btw: I do not get this message on Suse 9.0. Pace_old runs properly there.
OpenSUSE Install :: Error: Failed To Download ./repo/repoindex.xml From Https://nu.novell.com/?cookies=0&cre
Jul 4, 2010For some reason I was trialing a SUSE 11.1 SP1 version for a while and somehow I have NO clue it attempted to change itself to a OpenSUSE 11.1 System. I have no clue what I did, please don't ask Now though I have been successful in turning into an OpenSUSE 11.2 system by changing the repositories to OpenSUSE 11.2, doing a "zypper refresh", "Zypper in Zypper", "Zypper dup -d", "Zypper dup". I also did a repair and refreshed the base packages with an OpenSUSE 11.2 DVD and that seemed to help also. The only thing it seems I can get right is that yast/yast2 give me this error: Download failed: Failed to download ./repo/repoindex.xml from https://nu.novell.com/?cookies=0&cre...NCCcredentials
[Code]...
OpenSUSE :: How To Install Amanda Client 3.2
Oct 23, 2010I'm trying to install the client but getting failed dependencies:
libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
where to find those files and how to install them? I'm running OpenSuSE 11.1
OpenSUSE Install :: Can't Login After Install Novel Client For 2.0-SP2
Apr 17, 2011I install Novell-Client-2.0-sp2-sle11-i586.iso for Linux on My IBM T23 with SUSE 11.2. I test it with Open Server 6.5 SP8 and SUSE Enterprise 11 both have Novell eDirectory 8.8.Know I can't login I get a error message "Module in unknown" can't you help?
View 1 Replies View RelatedSUSE / Novell :: "Error 22: No Such Partition" From GRUB After OpenSUSE 11.3 Install
Aug 1, 2010I tried to install openSUSE 11.3 from the Gnome live CD. I had four partitions set already for /boot, /, /home (ext4 all) and swap from a previous failed Linux Mint installation. I installed into them, and formatted them. The /boot partition is primary and pretty well into the disk. The other partitions are logical and at the end of an extended partition which has several partitions before them. There's also an inactive Windows primary partition at the start, and a second disk with a Windows installation and a lot of logical partitions.
After install, it looks like booting into grub works fine, and I get "Error 22: No Such Partition". I then get to the GRUB menu. If I choose openSUSE from there I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
Booting from the live CD it looks like /boot, / and /home contain data, so they must be formatted fine.
OpenSUSE Install :: DHCP4 Client Not Running?
Dec 2, 2009My OpenSUSE 11.1 boot sequence pauses for 20 seconds (you can see the countdown in the log) when trying to start the DHCP4 client, and then fails to start it:
Code:
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
[Code]...
OpenSUSE Install :: Nfs Client Hangs System?
Aug 25, 2010nfs client hangs system for 3 to 5 minutes during boot, Does any one have any clues?
The last message before the hang is 'Starting NFS client services: sm-notify idmapd'.
My fstab looks like this:/dev/system/swap swap swap defaults 0 0
/dev/system2/swap swap swap defaults 0 0
/dev/system2/root / ext4 acl,user_xattr 1 1
[Code]....
OpenSUSE Install :: LTSP Client Doesn't Get USB Mounted At All?
Feb 6, 2011how to get USB disks/sticks to mount on the clients. Is there something with some configfile that needs to be enabled or in the setup of the default image?
Cannot even move files from the USB drive via the servers USB as it is virtual one on a ESXi host.
the school starts on monday (8 hours) and there is about 10GB files that need to put in place before that.
PS. OpenSuse 11.3 all patched with minimum XFCE desktop on the server. easy-ltsp install via 1-click install on the opensuse/kiwi-ltsp page. Server + 20 clients Everything else functions properly but no CD or USB on clients
General :: How To Install Forms And Reports Client In OpenSuSe
Apr 14, 2011How to install Forms and Reports (6i) Client in Linux.
View 1 Replies View RelatedSUSE / Novell :: Zypper Install Gdb - Does Not Install The Latest Version Of GDB
Dec 29, 2010OpenSuse 11.2 This link shows that gdb-7.2-61.1.x86_64.rpm is the latest version of GDB, but when I do: zypper install gdb, the version 6.8.x gets installed! The following result is after forceful refreshment:
Code:
linux-uitj:/home/anisha # zypper repos
# | Alias | Name | Enabled | Refresh
--+-----------------+-----------------------+---------+--------
1 | KDE:KDE3 | KDE:KDE3 | Yes | Yes
2 | X11:lxde | X11:lxde | Yes | Yes
[code].....
OpenSUSE :: Set Up Novell Apparmor?
Feb 19, 2010Set up Novell Apparmor? how to do it.
View 2 Replies View RelatedSUSE / Novell :: Can't Get Rid Of Patch 11.2 Opensuse
Feb 14, 2010I am using kde and can't get rid of a gnome patch. Problem won't go away in updater applet tray or yast online update.
View 2 Replies View RelatedSUSE / Novell :: Get Free Cd's Of OpenSUSE
Nov 21, 2010Where can i request a free openSUSE cd's from online.I could not Download Because my Internet connection speed is very low.
View 1 Replies View RelatedSUSE / Novell :: OpenSuSE 11.3 During The Installation?
Jul 21, 2010I use Linux with a lot of pleasure almost 6 years... after installing Ubuntu 10.04 Itried to install openSuSE on with Ubuntu prepared partitions, 20GB for / and 120 for /home. I have tried 4 times to install SuSE, but I have each time same problem. Suse installer shows instead 20 and 120GB partitions 16 and 104 GB and insallation was failed with message that PC probably was attacked. Before was installed excellent worked OpenSuSE 10.3. I have no idea. It's PC with AMD 3200 64-bit, 1GB DDR, Nvidia7300SE.
View 3 Replies View RelatedSUSE / Novell :: Upgrade Q - Opensuse 11.0 To 11.3?
Dec 17, 2010For the past several years I have grown fond of ver. 11.0...I have installed many programs with that verison. I have checked out the Live ver. of 11.3, and I like it allot but I'm wondering if I can some how check the software available for 11.3 to see if the same program/s are available with ver. 11.3. In other words can I run the Live CD, click on the Yast package installer and look for the same programs I have with ver. 11.0 ?
View 1 Replies View RelatedSUSE / Novell :: How To Install GCC Version 3
Mar 22, 2010I am using open suse 11.0 with gcc 4.3.2. I am compiling a program which requires libg2c. Where can I find libg2c and how to install it?
View 8 Replies View RelatedOpenSUSE Network :: Setup As A Network Boot Server To Install Solaris 10 On A Sun Ultra 10 Client?
May 12, 2011I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedOpenSUSE Network :: Novell IPrint On Version 11.1
Jan 16, 2009With OpenSUSE 10.3 iPrint was working. I was printing to a Novell iPrint-server and had no problems at all. Now i upgrade til OpenSUSE11.1 and now iPrint does not work at all. I downloaded the lates iPrint Client that was released 13.januar 2009 and tried to install. It claims i miss "libglitz.so.1". I searche for this file in Yast and find Glitz-i586 Installed it and now iPrint Client did install witout any errors. Now i try to install an iPrint-printer that have a Linux-driver attached. Firefox crash everytime i try to install this printer. I tried both as normal user and as root but with same result. I know the normal respons is "Novell doesnt support OpenSUSE but only SLED". I dont like SLED because its not near as good as OpenSUSE. SLED does not support any multimedia and i had several unresolveable problems with it. Novell develop Novell Client for OpenSUSE, so why not iPrint Client?
View 4 Replies View RelatedSUSE / Novell :: Allow Root Login Using Kde 4.5.3 On Opensuse 11.3?
Nov 6, 2010How can I allow root logins using kde gui 4.5.3 on opensuse 11.3 ? Currently the gui says "root logons are not allowed" Rpms installed see listing [1]
[1]
# rpm -qa | grep -i kde |sort
NetworkManager-kde4-0.9.svn1184295-5.2.x86_64
NetworkManager-kde4-libs-0.9.svn1184295-5.2.x86_64
NetworkManager-openvpn-kde4-0.9.svn1184295-5.2.x86_64
NetworkManager-pptp-kde4-0.9.svn1184295-5.2.x86_64
[Code].....
SUSE / Novell :: How To Get MAKE Command - OpenSUSE 10.3
Jun 14, 2010I am using openSUSE 10.3 and the pc is DELL Optiplex 780. The network devices is not supported by openSUSE 10.3 but I may have found it's module. But I can't "MAKE INSTALL" it as my installation does not have MAKE command.
I have selected "Install All" during my installation. Linux version is 2.6.22.5-31-default.
What is the package name for the MAKE command? So that I can find it so that I can install it into my openSUSE 10.3?
SUSE / Novell :: OpenSuSe 11.3 Refuses To Shut Down
Sep 7, 2010I have just installed opensuse 11.3 on my box and it refuses to shut down. It shows a tty screen with the message "power down" but wont power off. After searching the web I found no solution until I compared the "halt" scripts of versions 11.3 and 11.2 (they are located in /etc/init.d). Both scripts differ only by a couple of lines that make reference to raid devices. As I am not using any RAID array in my BIOS, I copied my halt script (version 11.2) on top of the version 11.3 halt script and my box started to shut down and power off nicely! At least for me it worked!
View 28 Replies View Related