I have a program to start called "pace_old".
In the command line I type it's name and get this:
What should I do ?
Distro is SuSe 11.1. Btw: I do not get this message on Suse 9.0. Pace_old runs properly there.
I am trying to solve problem with software which needs to have access to network card I suppose. Installation run without any problems but when I am launch software I get such message as normal user:
Cannot register service:
RPC: Authentication error; why = Client credential too weak.
When I launch program as root I get this:
WARNING: localhost appears to have the loopback address 127.0.0.2 as IP address
This may imply that processes on arlin may not be able to connect to non-local processes but program starting with success at least. What I should do to run program as normal user?
Yast2 appears to be broken. Whenever I open the YaST control center and attempt to install new software, I am greeted with this error message. When I click on the "Install New Software" shortcut from the start menu, nothing happens.
I researched this error message and found that apparently I can install software via Zypper, but all the commands to enter in the terminal result in a message about an unrecognized command.
OpenSUSE 11.2 64-bit
I installed HP multifunction inkjet printer.Since then, I'm always noticing the blue HP HPLIP servicestatus icon in the system tray. It appears that I can onlyhide or quit it once it has started.Is there a way not even have it started from the system booting?
View 1 Replies View RelatedI just installed the software for my APC UPS on my SUSE 11.2 machine. After some work I finally got it work except I have to go and start it each time I reboot. It is supposed to load automatically, but somehow mine doesn't. If I go to a command prompt as SU and type "apcupsd start" and then go look at the GUI everything shows up fine.
View 2 Replies View RelatedServer: Fedora 14
Client: Fedora 14
LDAP server: 389-ds
I have set up the 389 server using the default configuration. Adding user and http/pam authentication works fine. The problem I have is the client authentication. On the client machine, using "authconfig-tui" to turn on LDAP authentication it turns on sssd and use 'sss' in etc/nsswitch.conf after 'files'. I couldn't get sss working. In the end, I disabled sssd and manually changed 'sss' to 'ldap' for all configuration files including:
modify /etc/nsswitch.conf
modify /etc/pam.d/password-auth, change all sss to ldap
modify /etc/pam.d/system-auth
change /etc/sysconfig/authconfig
FORCELEGACY=yes
After these, client authentication works. I can log in to the client machine using user/password set on the LDAP server. I thought this is done but everyday the LDAP service stop functioning once or twice. I can't log in to the client machine using LDAP username/password. After restart the dirsrv on ldap server, things back to normal. I can't find any reasons from /var/log/dirsrv/ldap-xxx error file and don't know how to debug the problem.
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies View RelatedI have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies View RelatedI have implimented SugarCRM on a SUSE 10 box . Every thing goes ok but in the SugarCRM ,it's saying :
Quote:
Error: Could not connect to the Sugar Server. check your Proxy Settings value in the System Settings admin panel. Last attempted connection @ 10/11/2010 06:37pm and unable to setup email inside that. But the system is neither have proxy setting and internet runs fine outside SugarCRM. IN RHEL,CentOS all run ok but not in SUSE ?
I am installing SLES on a new server with raid 05, after I went with the setup it copies all the files until It gets to install grub. It gets me an error message installing grub and it wont let me move forward.
[code]...
Have loved using v11.0 of Opensuse for years, lately I have noticed over time 7 of my 11 repo's have stopped/failed...does this means Novell-community has/will stop supporting this version and I should move on to a higher version ??? There hasnt been any change in my linux box for years.
Example: Refresh failed: Error: Could not refresh repository 'openSUSE-11.0-Oss': Valid metadata not found at specified URL(s) History: - File '/content' not found on medium [URL]' Error: Could not refresh repository 'openSUSE-11.0-Non-Oss': Valid metadata not found
It seems to be related to some kind of gcc library missing, but I went into YAST and I've installed the kernel sources, headers, devel, and a bunch of other things I found in various forums. I consistently get an error message about GLIBC_2.11 not found, even if I just do gcc -v. Contents of config.log:
[code]....
I have volume on my SUSE 11.1 But it is very weak compared to my MS OS.
View 1 Replies View RelatedWe have a server for which the root password had been lost, and there were no other user accounts set up. Yesterday evening I attempted to reset the root password by booting from the install CD and using VI to clear the root password in the passwd and shadow files. I then rebooted, and the system has halted with an 'FSCK failed. Please repair manually and reboot' error, with a prompt to 'Enter root password' below. But of course the root password isn't known (I had expected it to blank after editing the passwd and shadow files, but it doesn't work), so I have no way of logging on.
View 6 Replies View RelatedI am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies View RelatedJust an FYI for anyone who may be having this particular problem. A short while back, I was trying to attach a picture to a Twitter post, and dropped my network connection. No big deal...connection came back, and things went on. Next time I launched Choqok, it popped up a message saying "Server Error: This method requires authentication". It was puzzling, and didn't appear to impact my use...until I went to send a direct message, and it would give that error and crash. After quitting Choqok, the file (/tmp/ksocket-user/klauncherXXXXXX.slave-socket file) was still present. Deleting that file manually cleared the error up. I've seen this mentioned in a couple of other forums, but none with a solution posted.
If anyone else has that error, and this method resolves it, please let us know. I'm using openSUSE 11.4, but it should apply to any version/distro of Linux using Choqok.
I have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
I was trying to copy a few files to my phone via bluetooth when the file transfer window popped up with the progress bar stating "Connecting" and an error: the name org.openbox.client was not provided by any .service files..
I am using: openSUSE 11.3
Gnome 2.32, Kernel 2.6.38,
obex-data-server 0.4.5-12.2,
[code]....
I'm a newbie to Linux and need some help in DHCP client configuration.
I'm trying to find a way to set hostname at the start up and get the DHCP client to register itself after it received an IP address.
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View Relatedhow to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedI've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies View RelatedI'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
I tried to install openSUSE 11.3 from the Gnome live CD. I had four partitions set already for /boot, /, /home (ext4 all) and swap from a previous failed Linux Mint installation. I installed into them, and formatted them. The /boot partition is primary and pretty well into the disk. The other partitions are logical and at the end of an extended partition which has several partitions before them. There's also an inactive Windows primary partition at the start, and a second disk with a Windows installation and a lot of logical partitions.
After install, it looks like booting into grub works fine, and I get "Error 22: No Such Partition". I then get to the GRUB menu. If I choose openSUSE from there I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
Booting from the live CD it looks like /boot, / and /home contain data, so they must be formatted fine.