General :: How To Install Forms And Reports Client In OpenSuSe
Apr 14, 2011How to install Forms and Reports (6i) Client in Linux.
View 1 Replies
ADVERTISEMENT
General :: Ubuntu Working On Thin Client Cannot Provide Accurate Disk Space Reports?
Jul 26, 2011We are using thin client systems in our work environment. There is a central ubuntu server and by using thin clients, we are connecting to our homes. The problem is when I try to install an application, it reported me that I had 200 mb of disk space. But when i try to look from console, I see that /home folder has over 250 gb s of disk space. Even when I try to look from baobab, Disk Usage Analyzer in Ubuntu, i see that my home file system is full.
So what's the reason that I am receiving different kinds of disk space report from different sources? Our system admin here told me that some applications foolishly try to see the physical devices on the thin client and got confused as a result. Is this true?
OpenSUSE Install :: 11.3 - Freezing While Booting And Reports Kernel Bug
Feb 5, 2011We have just installed the 11.3 version of opensuse in a Dell Poweredge T610 with 8 Gb in RAM and two (2) Xeon Quadcore proccesors. Well, the first time the Opensuse resets the computer, after the installation (it was fine, w/o any problem) the system goes frezze showing a screen which reports a BUG ERROR in the Kernel code, specifically:
Kernel bug at /usr/package/BUILD/kernel-desktop-2.6.34/kernel/timer.c:643
invalid opcode: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/module/thermal_sys/sections/__ksymtab_strings
CPU 11
...
...
After a "button off" reset the machine boots fine and we could finish the configuration of the applications that we needed. We tested the machine by two days and it didn't show again the problem mentioned, and we believe it was a little bug in the installation, but today, the server halts again in the boot process 3 (three) times before it runs again well.We have repeated this installation in other computers, one in a 32 bit version and other in 64 bits version (like the Dell) and only in the last one has repeated the problem, I mean, no problems in the 32 bit installation. Fortunately, this new server is just a replacement for an old machine, that is running with the 10.3 version. Perhaps, does we continue using the 10.3 instead of the 11.3 meanwhile it is deputed?
OpenSUSE Install :: DF Reports Completely Different Sizes From FDisk
Sep 13, 2011Opensuse Linux (Linux sr-server 2.6.37.6-0.7-default #1 SMP 2011-07-21 02:17:24 +0200 i686 athlon i386 GNU/Linux). I have a very unusual problem where fdisk reports one size BUT df reports a TOTALLY different and unexpected size. Besides doing a full backup, repartition, reformat and restore, is there anything else I can try first??
Here are the outputs: (sda1 and sda2 sizes are completely different from fdisk!!)
df -v -h
Filesystem Size Used Avail Use% Mounted on
rootfs 22G 17G 4.2G 81% /
devtmpfs 369M 152K 368M 1% /dev
tmpfs 375M 648K 374M 1% /dev/shm
/dev/sda2 22G 17G 4.2G 81% /
/dev/sda1 15G 7.8G 6.6G 54% /windows/C
FDISK reports correctly (sda1, sda2, sda3 = 24Gb, 949Gb, 3.1gb) .....
OpenSUSE Install :: Windows 7 Reports Suse Not In Extended Partition?
Dec 29, 2009I have installed Windows 7 Professional (64 bit version), and OpenSuse 11.2 (64 bit) on to a newly built Core i5 machine. I installed Windows first, with 3 partitions. The 100MB partition Windows reserves, a C: drive for the operating system and a D: drive for data. Both of these are NTFS partitions. I then installed OpenSuse into the unallocated section at the end of the new disk drive. The Linux partitioner showed OpenSuse in an extended partition, containing a swap / /home and /tmp partition. Both operating systems now appear to be working fine, but I'm worried about the Windows Disk Manager showing that the OpenSuse partions are primary ones, and are not inside an extended partition. It only shows a small amount of unallocated space at the end of the drive as being in an extended partition.
Should I delete OpenSuse and start again? Perhaps creating an extended partition with Windows before trying to reinstall OpenSuse?If I leave the disk as it is, is it likely to continue to dual boot without something unstable occuring? It may just be a Windows problem which will not be fatal, but I'm worried all my files may get scrambled at a some point in the future.
OpenSUSE Install :: UName -a Reports Wrong Kernel Version After Upgrade
Jan 6, 2011I did apply the updates on 11.1 32bit and upgraded the kernel from 2.6.27.45 to 2.6.27.56.
Now:
Code:
> uname -a
Linux myhost 2.6.27.45-0.1-default #1 SMP 2010-12-01 16:57:58 +0100 i686 i686 i386 GNU/Linux
but:
Code:
> cat /proc/version
Linux version 2.6.27.56-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2010-12-01 16:57:58 +0100
OpenSUSE :: OooBase Crashes When Creating Forms?
Jan 17, 2010I am using OpenSuse 11.2 and have installed Open Office 3.1.1.5 from the STABLE repository. I have connected Open Office Base to a MySql database using JDBC. All tables are visible and accessible. However, as soon as I try to create a form, at the moment I want to connect to the data source (e.g. with the 'finish' button) Base crashes and needs to be restarted. Creation of forms is thus impossible I installed OOo vers 3.1.1.5 because it was happening with 3.1.1.4 as well.
View 3 Replies View RelatedOpenSUSE :: No Navigation In LibreOffice Base Forms
Mar 13, 2011I've just installed Opensue 11.4 (gnome-desktop) on my machine. The problem is that, if I open a database-form with libreoffice base, no navigation-bar appeares. The option "navigation" from the view-menu is not active. The database uses the built-in HSQLDB in single user mode. Navigation via libreoffice-basic is possible and I can see the first record - just it is not possible to navigate manually.
View 4 Replies View RelatedDebian :: Tool For Squid Reports (not SARG) - Generate Less Amount Of Files - Optimal Is To Save Reports To The Database
May 9, 2011I got the following task from my boss. I have to find out if there is some alternative tool for create reports from Squid except SARG. Now, we use SARG, but my boss told to me, that the main problem of SARG is, that SARG generate huge amount files, which cause problems during migration our servers. He told to me the following condition for change of current tool (SARG):
* standard package of Debian
* generate less amount of files, optimal is to save reports to the database
So I would like to ask you if you know about some tool (I can not find some by google)... and the best would be if you told to me some practical experiences.
Software :: Opening Oracle Forms - Install J2SE Plugin Version
Mar 30, 2011On PCLinux0S 2009. I just tried to open Oracle R12 from firefox 3.0.7 and it worked fine. I did get this message:
In order to access this application, you must install the J2SE Plugin version 1.6.0_07 on your client and NPX_PLUGIN_PATH environment variable is set before starting Netscape. To install this plugin, click here to download the oaj2se.exe executable. Once the download is complete, double-click the oaj2se.exe file to install the plugin.
You will be prompted to restart your browser when the installation is complete. But it worked fine. But on Oracle Linux 5 (ironic). I get the same message but the form does not open. I have Firefox 3.0.7 on PClinux 0S and Java TM Plug-in 1.6.0_12-b04. On Oracle Linux 5 I have Firefox 3.6.13. I cannot find Java TM Plug in.
General :: Config Multi Oki Forms Printer Via Lantronix Ps?
Mar 23, 2011I have tried about every combo, but cannot get any test page delivered to the printer. The device/ps setup works fine in our old Sun Unix environment.
View 6 Replies View RelatedGeneral :: Wget Webpage Using Post Method With Multiple Forms
Feb 19, 2011I would like to download a webpage using WGET which needs a form submission (POST method) in order to appear. I can do that with this command.
wget --post-data="computer=hosts&style=list" http://www.example.com
The problem is there is more than one form on the requested page and I dont know how to tell WGET which one should it POST the data to.
OpenSUSE :: How To Install Amanda Client 3.2
Oct 23, 2010I'm trying to install the client but getting failed dependencies:
libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
where to find those files and how to install them? I'm running OpenSuSE 11.1
OpenSUSE :: Install Novell Client On 11.3
Nov 9, 2010Is it possible to get the novell Client work on openSUSE 11.3(KDE)?
View 1 Replies View RelatedOpenSUSE Install :: Can't Login After Install Novel Client For 2.0-SP2
Apr 17, 2011I install Novell-Client-2.0-sp2-sle11-i586.iso for Linux on My IBM T23 with SUSE 11.2. I test it with Open Server 6.5 SP8 and SUSE Enterprise 11 both have Novell eDirectory 8.8.Know I can't login I get a error message "Module in unknown" can't you help?
View 1 Replies View RelatedOpenSUSE Install :: DHCP4 Client Not Running?
Dec 2, 2009My OpenSUSE 11.1 boot sequence pauses for 20 seconds (you can see the countdown in the log) when trying to start the DHCP4 client, and then fails to start it:
Code:
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
[Code]...
OpenSUSE Install :: Nfs Client Hangs System?
Aug 25, 2010nfs client hangs system for 3 to 5 minutes during boot, Does any one have any clues?
The last message before the hang is 'Starting NFS client services: sm-notify idmapd'.
My fstab looks like this:/dev/system/swap swap swap defaults 0 0
/dev/system2/swap swap swap defaults 0 0
/dev/system2/root / ext4 acl,user_xattr 1 1
[Code]....
OpenSUSE Install :: LTSP Client Doesn't Get USB Mounted At All?
Feb 6, 2011how to get USB disks/sticks to mount on the clients. Is there something with some configfile that needs to be enabled or in the setup of the default image?
Cannot even move files from the USB drive via the servers USB as it is virtual one on a ESXi host.
the school starts on monday (8 hours) and there is about 10GB files that need to put in place before that.
PS. OpenSuse 11.3 all patched with minimum XFCE desktop on the server. easy-ltsp install via 1-click install on the opensuse/kiwi-ltsp page. Server + 20 clients Everything else functions properly but no CD or USB on clients
OpenSUSE :: Peazip Will Not Archive - It Reports An Error (127)
Nov 5, 2010File create archive etc etc
OR
R-Click Add
OR
R-Click Convert
All operation result in a seperate window displaying the progress of the compression but with an error.
Error 127, cannot execute requested operation.
Then when the progress bar reaches full it resets and then resets again continuing the same loop with it becoming slower with every repetition. There is no information posted in the report log of the window. Except that the task has started.
I'm trying to simply archive a file and password protect it. This shouldent be such a difficult task.
P7zip also gives me its own set of errors when archiving.
Fedora :: Install Gnome-schedule The System Reports Nothing?
Jun 23, 2011Ive tested this on 2 different machines each running Fedora 15. If I try to install gnome-schedule the system reports nothing to do or that the software is already installed. If I try to remove it the system reports that gnome-schedule is available but not installed. Anyone know how to approach this?
View 2 Replies View RelatedUbuntu :: Tcl,tk,perl-tk Fail To Install But Apt-get Reports Success?
Feb 26, 2010I tried to install perl-tk today, and tried tcl and tk in the process. "apt-get install" is reporting success, but I can't find the commands. I expect them to be in /usr/bin, but they're not there. I've tried "clean" and "update" as well, and even rebooted, to no avail. Synaptic package manager gives the same results. This is happening on two different systems, one running koala and the other intrepid. Here's a snippet of what I've tried:
%heron 35: sudo apt-get purge tk tcl perl-tk
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package tk is not installed, so not removed
[Code]...
OpenSUSE Hardware :: ACPI Reports 78% With Fully Charged Battery?
Dec 28, 2010My ACPI and KDE Battery Monitor both report my battery as being 78% charged, even though I normally use it plugged in and it should be fully charged. I've found a bug report of the same thing in Ubuntu, but it seems to only happen to Sony laptops and I'm using a Lenovo G560. Plus, the bug is pretty old. Does anybody have a clue how to find out if my battery really isn't charging or if it's a software problem?
The bug report is here: [URL]
It seems to occur with laptops with "smart" battery configuration settings in Windows. As I've never had Windows on this computer, that possibility is already shut out.
OpenSUSE Hardware - Pl2303 Serial - USB Adapter Not Working - Minicom Reports Offline
Oct 1, 2010I am using a Prolific pl2303 USB<=>Serial adapter. dmesg reports everything seems ok when I plug it in (see below) but when I open the ttyUSB0 port in minicom, it is always offline and nothing works. Also, minicom reports:
[code]....
If I plug the adapter into a different machine (Windows) everything works fine. The serial port is setup correctly (9600-8-N-1) What can I do to get this working?
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
pl2303 5-2:1.0: pl2303 converter detected
usb 5-2: pl2303 converter now attached to ttyUSB0
usb 5-2: New USB device found, idVendor=067b, idProduct=2303
[Code]....
General :: Install Knock Client On Ubuntu 10.04?
May 27, 2011install knock client on ubuntu 10.04?
View 3 Replies View RelatedGeneral :: Install The Second Life Client In Puppy ?
Nov 15, 2009I am extremely green when it comes to puppy but I would like to know how to install the Second Life client in Puppy. There are two Linux clients: [url] and [url]
I have some 2.14 and 2.17 puppys, and maybe some other versions. Can someone tell me whether either of those clients will run, and then
General :: Install Torrent Client In User Space
Jul 14, 2011I've been looking to get some torrent downloads running on school servers, but I obviously can't install a torrent client because I don't have root (and by extent, can't run anything requiring root privileges). Servers are running various versions of Red Hat (at least the x86_64 ones are, I don't want to recompile if I don't have to). Google has failed me thus far.
View 13 Replies View RelatedGeneral :: Install A DHCPv6 Server And Client With CentOS 5.1?
Nov 21, 2010I have a problem about installing DHCPv6 on CentOS . I have 2 machines,a machine is DHCPv6 server and another is DHCPv6 client,they are in the same network.I configure 2 machines as the following link :[URL]
But,the client machine doesn't get a ipv6 from server.
Ubuntu :: Cannot Open Tax Forms With Acroread
Jan 4, 2010I can open other PDF files (including the instruction files for form 1040), but I cannot open the form 1040 PDF with acroread. I can open the same file with evince, but I really need to do this with acroread.
Here's the output:
Code:
t@s:~$ acroread
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:57: Clearlooks configuration option "sunkenmenu" is not supported and will be ignored.
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:58: Clearlooks configuration option "menuitemstyle" is not supported and will be ignored.
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:59: Clearlooks configuration option "listviewitemstyle" is not supported and will be ignored.
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:60: Clearlooks configuration option "progressbarstyle" is not supported and will be ignored.
/usr/lib/gio/modules/libgiogconf.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiogconf.so
/usr/lib/gio/modules/libgiofam.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiofam.so
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
/usr/lib/gio/modules/libgioremote-volume-monitor.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
Programming :: Possible To Preview Forms In Qt Designer?
Feb 11, 2010In qt designer is possible to preview forms in various widget styles. This behaves somewhat like an interpreter. Does anyone know how this is done?
View 1 Replies View RelatedUbuntu :: Can't Select Text In Forms In Firefox
Jul 21, 2010I think it started after the last Firefox update - I can't select text in forms on any page - not even here, while I'm writing this. When I double click, the selection appears for a fraction of a second, and vanishes instantly. Neither can I select text by dragging, the same happens. I can still select everything with ctrl+A, but I can't select single words or sentences. It's driving me nuts. I've actually switched to Chrome because of this, but I'm missing a lot of Firefox's functionality there, so I'd rather stay with Mozilla.
View 5 Replies View Related
