OpenSUSE Install :: How To Clone The 11.4 To A New Disk
Sep 9, 2011
I used opensuse three years ago. Then I moved to ubuntu, because it was easier for me to use ubuntu at that time. Now, I move back to opensuse again. But I want to know how to clone the opensuse system to another hard disk. I mean I have my opensuse well, I do backup to my opensuse system and restore it to another harddisk with the same partition.
When I used ubuntu, I used a very good small open-source software, named 'Ucloner'. You can find it at ucloner - Backup/restore/clone your Ubuntu, and make Live-Ubuntu. - Google Project Hosting . It is very handy to backup the ubuntu system and restore or clone it to a new harddisk. Especially, when restoring the system, the grub can be installed to the new harddisc automatically with the UUID of the new harddisc (very amazing). But it is only for ubuntu. I am looking for a software with the similar function.
I have tried Clonezilla. No problem to do backup and restore. But I failed to boot the restored system even with the same harddisc. I know it is the problem of GRUB. Even reinstalling the grub, I still can not boot into the system.
My question is
1. is there any software that allows me to backup the opensuse and restore it to another harddisc with the grub installed to the new harddisc automatically?
2. If no software for question 1, what software or application is good to backup and restore the opensuse and how to reinstalled the grub to the new harddisc with different UUID?
3. Since the Ucloner is open-source, is there anybody having interest in change the ucloner code to fit for opensuse? I guess there should be much change, because ubuntu and opensuse are linux both?
View 9 Replies
ADVERTISEMENT
Apr 16, 2009
Can this be done and to restore the disk with a similar cat command.
View 3 Replies
View Related
Feb 17, 2010
I installed opensuse 11.2 64-bit edition. I installed all of the software I wanted.I now want to clone the installation to 6 other workstations that are 100% identical to the first.I used clonezilla to create the image, but all of the new workstations will not boot. This is due to the fact of the fstab being 100% cloned and other boot volume problems.Does anyone know of a good, easy way to clone opensuse 11.2 that will work?
View 9 Replies
View Related
Apr 8, 2011
I am having a problem logging into the GUI after I cloned this system from another drive. System A and System B are essentially identical except for hostname, IP, and some nfs mappings. System B's HD went bad. I bought a new drive of the same size, but Western Digital instead of Samsung. I used CloneZilla to copy all of System A's drive to the new System B's drive. I mounted the drive into System B, booted with a SUSE 11.4 Live CD, and edited fstab and menu.lst to reflect the ID of the new drive. Everything works well until it gets to the graphical log in screen. I can't log in as either the user or root, however if I change the session type to "console", I can log in just fine.
View 9 Replies
View Related
Jun 3, 2010
I have a computer, that has the bad luck to be equipped with buggy hard-drives. Actually, they need a firmware update. This firmware update will probably destroy the data on them. I also want to add one or two other hard-drives to the RAID. What I am looking for, is a tool, that makes a clone of the system as it is now. And then, when I will have upgraded the disk firmware and added the other hard-drives, I just clone the system back from the clone.
View 9 Replies
View Related
Jan 25, 2011
I was thinking about make a clone machine. I was thinking about use a old computer that have some SATA connection. One disk is source and then I add some other disk to destination. I going to have Linux on USB stick. I have look at dd and it look nice but what I can see it only use one disk to another.
Code:
dd if=/dev/hdx of=/dev/hdy
is it possible to add more then one destination?
View 7 Replies
View Related
May 20, 2010
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies
View Related
Jun 11, 2011
I have a 160Gb Hard drive with 3 partitions. sda1, sda2, sda3. sda1 & 2 are just under 20 GB each. the other 120 GB is free space. I have so many 40GB hard drives! I would like to copy (with dd) the MBR, sda1 & 2 to a 40GB hard drive and be able to just use that so I can free up my 160GB hard drives. Typically when I want to clone something, the drives are equal or larger than the original. I'm not too sure about this, and if I use code (show below), will I also get the MBR? #where sda is the 160gb with 3 partitions and drive sdb is a 40GB drive with 2 partitions.
Code:
dd if=/dev/sda1 of=sdb1
dd if=/dev/sda1 of=sdb1
Also, is there a way I can do this with 1 line, or have both dd operations running simultaneously?
View 2 Replies
View Related
Dec 11, 2010
I'm trying to clone a 2GB USB memory stick to another stick just like it (same size and brand). The src drive has three partitions, one fat, one ext2 and one encrypted (in that order). It also has an mbr. I create the clone using the following command:
dd if=/dev/xxx of=/dev/xxx bs=512k conv=noerror,notrunc
Once it's done the mbr, the ext2 and the encrypted partitions seem fine, but the fat one is slightly modified on the clone. Here is a hex dump of the (broken) clones fat partition followed by a dump of the original partition.
"Clone":
0000000 3ceb 6d90 646b 736f 7366 0000 0402 0001
0000010 0002 0002 f800 00bc 003e 0040 0000 0000
[code]....
View 3 Replies
View Related
Apr 19, 2011
I often run various computers from my Ubuntu 10.04 USB startup disk. Every now and then, people get interested and want a copy of their own. Since I have installed a few extras (VLC, codecs, flash etc) on the disk, not just the out of the box 10.04, I would like to create a clone of the USB startup disk, to give away. How can it be done?
View 2 Replies
View Related
Jul 10, 2010
I need to clone a 160GB hard drive with Linux Mint 9 (not more than 10GB used) to a 30GB SSD that is partitioned carefully (aligned to cylinder boundaries) and is currently running Ubuntu (which I wish to overwrite with Linux Mint 9). The SSD has a /boot partition, / and swap. The source (160 GB) does not have a separate boot partition. Can anyone help me fill in the steps below? /dev/sdc will be the source (160GB) and /dev/sda is the target (with partitions 1,2 and swap on 5).
make a copy of /etc/fstab from the target drive before proceeding. Ready the target partitions. Can I reuse the existing destination partitions on the SSD? Ready the filesystems on each of the target partitions. /boot is ext2, / is ext4 and swap is already set up too. As I said, all contain data (Ubuntu) that I wish to overwrite. So what steps are needed here? Do I need to erase anything (files, etc.) before the copy/clone? next, use dd to copy MBR (right?) And exclude partition table:
Code:
dd if=/dev/sdc1 of=/dev/sda1 count=1 bs=446
Mount the source and destination drives:
Code:
mount -t ext4 /dev/sdc1 /mnt/source
mount -t ext2 /dev/sda1 /mnt/boot_target
mount -t ext4 /dev/sda2 /mnt/root_target
I suppose I can leave the swap partition on the target untouched. Copy the files from the source partition to the destination
Code:
cp -a /mnt/source/boot /mnt/boot_target
cp -a /mnt/source/ /mnt/root_target
then I assume I go to /mnt/root_target and delete the /boot directory, right? Change /etc/fstab to reflect the new partitions. I mount by label. Will my partition labels be intact after this? Do I have to make any changes to GRUB? Anything else?
View 14 Replies
View Related
Apr 30, 2011
I have win7 and ubuntu on a 250gb hard drive. I would like to move this to a 1tb drive. Is it possible to clone the entire hard drive, including the MBR? Thought about doing a disk image but unsure if this is the answer. I am using win7 64 pro and ubuntu 10.10.
View 3 Replies
View Related
Sep 16, 2010
im trying to use ddrescue to clone a dying disk to a remote machine using ssh. this is my command:
Quote:
sudo ddrescue --block-size=4KiB /dev/sda1 - | ssh user@address 'cat /data/backup.img'
it returns the error "cat: can't open '/data/backup.img': No such file or directory"
View 3 Replies
View Related
Jan 17, 2011
I use clonezilla cd live to backup my Debain Squeese O.S.,
there is the possibility to create a warm backup (clone disk) of O.S. without restart the computer ?
View 2 Replies
View Related
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
Mar 23, 2010
I have just clone from my previous IDE hard disk to a bigger IDE hard disk with clonezilla. However, when I boot my system with the new hard disk using the installation disk, it says an error that "no linux partition found on hard disk".
View 4 Replies
View Related
Aug 5, 2010
What is the best software to clone a hard disk with Fedora
View 3 Replies
View Related
Sep 29, 2010
I'm running openSUSE 11.3 and screwed some things up so that I can't install anything, including UNetbootin. So I decided to completely reinstall. I'm limited to using my hard drive as there's no CD/DVD or floppy drives installed on the machine and BIOS does not support booting from USB.
I found these instructions - Install any Linux distro directly from hard disk without burning any DVD - Just Another Linux Lover Blog
From the terminal enter these commands
sudo mkdir /distro
sudo chmod `whoami`:`whoami`
cp MYLINUX.iso /distro/distro.iso
Now extract Linux_kernel & Ram_disk to /distro#
Open /boot/grub/menu.lst
#ADD NEW ENTRY#
title Install Linux
root (hdX,X)
kernel /distro/Linux_kernel
initrd /distro/Ram_disk
Reboot and select "Install Linux" from grub. Blog Widget by LinkWithin
Creating the folder "distro" on root was easy and went smoothly. I can't seem to make the second 'whoami' command work, though. I copied-and-pasted "sudo chmod `whoami`:`whoami`" into the terminal. It asks me for the root password, I enter that and then get
chmod: missing operand after `holly:holly'
Try `chmod --help' for more information.
I didn't see anyone reply in the comments of that page saying they had trouble with it, so I think I'm just being an idiot. One person did suggest adding distro at the end on another page and it gets me
chmod: invalid mode: `holly:holly'
Try `chmod --help' for more information.
View 9 Replies
View Related
Aug 31, 2011
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies
View Related
Mar 29, 2010
I need to install GRUB on my USB-drive. I've gone through variety of manuals and articles but I have strange errors during install.
1) Insert USB in my laptop.
2) My OpenSUSE automatically mount an USB-drive, so I unmount it
Code: umount /media/disk-1
3) Format USB-drive into ext3
[Code].....
View 3 Replies
View Related
Sep 13, 2011
I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
View 3 Replies
View Related
Feb 2, 2011
I have a DELL D420 without optical drive and i want to install opensuse 11.3 on it, also i don't have an external Optical drive. I want to know if it's possible to install OpenSuse 11.3 from a Flash drive or Amovible disk, and how to proceed to do that.
PS: is it a good idea to install Opensuse on dell d420: C2D ulv 1.2, 1gb ram, 60 HD ? it it'll work well.
View 3 Replies
View Related
Aug 30, 2010
Recently I was working on something on my windows partition (on the same HD as opensuse), and all the sudden windows stopped working and I got some bad sectors on my HD.
Now, my opensuse installation is on the same HD as windows, but I need to get rid of that HD soon because it's starting to get worse (and I think opensuse is randomly crashing because of it).
Is there any way to transfer my opensuse parititon/os to another hard drive?
View 9 Replies
View Related
Jun 1, 2009
I'm new to fedora (still trying it out) but have many years of experience on other distributions -- mostly gentoo. Anyway, I'm wondering if someone can tell me what all is needed to clone a fedora install. I cloned the partitions, updated fstab with real device node entries (removed all the UUID stuff), and modified grub.conf with the same changes (as well as all the normal/misc changes needed in /etc for things like hostname, network, ethx naming, etc). However when I try to boot it complains that it cant find the old UUID.
I thought this might be specified in the initrd but I uncompressed it and couldn't find any reference to the uuid anywhere. Where does fedora keep this UUID information at? Right now I'm just trying to clone a mythdora box to another one but in the past I've configured a single gentoo install and cloned it on dozens of other computers.
View 3 Replies
View Related
May 25, 2011
I have ubuntu 10.10 installed on 1TB HD. I would like to back up the full hd, on a 2TB usb HD I have. I would like an easy way to clone/backup the full installation, so if my hd fails I would be able to book the usb hd to get files or do a full reinstall. I have tried dd, but not certain if it worked correctly.Also tried clonezilla and that did not work
View 6 Replies
View Related
Mar 10, 2010
I downloaded OpenSUSE 11.2 x86. Recordered,ran. I selected language (polish) and chose "Install" (originally "instaluj ). Installer booted, but I can't install because "linuxrc" was ran. Linuxrc can't find install disk, repo. I'll install with local DVD-RAM drive.
View 5 Replies
View Related
Mar 23, 2011
Have burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies
View Related
Dec 3, 2010
My wife's laptop has XP on it, I installed Ubuntu using wubi apparently. I thought I had made a separate partition and made a true dual boot system but I guess I didn't. Is there a way to clone the wubi install to it's own partition and add the boot loader after or am I going to have to do a fresh install and set everything up again? I am surprised that she has taken to Ubuntu as well as she has, I thought she would hate it but she actually prefers it to windows now..
View 2 Replies
View Related
Jan 15, 2010
I just finish setting Fedora 10 system including all the config that I like. I back up the image by using dd command.
Code:
dd if=/dev/sda of=~/disk1.img
Now, I already have an image. how do I clone this image to second unit by using PXE boot server? I already have PXE boot server and it works since I installed Fedora from network (PXE boot).
View 3 Replies
View Related
Apr 20, 2010
The place I work has a web/dns server on opensuse 10 up and running hosting a few websites (our company one & a few vhost ones). The box was set up before I got here. Now we are wanting to create a new 11.2 server that is basically a backup / clone of 1st server in case it goes down.
View 3 Replies
View Related
