OpenSUSE Install :: Moving Opensuse From One Hard Disk To Another?

Aug 30, 2010

Recently I was working on something on my windows partition (on the same HD as opensuse), and all the sudden windows stopped working and I got some bad sectors on my HD.

Now, my opensuse installation is on the same HD as windows, but I need to get rid of that HD soon because it's starting to get worse (and I think opensuse is randomly crashing because of it).

Is there any way to transfer my opensuse parititon/os to another hard drive?

View 9 Replies


ADVERTISEMENT

OpenSUSE Install :: Added New Hard Disk And Opensuse Doesn't Boot?

Aug 31, 2011

I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.

View 7 Replies View Related

OpenSUSE Install :: Re-install OpenSUSE From Hard Disk Using The Terminal?

Sep 29, 2010

I'm running openSUSE 11.3 and screwed some things up so that I can't install anything, including UNetbootin. So I decided to completely reinstall. I'm limited to using my hard drive as there's no CD/DVD or floppy drives installed on the machine and BIOS does not support booting from USB.

I found these instructions - Install any Linux distro directly from hard disk without burning any DVD - Just Another Linux Lover Blog

From the terminal enter these commands

sudo mkdir /distro
sudo chmod `whoami`:`whoami`
cp MYLINUX.iso /distro/distro.iso
Now extract Linux_kernel & Ram_disk to /distro#
Open /boot/grub/menu.lst
#ADD NEW ENTRY#
title Install Linux
root (hdX,X)
kernel /distro/Linux_kernel
initrd /distro/Ram_disk

Reboot and select "Install Linux" from grub. Blog Widget by LinkWithin

Creating the folder "distro" on root was easy and went smoothly. I can't seem to make the second 'whoami' command work, though. I copied-and-pasted "sudo chmod `whoami`:`whoami`" into the terminal. It asks me for the root password, I enter that and then get

chmod: missing operand after `holly:holly'
Try `chmod --help' for more information.

I didn't see anyone reply in the comments of that page saying they had trouble with it, so I think I'm just being an idiot. One person did suggest adding distro at the end on another page and it gets me

chmod: invalid mode: `holly:holly'
Try `chmod --help' for more information.

View 9 Replies View Related

OpenSUSE Install :: Mount With NFS An USB Hard Disk?

Jul 5, 2011

I've used YAST to include a USB hard disk in the export list and mount it to remote machine with NFS. That worked first time the disk was mounted. On the next reboot I saw that the USB disk was mounted again in "/media" but in new folder and its previous folder existed but empty and was mounted with nfs. It seems that first nfs comes mounted in booting time and then USB gets mounted after logging as a user. USB hard disk finds its folder occupied and automatically creates new folder in "/media". What should be done in order to USB hard disk and nfs to be mounted in the same point automatically on the boot ? The second question : When I mount an external disk to be accessible remotely with nfs I get refused to unmount the disk as a USB device. Is it possible to be unmounted as a USB disk done without unmounting it as a nfs as well?

View 5 Replies View Related

OpenSUSE Install :: Hard Disk Error -1013?

Mar 13, 2010

I have a qzd notebook with an rdc 1010 flash drive. I have downloaded the new 11.2 version of opensuse and it now recognises it, so thanks for that.Only trouble is I get an error message of:Failure occured during following action: Setting disk label of disk /dev/sda to msdos. System error code was: -1013A little history is required in orderI had windows xp installed to begin with (fool me ay!) and when I installed the adobe flash player 10, it always crashed my internet explorer, so i managed to find flash player 7, which I installed and it worked (kind of; it played videos, but stallingly; although this might be to do with the fact that i was also upgrading to IE 8 at the same time) but after a few seconds of it playing a video the computer reset and the message DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER appears. It seems that this flash player was some kind of virus and I worry that it may of damaged the flash drive, or is it that it's just messed up the MBR.

View 1 Replies View Related

OpenSUSE Install :: 11.3 - Specify Hard Disk / Cannot Find Repository

Sep 19, 2010

I am new to linux. I am trying to install suse 11.3 on my desktop which has following configuration:

Intel Pentium 4 processor 32 bit
512 mb RAM
80 gb Hard Disk

I made a 20gb partition on my hard disk and formatted it as fat32 for installing suselinux on it. I changed my boot priority and booted the system from the bootable dvd. The problems are:

1). Message is displayed telling to ensure that cd 1 is in the drive. I cannot make out what this means when the dvd is already in the drive. If I press ok same message keeps coming if I press back following occurs.
2). The installation starts and asks for language and keyboard type. Then it asks me to specify the hard disk and then a message is displayed that it cannot find repository.

View 4 Replies View Related

OpenSUSE Install :: Cannot Install 12.1 M5 From Hard Disk - Error - No Repository Found

Sep 13, 2011

I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.

I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.

But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.

I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.

View 3 Replies View Related

OpenSUSE Install :: Reinstall System Without Formatting Hard Disk?

Aug 31, 2010

I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.

How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?

View 9 Replies View Related

OpenSUSE Install :: Can't Find The Java-site - Download To Hard Disk?

Jan 16, 2010

I use openSuse 11, 64 bit. I would like to install Java, but do not know how. I can find the Java-site, I can download to my hard disk, but I can't install.

View 9 Replies View Related

OpenSUSE Install :: Ubuntu In Dualboot Without Losing Any Data On Hard Disk?

Jul 2, 2010

How to install openSUSE with Ubuntu in dualboot? I have Ubuntu 10.04 and i want to install openSUSE 11.2 without losing any data on hard disk.

View 4 Replies View Related

OpenSUSE Install :: Palimpsest/Smartctl Don't Inform Hard Disk Fail?

Jun 27, 2011

I had problems with hard disk failing and bad block informations in smartctl and palimpsest.

After several avaliations a concluded that apps don't show smart informations if a hard disk partition is monted.

When i boot with livecd it shows a failure in the hard disk, but in monted system dont.

View 9 Replies View Related

OpenSUSE Install :: Boot Menu Bug – Hard Disk Arrangement – Doesn’t Play Nicely With Windows

Nov 16, 2010

i come from ubuntu installation and i have had opensuse before and i remember installing any of thede two without any problem on any of many harddisk arrangement. but thge ltest opensuse 11.3 doesnt pllay nice with my windows and ubuntu installation booting. i reember using boot loader in yast and it used to load the coorect setting from scratch. but now when i chose "propose new configuration" and it founds opensuse and three other windows!

[Code]...

View 9 Replies View Related

OpenSUSE Hardware :: OpenSuse 11.2: Hard Disk Sometimes Unmounts By Itself?

Jul 17, 2010

I set my storage hard disk to auto-mount at start up, using fstab options, but sometimes (when my computer has been on for awhile) the storage hard disk will unmount by itself....any ideas?I have already tried replacing the hard disk multiple times, and I switched from Kubuntu to Opensuse. (partially because of this).This occurance only appears after I have had the hard disk for awhile. (Western Digital Caviar Green series)
I do plan to upgrade to OpenSuse 11.3.

View 9 Replies View Related

CentOS 5 :: Moving /var And /usr Partitions To Different Hard Disk?

Apr 3, 2009

Especially /var because I am running a MYSQL server on this box. I want to know if there is a safe procedure to follow to move these partitions from the current sda2 and sda3 that they are now to sdb2 and sbd3 because this is a much bigger disk. I don't want to break MYSQL and I don't want to be down for a long period. I have heard of some people suggesting a sym link to a /newvar and /newuser on sdb but I have also read this will not work when moving to a different physical drive.

View 3 Replies View Related

OpenSUSE Hardware :: Hard Disk Frequent Head Unloads - Disk Clicking Whilst Idle?

Jun 2, 2010

I created a thread about a problem a I had with my hard disk clicking whilst idle little while ago and I may now have stumbled upon a possible solution. The strange thing with the problem is that Ubuntu/Kubuntu didn't cause this problem but Opensuse 11.2 does.

I installed Fedora 13 to have a glimpse of what all the fuss was about and noticed that I had the same problem (hard disk clicking whilst idle ~ every 20 secs or so). Now there's a wiki on this subject and a few bug reports: [url]

Problem Description

Some ATA harddrives perform very frequent head unloads under Linux significantly shortening their lifespans. Root cause

The inactivity timer for head unload is configured too aggressively either via ATA APM (Advanced Power Management) feature or other non-standard means. Such aggressive settings are very fragile to changes in IO pattern and under Linux many such drives unload their heads only to re-load them shortly. Note that this relentless unloading/reloading cycle can also be triggered under Windows by installing programs which can alter the IO pattern (e.g. certain vaccine programs which runs in background).

Now two of the listed models with this problem are basically identical to my model (Dell Inspiron 1520) and basically share the same hardware: Dell Vostro 1500 and XPS 1520.

The workaround listed is to:

set APM to 254

Furthermore, there is a script: Storage-Fixup which can also be downloaded from opensuse software search. Indeed there is a report of this for a Vostro 1500: Gmane Loom

The report suggests looking at: Disk Power Management - openSUSE which lists a method to create a configuration file to management disk power management:

My question is whether I could download the storage-fixup rpm [url] has a description of it and it can be found: Software.openSUSE.org) and install it to (hopefully) solve the issue or should I follow the method given in: Disk Power Management - openSUSE

to set APM to 254:

Code:

View 3 Replies View Related

OpenSUSE Install :: Install From DVD/Hard Disk "No Repository Found"?

Apr 3, 2011

Alright, first I burned the image I download to a DVD, first DVD didn't work, but second one did, got to the installation process where it probes everything... and at the end it said "Repository Not Found"..So I copied the image to my external hard drive..And went to install from Hard drive...did the director of the image by just putting openSUSE-11.4-DVD... etc...because it already does hd:I had tried F: before, and it didnt work either..And yet again, I get "repository not found"....btw, THIS IS FROM CLEAN INSTALL< I HAD TO ERASE XP and the external is a NTFS hard drive with about 12 gb's free.

View 9 Replies View Related

OpenSUSE Install :: Setups Not To Run In "GRUB Hard Disk Error"

Dec 18, 2009

In terms of hard disk failure when using raid 1 setup,how important is to use one of the following (example) partition setups not to run in "GRUB hard disk error" if one of the disks fails.Which method is prefered? To make "boot" partition or not?

1st:
* /boot 100 MB
* /swap 1GB
* / 10 GB
* /home (the rest of the hard disk)

[Code]...

View 9 Replies View Related

OpenSUSE :: Hard Disk Thrashing, Esp After Boot?

Apr 24, 2011

Acer Travelmate laptop, 1.3GHz Pentium M, 12MB Ram.pensuse 11.4 (upgraded from 11.3)Vanilla install, not running anything special, always startup and shutdown from scratch, never sleepFor several minutes after KDE appears and I open an app (any app, e.g. Chrome) the hard disk is going nuts. WTF is it doing and how do I stop it? Also some programs take years to start, e.g. digicam took TEN minutes the other day even after waiting a while after booting, the disk thrashing the whole time. But in 11.3 it started almost instantly.

View 9 Replies View Related

OpenSUSE Hardware :: Mount Second Hard Disk?

Jan 5, 2011

I'm running SUSE 11.3 on hard disk (a). I have a second hard disk (b) which has FreeBSD loaded and would like to copy all that info onto (a), then reformat (b).

How do I mount hard disk (b) to achieve my objective?

View 6 Replies View Related

OpenSUSE Install :: Moving Partition To A New HDD ?

Jan 1, 2010

I installed openSUSE 11.2 on an external HDD to test. I think it's brilliant, and want to move it to an internal HDD. What is the best way to do this? I don't want to lose all the programs / tweaks I've made to SUSE so far.

Coming from the Windows' world, it's as easy as taking an image of a partition and restoring it over a new HDD partition.

View 5 Replies View Related

OpenSUSE Install :: Unplug Windows Hard Drive While OpenSUSE Installs?

Jun 14, 2010

I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?

View 9 Replies View Related

Fedora :: Dual Boot - 10 And Opensuse - Both On The Same Hard Disk

Nov 1, 2009

I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?

View 7 Replies View Related

OpenSUSE :: Backup In Case Hard Disk Failure?

Jun 10, 2010

I looking for advice on what is the best way for backup on opensuse in case hard disk failure .

I have opensuse as server running samba (with some share folder) and mysql and web service. for mysql backup I run cron job using automysqlbackup script that run 3 times a day (morning , lunch , evening).

in case of hard disk failure, I wish to be put every things on new hard disk in 1or 2 hours.

do I have to use disk imaging software ?

View 3 Replies View Related

OpenSUSE Hardware :: 11.2 Does Not See My SATA3 Hard Disk / Partitions?

Apr 13, 2010

I got a new hard drive yesterday, a Seagate Baracuda XT 2000GB SATA3. I'm running it on the SATA3 jmicron chip in AHCI mode, and Opensuse 11.2 is having issues with using this hard drive properly.

The hard drive seems to take a while to detect, for one thing. After it is detected however, I am told I have no hard disk that can be used for installation. The exact message is:

"No hard disks were found for the installation. Please check your hardware!"

After that, I'm told the partitioner can't read the partitions on my hard drive properly:

"The partitioning on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.

You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or rename partitions from that disk with this tool."

I partitioned the new hard drive under Windows, with a partitioning tool called Partition Wizard (free / home version). I'm not sure if hard drives partitioned with this tool are not recognized by OpenSuse's partitioner, or if it's something else.

I already installed Windows on this hard drive, so I can't delete all the partitions I have so far and start all over again (I'm keeping my system a dual-boot between Windows 7 and openSuse 11.2). What can I do so OpenSuse will see and modify my partitions? If it is the partitioning not being understood, is there some sort of tool that can make the partition table of the hard disk linux-readable? (a free Windows program that could do such).

View 9 Replies View Related

OpenSUSE Hardware :: Possible Hard Disk Failure Imminent?

Apr 20, 2010

[System: OpenSuSE 11.0 , kernel 2.6.25.20-0.7-pae, athlon i386] I've recently begun to have problems with my Sata Hitachi disk drive; it stores all my documents and music etc. I've only begun to notice these problems when I installed the Ex2 IFS driver for Windows so I could access my data (read only) from my Windows disk. However, the problem is not exclusive to Windows; Windows blue-screens when the Sata link goes down, but SuSE attempts to re-establish a link. Here's the dmesg output (only includes output relevant to disk activity). I've also run smartcl on the disk, here's the output. Note that the output says that it's soft-resetting the link. Any clues as to what this may infer? Also, the system has sometimes failed to boot as it sees the disk as corrupted and asks me to perform a fsck, which rewrites the journal (although this may or may not have been down to the aforementioned driver possibly not playing nice with the journal, even though it is in read only mode) and restores the disk to working order.

I can have periods of days where the disk works perfectly fine on both Windows and SusE, and random events where the disk link goes down for some reason. The situation seems to be remedied by me physically pushing the Sata cable into the disk and motherboard., and returns when the computer tower is subject to a considerable vibration from a slight knock et cetera. On the other hand, this may be a power problem, some ends on a rail are faulty on my PSU and will only give power to my optical drives if they are positioned in a certain angle, although this is probably less likely as the disks don't go offline, just the link.

View 4 Replies View Related

OpenSUSE Hardware :: E_sata Hard Disk Not Seen Automatically?

Jul 21, 2010

I set my bios with AHCI, and plugged my external e-sata disk but i can't see it so far in dolphin . i also changed the policykit.conf to the following :

cat /etc/PolicyKit/PolicyKit.conf
<?xml version="1.0" encoding="UTF-8"?> <!-- -*- XML -*- -->
<!DOCTYPE pkconfig PUBLIC "-//freedesktop//DTD PolicyKit Configuration 1.0//EN"
"http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd">

[code]....

How come the partition table is not read ?

View 7 Replies View Related

OpenSUSE Install :: Moving XFS To New EXT3 Partition

Feb 5, 2009

I have an 80 GB XFS / partition which is dying. Got some errors like this:
ata9: SError: { UnrecovData Dispar BadCRC Handshk }

It's not a problem to create another partition, I've got 2 500GB and 2 1TB disks, all EXT3. I've also 2 80 GB disks, 1 for / and 1 for /home. I will remove the 2 80 GB disks but I have a lot of stuff compiled myself. I use openSUSE 11.1. Is it possible to create a 80 GB EXT3 partition on each of the 500 GB hdd, 1 for / and 1 for /home and move the data to it? must it be done with the DD command or can I easily copy everything within a live-cd. The /boot and swap are already on one of the 500GB disks, and there is no bootrecord on the 80 GB disks.

View 9 Replies View Related

OpenSUSE Install :: Reinstalling / Upgrading While Moving To A New HDD

Dec 29, 2010

I'm a plain user of Open SUSE 10.2 for more than six months now on a dual boot machine (Vista Ultimate) and I'm 80% mostly on Linux now but because of my job I still have to keep windows.

My 1TB HDD is full and I've got a new 1TB HDD to add to my system. My plan is to leave this HDD only for Vista and to use the new HDD for Open Suse, changing it to the 10.3 version and without to lose my data and my settings (keeping the Home directory).

Considering that I am a ignorant could someone give me a step by step plan as much as detailed possible, in order to succeed?

View 9 Replies View Related

OpenSUSE Install :: Moving /usr To Separate Partition?

Jul 24, 2011

I have a dual boot system with Vista and OpenSUSE 11.3 . Linux is distributed over 2 partitions: one for /home and one root partition for all the rest. As this root partition is getting filled, I thought of taking a 10 GB partition from the Vista partition and using this for the /usr folder (= 6 GB). This partition is a primary partition, while the rest of Linux is on secondary partitions.To be save, I renamed the existing /usr to /usr-old and created an empty /usr as mount point. I changed fstab to load the root partition, the /usr partition and then the /home partition.But when I started the system, there were a lot of errors about files not found in the /usr folder, lthought this folder and is content were clearly present when browsing the filesystem. What went wrong? Hard links? Other system configurations to change? Not possible to put /usr on a separate partition?

View 9 Replies View Related

OpenSUSE :: Make Files On CD Writable When Copying To Hard Disk

Jan 3, 2011

I've set up my parents' machine running KDE 4.5 and want them to use the Gwenview import function from the Device Manager popup when transferring image files off photo CDs or other inserted media, since it's the easiest method for them to comprehend. All the files on their photo discs are r-xr-xr-x by default so they're unable to rotate or modify the images once copied to their hard disk. I want to set one specific images folder on their system to automatically force any files placed there to be rw-r--r-- (and rw-rw-r-- for another shared images directory elsewhere). It seems that umask won't work since that can only take permissions away and not add them, and I'd rather avoid getting into messy ACL configuration. Is there a way to achieve this either generically or some hidden config in Gwenview itself? I use KRename myself for such tasks but this is way too complex for my parents to understand so I need something that works without them having to do anything.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved