I have win7 and ubuntu on a 250gb hard drive. I would like to move this to a 1tb drive. Is it possible to clone the entire hard drive, including the MBR? Thought about doing a disk image but unsure if this is the answer. I am using win7 64 pro and ubuntu 10.10.
View 3 RepliesI have an old Dell Dimension 2400 with XP that has a WD 40GB model# WD-XL80SD-2 that has run out of space now matter how hard I try and keep it clean. I called Tigerdirect this morning and ordered a Hitachi 500GB hard drive model# OF10381, here's my dilemma. I really want to just do away the old hard drive and use the new one but it seems as if there's not a real good way to copy the entire hard drive including the OS. I have been told that you can use a program such as norton ghost to do it. I do though have a Windows 7 disc, I am going to use a SATA host PCI card to connect the new HD. if I should back everything up from the old HD except for the OS. And then unplug the old HD and just do a fresh install with the Windows 7 disc.
View 9 Replies View RelatedI have a 16GB Ubuntu Webserver running on a Transcend SMART CF chip (Yes I know all the reasons not to). I want to move that entire system (OS, Files and structure) to an external bootable HD that will probably be closer to 100GB. What's the easiest way to do this and have it be plug and play. By which I mean I can then plug the drive into a new system and boot it up just as it was running on the old system.
View 1 Replies View RelatedI'm trying to clone a 2GB USB memory stick to another stick just like it (same size and brand). The src drive has three partitions, one fat, one ext2 and one encrypted (in that order). It also has an mbr. I create the clone using the following command:
dd if=/dev/xxx of=/dev/xxx bs=512k conv=noerror,notrunc
Once it's done the mbr, the ext2 and the encrypted partitions seem fine, but the fat one is slightly modified on the clone. Here is a hex dump of the (broken) clones fat partition followed by a dump of the original partition.
"Clone":
0000000 3ceb 6d90 646b 736f 7366 0000 0402 0001
0000010 0002 0002 f800 00bc 003e 0040 0000 0000
[code]....
I have Ubuntu 9.10 on my system and i have a lot of apps on it.is there a way that in case of a full re-installation or hard disk replacement i could have all my softwares and settings installed on the new Ubuntu installation.
View 3 Replies View RelatedI Have a Red hat 9 Installed in our Site With 5 Partitions Which work's as a Server for 3 clients .I wanted to clone the entire H.D.D of the system to a new one, So then if i have a problem i can restore it back.For Example I use Nortron Ghost for Windows Systems( but Without Portions)
View 11 Replies View RelatedAs I'm gonna transfer large amount of data folders from one hard drive to another, I wanna make sure that the transfer has not corrupted the data. how could I generate MD5SUMs of entire directory including sub directories, in a single file and later, how could I verify with the data I've just transferred.
View 1 Replies View RelatedThe situation is; I am running a web server (Ubuntu 10.10 server) on virtualbox v.4 inside Ubuntu 10.10 Desktop and now I want to clone entire web server on my brand new PC.
I found a possible solution here: [URL]
Can this be done and to restore the disk with a similar cat command.
View 3 Replies View RelatedI'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
I have some cds that have tracks that run right into each other (ie one finishes and seamlessly moves into the next one without pause). How can I backup my cds retaining their original sound?Prior to Ubuntu days, I used to just rip in mediaplayer in windows and then use then use that playlist to burn to a cd.
View 1 Replies View RelatedHow to copy bootable USB stick including MBR partition table? I have Debian Lenny installed.
View 1 Replies View RelatedI would like to copy an entire unmounted partition from one machine to another on my LAN. This is basically to perform a very direct backup of the partition.
View 1 Replies View RelatedIs there a good way from the shell to copy/clone a usb stick that have several partitions?
View 5 Replies View RelatedI have a very specific issue that I am having trouble resolving. I have an old laptop and a new laptop with a smaller HDD. I want to copy the windows partition from the new lappy to the old bigger HDD so I have room for Ubuntu. All of my files are on a Maverick install on the old lappy. How can I get all my files and windows to the old HDD and into the new laptop. I am a little stuck on this one because of my limited options.
View 8 Replies View RelatedId like to know if its possible to somehow copy an EXACT copy of my linux from one computer to "paste" on another!
And how would I be able to do this?
I installed a new 11.04 on my Thinkpad in place of the old 10.10 system, so it replaced the old /home with a new empty one. But I had previously done a partition copy of the original 10.10, complete with /home to a spare HDD so now I can copy that /home in place of the new empty /home. What's the best way to do that? Should I use 'dd'? Should I use Nautilus? Or should I partition-copy that copy of the 10.10 onto available space on the thinkpad 11.04, then manipulate the partitions to consolidate? Maybe create a separate /home partition?
View 4 Replies View Relatedi am putting a larger drive in my laptop, i have linux mint 10 KDE setup with all the software i need and running just the way i like it. is it possible to actually copy the entire partition to a external drive then place the partition back into my laptop with the new drive in it, and still have it all setup the way i had it?
basically so i dont have to reinstall everything and set it up again.if this is possible could you please explain how i can do it in the simpliest terms at all please.
I am trying to use the cp command to copy some files around but want to preserve the entire folder structure. Example:
Then within the /backup location I want to see /backup/folder1/folder2/file.
I have tried cp -a and cp -p but neither give me the above.
I was thinking about make a clone machine. I was thinking about use a old computer that have some SATA connection. One disk is source and then I add some other disk to destination. I going to have Linux on USB stick. I have look at dd and it look nice but what I can see it only use one disk to another.
Code:
dd if=/dev/hdx of=/dev/hdy
is it possible to add more then one destination?
I'm running out of space in wubi. Online wubi help didn't help much since they suggest creating extra virtual disk space(similar to having a diffrent partition i guess) .None of them speak about increasing the size of /root disk space(or root.disk). I store all files in space shared with windows or external disk and use ubuntu only to install and use softwares and browsing. So how do increase the available space for installing more softwares?
View 3 Replies View RelatedHow to Copy the entire folder contents (including sub-folders and their contents) to another folder using PUTTY? Is there any command for that?
View 3 Replies View RelatedI have a 160Gb Hard drive with 3 partitions. sda1, sda2, sda3. sda1 & 2 are just under 20 GB each. the other 120 GB is free space. I have so many 40GB hard drives! I would like to copy (with dd) the MBR, sda1 & 2 to a 40GB hard drive and be able to just use that so I can free up my 160GB hard drives. Typically when I want to clone something, the drives are equal or larger than the original. I'm not too sure about this, and if I use code (show below), will I also get the MBR? #where sda is the 160gb with 3 partitions and drive sdb is a 40GB drive with 2 partitions.
Code:
dd if=/dev/sda1 of=sdb1
dd if=/dev/sda1 of=sdb1
Also, is there a way I can do this with 1 line, or have both dd operations running simultaneously?
I would like to copy the entire file system hierarchy from one drive to another..i.e contents of each directory as well as regular files in Linux platform. Would be gratefull to know the best way to do that with possibly Linuxes in-built functions. The file system is a ext family.
View 3 Replies View RelatedI often run various computers from my Ubuntu 10.04 USB startup disk. Every now and then, people get interested and want a copy of their own. Since I have installed a few extras (VLC, codecs, flash etc) on the disk, not just the out of the box 10.04, I would like to create a clone of the USB startup disk, to give away. How can it be done?
View 2 Replies View Relatedhow do you copy an entire line and add that copy at the end of the same line?
For example, sometimes I rename a collection of files with a command like:
"mv oldfilename newfilename;"
I am able to add "mv" at the beginning, the semicolon at the end and sometimes replace a word in the middle, but... how to change a line "oldfilename" into "oldfilename oldfilename"... that is already long time a mystery to me...
I have an 500GB Iomega external drive connected to my iMac and used for the Mac Time Machine back-ups. I want to put a small partition on there that I can use to back-up my Ubuntu files which are on my laptop. I thought that I would be able to just copy the entire Home file on Ubuntu to this drive be drag and drop but this does not work. I get a notice to inform me that I do not have permission to create file there. I can however move files in the other direction (from the external drive to Ubuntu on the laptop. I assume this is because the external drive was formatted for Mac and I hope the problem will be solved if I could format a part of the drive in ext4 to accommodate the linux files.
View 7 Replies View RelatedI used opensuse three years ago. Then I moved to ubuntu, because it was easier for me to use ubuntu at that time. Now, I move back to opensuse again. But I want to know how to clone the opensuse system to another hard disk. I mean I have my opensuse well, I do backup to my opensuse system and restore it to another harddisk with the same partition.
When I used ubuntu, I used a very good small open-source software, named 'Ucloner'. You can find it at ucloner - Backup/restore/clone your Ubuntu, and make Live-Ubuntu. - Google Project Hosting . It is very handy to backup the ubuntu system and restore or clone it to a new harddisk. Especially, when restoring the system, the grub can be installed to the new harddisc automatically with the UUID of the new harddisc (very amazing). But it is only for ubuntu. I am looking for a software with the similar function.
I have tried Clonezilla. No problem to do backup and restore. But I failed to boot the restored system even with the same harddisc. I know it is the problem of GRUB. Even reinstalling the grub, I still can not boot into the system.
My question is
1. is there any software that allows me to backup the opensuse and restore it to another harddisc with the grub installed to the new harddisc automatically?
2. If no software for question 1, what software or application is good to backup and restore the opensuse and how to reinstalled the grub to the new harddisc with different UUID?
3. Since the Ucloner is open-source, is there anybody having interest in change the ucloner code to fit for opensuse? I guess there should be much change, because ubuntu and opensuse are linux both?
I am definitely non-techy, non-geeky, a GUI guy really, but learning steadily - I have been using Linux for a while now, have just moved on to Ubuntu and find it really great to use - I now feel confident enough to have just Ubuntu Linux on my Sony Vaio laptop (at the moment I have dual boot with Windows XP)
however there are just a few Windows programs that I need to use that will not run under Wine
so I would value comments/advice on my 'grand plan'
1) re-format the Windows partition so that Ubuntu can use the entire hard disk (I don't know the best way to acheive this - is it to reinstall Ubuntu using all available disk space? or is it better to just format over the Windows partition and treat it as a second hard disk?)
2) install VirtualBox and use a version of Windows as a guest OS so I can use those Windows programs when I need to - I understand this is easier than having to reboot the computer to get access to Windows
I have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.