After messing up with gnome3-branding(gfxboot),I removed itow grub is back to minimal.There is no graphical bootloader anymore.I tried reinstalling opensuse-brandingt it says "message not found"
View 9 RepliesI used KDE3 with 11.0 with some KDE4 apps till I needed some applications from the KDE4 factory tree and mistakenly left the repository active. Next time the online update also updated most of the applications I would rather keep, and as a result the KDE3 disappeared from the KDM login choices. So I have two questions:1. how to enable users to select KDE3 at login (currently I have to select failsafe mode and run startkde manually)2. how to replay back an update I didn't want to have?
Perhaps a combination of the above: can I upgrade to OS11.2 and keep KDE3? (please don't tell me to switch to KDE4, I acknowledge and appreciate the effort and the improvements that KDE4 got, but it's still not a replacement for KDE3 - there are so many simple things which are impossible in the new version)
I have successfully installed the Nvidia driver on my FC13 system that is using an Nvidia NV44 (Ge 6200) card. It seems to be working as I see the nvidia driver when I do a lsmod | grep nvidia and the glxgears program works as well as the nvidia-settings program.Basically, I did the following:
Code:
yum install kmod-nvidia-PAE
new-kernel-pkg --mkinitrd --dracut --update $(rpm -q --queryformat="%{version}-%{release}.%
[code]...
I have updated 11.3 to 11.4 with downloaded iso (64 bits). I have a ATI hd2400 card that in 11.3 had no additional or other drivers. Now after install of 11.4 the systems reboots in the splasscreen everytime I am now in failsafe mode to get graphical.
Output of /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
Subsystem: Dell Device [1028:01c4]
Kernel driver in use: agpgart-intel
00:02.0 Display controller [0380]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04) .....
I am having a very strange problem with GRUB: it refuses to boot from certain partitions, and in a very strange way. This is what I've noticed so far:When using GRUB in the default OpenSUSE 11.3 graphical interface and trying to boot it, GRUB almost always gives me Error Message 16: Inconsistent filesystem structure. The GRUB manual says that "This error is returned by the filesystem code to denote an internal error caused by the sanity checks of the filesystem structure on disk not matching what it expects. This is usually caused by a corrupt filesystem or bugs in the code handling it in GRUB. " I've ran fsck on all the partitions and neither of them has any corruption. When I switch to the non-graphical GRUB window, the message changes to Error Message 18: "Selected cylinder exceeds maximum supported by BIOS".
The GRUB manual says that "This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB in general). " However, I haven't touched any BIOS settings when the problem started to appear, and the BIOS is brand new anyway so it doesn't have such limits. When I try to boot directly from the command line, it roots to the boot partition just fine, but refuses to load the kernel, giving me the error 16 again.
When I try to boot Windows from the non-graphical GRUB list, it gives me the error 18 again, but it always succeeds when I do all the booting directly from the command line. One time I was able to boot Linux from the command line by using rootnoverify instead of root, but never again since then. One time it didn't boot Windows even from the OpenSUSE graphical interface, error 18 again. Sometimes it boots even Linux just fine, but it happens quite rarely now. The problems started appearing just recently, and without any reason that I could think of. I also ran setup again in order to reinstall GRUB, and it worked for one boot, but not any more...
My partition list is like this:
(hd0,0) Windows 7 boot, NTFS, primary
(hd0,1) Windows 7, NTFS, primary
(hd0,2) Windows XP, NTFS, primary
(hd0,3) Extended
(hd0,4) /root, EXT3, logical
(hd0,5) /home, EXT3, logical
(hd0,6) swap, logical
(hd0,7) /boot, EXT2, logical
I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies View RelatedI have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies View Relatedon Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
View 6 Replies View Relatedi was having problems with filesharing with virtualbox, so in another thread someone told me to uninstall the OSE additions and install the vbox additions on virtualbox. I have uninstalled the OSE additions and now i can't get graphical login, it is all on runlevel 3.
View 3 Replies View RelatedI used (openoffice, firefox, vlc) my acer 5920g this afternoon without any problem and without making any strange operations.When I tried to restart it an hour ago it didn't start correctly: i get a screen full of commands like
Code:
Start Unicode mode done
Starting brld done
[code]...
Main desktop upgrade no problem. Laptop upgrade no problem. With my Media machine I had a problem the the ATI build-in graphics hardware. During install it did not ask to remove the ATI driver. no graphical UI. Since all the data where backed up anyway and the original install lacked some partitioning, I did a fresh install. Had some problems with sound, which I could fix via the KDE multimedia "phonon".
View 1 Replies View RelatedAfter installing Opensuse 11.3 i get massive graphical errors after reboot. Those errors directly start after the first resolution change after grub. So i used nomodeset from now on and installed the drivers from nvidia.
After this X11 only flasht up very shortly and i got this logs:
Code:
I had an old SuSE installation (v9 or 10, I forget) on which I used to remotely login to a kde session using xdmcp. I blew this away and installed 11.3, and I just can't get it to work. I'm pretty sure I've enabled all the things I should have. there a bug?(Incidentally, I had the same problem with Ubuntu 10.10 (with Gnome), and eventually found I needed an updated version of gdm. With X tunneled through a PuTTy ssh session I can display individual X windows no probs. Also, a VNC session is rejected out of hand.)
View 9 Replies View Relatedafter a upgrade via DVD (11.3 -> 11.4) which shows no errors, i can't start the Xserver. During Startup in Grub i have an graphical enviroment.
xorg.log says:
Code:
(EE) Failed to load /usr/lib64/xorg/modules/drivers/radeon_hd.so
(II) UnloadModule: "radeonhd"
(EE) Failed to load module "radeonhd" (loader failed, 7)
(EE) No drivers available
but the file /usr/lib64/xorg/modules/drivers/radeon_hd.so is there.
[Code]...
I am now at my 6th version of my opensuse build and I can't get it to start the graphical login.I am trying my build out on a VirtualBox using the live cd.This is what happens during installation :It will install properly. No error messages at all. I get the (graphical) options screen to select language and screen resolution settings, so far so good.I select the default (top) installation for my opensuse and hit enter.Then I will get the verbose progress and when it's finished, the verbose will ask me for my user name and password.Then I enter those correctly and the verbose will tell me to enjoy.I am then left with a blinking cursor, and don't know what to do next.
This is not what should have happened since in my build I had selected Configuration > Startup > Default runlevel > 5: Graphical loginI can find no reason for this failure since on my Windows system I have tried out several other Linux systems in the same way and never experienced this problem before.During the assembling of my packages I have payed close attention to select all packages required for a graphical login.An other problem is that although I selected the default language for my build to be Dutch, the default language during setup is still English.I hope there is someone who would be kind enough to be prepared to help me out, I am so eager to start trying out my self made OS.
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
View 4 Replies View RelatedAs you can see from the title, after the openSUSE 11.3 installation it is impossible to use Ubuntu 10.4 anymore because the grub only gets these three options: openSUSE, Windows XP and openSUSE failsafe.
View 6 Replies View RelatedLast week my parents' PC conked out the day before I was due to leave the country, so in the few hours I had to try and knock up a solution, I set up a very old second machine in the house running openSUSE 11.3 with XFCE. I'd previously replaced the default login display manager with GDM, which evidently has various bugs. Aside from the cursor continually spinning around showing as busy, when I added a new user account for my parents, the login box showed two entries under my own name. It's only on hovering the mouse over the latter entry that my parents' username shows up. Anyway, I had to explain this and a million other quirks to them in a rush, but the system was all working and they managed to get me an email from it the following day.
Since then, however, when they reach the login screen they say there is just an image of a computer monitor, with the OS version and domain, but no usernames to choose from or other options anywhere, and hence they can find no way to login. I have no remote access to the machine and can only talk over the phone. I suggested a few key combos to see if anything happened, and they booted once in failsafe mode, but no luck.
What could have happened? Is there a key that would show the users again? Perhaps there's a way to get to a console login, but could they get back to a GUI easily after that? Unfortunately my parents are really not adept at these things and every instruction I give has to be repeated endlessly after which they usually get it wrong a couple of times first, so trying to do anything administrative or more clever than a few key presses or mouse clicks is going to be nigh on impossible. Running a live CD would be likely out of the question since they'd need to change the BIOS boot order first.
I've been running 11.4 for a few weeks with the nvidia driver from the repos. I read somewhere that 'nomodeset' should be added to the kernel line in menu.lst, so I added this manually. However, on rebotting my bootsplash had disappeared. I've since read that I actually didn't need this setting with the repo version of the driver so I removed it, but still no bootsplash.
[code]...
after fresh install of Opensuse 11.2 and online update, the window decoration settings disappeared from my "configure desktop" appletNow I'm doomed to some default window decorations.
View 9 Replies View RelatedI installed the pam_face_recognition package to try out but decided couldn't get it working properly so removed it via YAST. Now when I boot up I get a pop up dialogue saying the login greeter widget is missing and to check my configuration. Clicking OK on the pop up drops me to the console login.
View 4 Replies View RelatedI've been trying to get SELinux working in OpenSUSE 11.2. So far I can get to runlevel 3 with enforcing=0. Before I start tinkering with audit2allow, The 11.2 repository gives me these policy rpms:
[URL]
But that version of policy has some issues in OpenSUSE:
1) failure to allow the graphical desktop to load (even with enforcing=0) . The following message appears in the console during boot:
** (gdm:1073): WARNING **: Couldn't connect to system bus: A SELinux policy prevents this sender from sending this message to this recipient (rejected message had sender "(unset)" interface "org.freedesktop.DBus" member "Hello" erro name "(unset)" destination "org.freedesktop.DBus") startproc: exit status of parent of /usr/sbin/gdm: 1 Since enforcing is off, I'm surprised to see a message like that. SELinux shouldn't be preventing anything, so I don't see how modifying policy will solve that. Ideas?
2) Attempting to boot to runlevel 5 with kernel parms "security=selinux selinux=1 enforcing=0", I'm dropped off in runlevel 3 instead. I'm getting a couple of pages of AVC errors after boot (see below). I've tried several other versions of the policy without luck:
- the version included in Fedora 12 (refpolicy-2.2009117
- the latest release from Tresys
- the latest from the repository at Tresys
[Code]....
i have just completed update to 11.4 : all my Desktop Ikons have disappeared My Ikons were old-style KDE3 type displayed over entire desktop HOW can I restore my Ikons ?
View 4 Replies View RelatedI just used the repair tool (automatic) after doing a clean install of Suse and my Windows directory has disappeared altogether. Any chance of getting it back?
Here's the readout:
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6eb5ef98
Device Boot Start End Blocks Id System
/dev/sdb1 1 31481 252864504 7 HPFS/NTFS
/dev/sdb2 * 31482 60482 232950532+ f W95 Ext'd (LBA)
/dev/sdb3 60483 60802 2560000 7 HPFS/NTFS
/dev/sdb5 31482 31743 2104483+ 82 Linux swap / Solaris
/dev/sdb6 31744 34354 20972826 83 Linux
/dev/sdb7 34355 60482 209873128+ 83 Linux
I know how to manage them from a commandline but I was wondering if there are any graphical partition editors that understand and work with lvm2?
View 1 Replies View RelatedI just installed the Catalyst drivers under FC13 (package xorg-x11-drv-catalyst-10.9-1.fc13.i686 ) and I am superhappy, as it worked straight out of the box.
The only little annoying thing is that I lost the Plymouth graphical boot, which is now substituted with the text scrollbar...
I edited grub.conf and added
Code:
Somewhere I read that that attribute is now obsolete and has to be changed to
Code:
But that did not work either.
I am using 10.04. The grub is working properly but i can't login in graphical environment because the system stops at the ubuntu boot logo. However, TTY is working properly and i am able to login in all the tty [F1-F6]. I think the problem is with xserver but I don't know how to fix it.
View 4 Replies View RelatedMy Fedora11 hangs on boot. I have no idea where or why it is hanging so I want to disable graphical boot. I booted the installation media, the root file system mounted on /mnt, seted /mnt as my root with the chroot command and edited /etc/inittab, then unmounted and rebooted but it didn't help me. Is it possible to run gconf-editor under live cd and disable splash? How can I boot Fedora in single mode? For example use the following steps I'll be able to boot RHEL into single-user mode:
At the GRUB splash screen at boot time, press any key to enter the GRUB interactive menu.
Select Red Hat Enterprise Linux with the version of the kernel that you wish to boot and type a to append the line.
Go to the end of the line and type single as a separate word (press the Spacebar and then type single ). Press Enter to exit edit mode.
Since I've been using the nvidia drivers (from rpmfusion) and followed Leigh123's nvidia guide, I don't have a Plymouth graphical boot anymore. Instead I get the black screen and the blue/white bar at the bottom. I installed the plymouth-theme-solar (or whatever) and switched to that, updated initrd too, but no difference - same thing happened. This is an AMD64 system, latest kernel, latest nvidia drivers. Snippet of grub.conf:-
title Fedora (2.6.31.9-174.fc12.x86_64)
root (hd0,2)
kernel /vmlinuz-2.6.31.9-174.fc12.x86_64 ro root=/dev/mapper/vg_undertaker-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet selinux=0
rdblacklist=nouveau
initrd /initramfs-2.6.31.9-174.fc12.x86_64.img
Recently, I accidentally erased plymouth from my Fedora 12 system.I now have reinstalled plymouth.But I still do not have my graphical boot. How do I switch back to graphical boot?
View 2 Replies View Related