As you can see from the title, after the openSUSE 11.3 installation it is impossible to use Ubuntu 10.4 anymore because the grub only gets these three options: openSUSE, Windows XP and openSUSE failsafe.
View 6 RepliesI have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies View RelatedLast week my parents' PC conked out the day before I was due to leave the country, so in the few hours I had to try and knock up a solution, I set up a very old second machine in the house running openSUSE 11.3 with XFCE. I'd previously replaced the default login display manager with GDM, which evidently has various bugs. Aside from the cursor continually spinning around showing as busy, when I added a new user account for my parents, the login box showed two entries under my own name. It's only on hovering the mouse over the latter entry that my parents' username shows up. Anyway, I had to explain this and a million other quirks to them in a rush, but the system was all working and they managed to get me an email from it the following day.
Since then, however, when they reach the login screen they say there is just an image of a computer monitor, with the OS version and domain, but no usernames to choose from or other options anywhere, and hence they can find no way to login. I have no remote access to the machine and can only talk over the phone. I suggested a few key combos to see if anything happened, and they booted once in failsafe mode, but no luck.
What could have happened? Is there a key that would show the users again? Perhaps there's a way to get to a console login, but could they get back to a GUI easily after that? Unfortunately my parents are really not adept at these things and every instruction I give has to be repeated endlessly after which they usually get it wrong a couple of times first, so trying to do anything administrative or more clever than a few key presses or mouse clicks is going to be nigh on impossible. Running a live CD would be likely out of the question since they'd need to change the BIOS boot order first.
After messing up with gnome3-branding(gfxboot),I removed itow grub is back to minimal.There is no graphical bootloader anymore.I tried reinstalling opensuse-brandingt it says "message not found"
View 9 Replies View RelatedI've been running 11.4 for a few weeks with the nvidia driver from the repos. I read somewhere that 'nomodeset' should be added to the kernel line in menu.lst, so I added this manually. However, on rebotting my bootsplash had disappeared. I've since read that I actually didn't need this setting with the repo version of the driver so I removed it, but still no bootsplash.
[code]...
after fresh install of Opensuse 11.2 and online update, the window decoration settings disappeared from my "configure desktop" appletNow I'm doomed to some default window decorations.
View 9 Replies View RelatedI installed the pam_face_recognition package to try out but decided couldn't get it working properly so removed it via YAST. Now when I boot up I get a pop up dialogue saying the login greeter widget is missing and to check my configuration. Clicking OK on the pop up drops me to the console login.
View 4 Replies View Relatedi have just completed update to 11.4 : all my Desktop Ikons have disappeared My Ikons were old-style KDE3 type displayed over entire desktop HOW can I restore my Ikons ?
View 4 Replies View RelatedI just used the repair tool (automatic) after doing a clean install of Suse and my Windows directory has disappeared altogether. Any chance of getting it back?
Here's the readout:
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6eb5ef98
Device Boot Start End Blocks Id System
/dev/sdb1 1 31481 252864504 7 HPFS/NTFS
/dev/sdb2 * 31482 60482 232950532+ f W95 Ext'd (LBA)
/dev/sdb3 60483 60802 2560000 7 HPFS/NTFS
/dev/sdb5 31482 31743 2104483+ 82 Linux swap / Solaris
/dev/sdb6 31744 34354 20972826 83 Linux
/dev/sdb7 34355 60482 209873128+ 83 Linux
I used KDE3 with 11.0 with some KDE4 apps till I needed some applications from the KDE4 factory tree and mistakenly left the repository active. Next time the online update also updated most of the applications I would rather keep, and as a result the KDE3 disappeared from the KDM login choices. So I have two questions:1. how to enable users to select KDE3 at login (currently I have to select failsafe mode and run startkde manually)2. how to replay back an update I didn't want to have?
Perhaps a combination of the above: can I upgrade to OS11.2 and keep KDE3? (please don't tell me to switch to KDE4, I acknowledge and appreciate the effort and the improvements that KDE4 got, but it's still not a replacement for KDE3 - there are so many simple things which are impossible in the new version)
I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies View RelatedI dont quite know what ive done, but after ive reinstalled my ubuntu 10.04, my grub boot menu seems to have dissapeared. my computer will still boot after a while but with no sign of the grub menu. The problem is, that when it boots it sets of the warning buzzer on my laptop (as if it cant find anything boot) this goes on for about 10 seconds before it finally gets round to booting. is there anyway i can restore my grub boot menu?
View 3 Replies View RelatedI installed a dual boot system by installing Win7 and then Ubuntu 9.1. All fine until I needed to reinstall Win7. Now Windows has made itself the only OS. I presume that it has supperceided the GRUB. How (where) can I put the Grub back - (bearing in mind that the only way to run Ubuntu is to run it fron CD)?
View 2 Replies View RelatedIn trying to fix Windows suddenly not booting, I have arrived at the point where it does not even appear in Grub, and I cannot even begin to start it.
View 3 Replies View RelatedUbuntu disappeared from grub menu after I deleted the old kernels.
View 9 Replies View RelatedI have Lubuntu and Windows has disappeared from the GRUB. I have seen in other questions that it is usually solved editing menu.lst, but I don have such a file in /boot/grub/
[Code].....
I had to reload my XP partition and my grub menu disappeared. I followed direction from this web page [URL]. I followed Method 1. After I rebooted I got a command prompt with a notice stating Minimal BASH-like line editing is suppoerted. When I input the final command of sudo update-grub I get the unknown command error. I cannot get to either XP or Ubuntu is there anything I can do short of reloading my ubuntu?
View 2 Replies View RelatedI've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I have installed 11.2 next to my 11.1 version I have a few big problems with 11.2 and I like to completely remove it. there are 2 grub's active now. I want to remove the 11.2 grub and make the 11.1 grub master again, but I do not know where to change this, the MBR points to the 11.2 grub and changing menu.lst probably does not have any effect.
View 6 Replies View RelatedI have WinXP, Ubuntu 10.04 and Debian 6.0 installed on my Desktop.
After installing my latest distro, Debian 6.0 WinXP disappeared from my GRUB menu!
Relevant details are:
root@debian-peter:~# fdisk -l Code: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
Recently I installed Debuan "jessie". I previously had Windows 8.1 and Xubuntu installed. After installation Debian installed it's own version of GRUB, with entries for Debian, Xubuntu and Windows. The problem is that after I selected Windows when booting, GRUB menu no longer appears. It boots straight into Windows.
It's lenovo Ideapad z510 laptop, with special button that allows me to select between 4 options before booting - one of them is "Boot menu".
I didn't use it before windows "removed" GRUB, but now there are 2 options: Windows boot loader and Ubuntu. When I select Ubuntu it loads my old boot menu (from before installing Debian).
I thought that when I use update-grub from Xubuntu I will at least eb able to boot into debian. After I did that Debian option appeared in the GRUB menu, but it didn't work - black screen.
How to get GRUB menu working again (and avoid replacing it by windows boot loader)?
1 I have XP installed on HDD1 (SATA 200 Gb master). Now I installed Cetos 5.5 (use 4.1 Gb DVD1) on the second drive, HDD2 (Seagate STA 40 Gb slave.) I didnt fund the option for selecting boot location during installation, just selected second drive. I think this is my first mistaking. The Centos can�t boot up after initial installation. I disconnected the HDD1 (XP drive.) Then finished Centos install. � Second mistaking.
2 After that Sentos installed, I reconnected HDD1 but XP is disappeared. The grub.cfg shows about XP as:
Title other
Rootnoverity (hd1,0)
Chainloader +1
3 For finding XP I disconnected HDD2 (Sentos), but XP can�t be started. This message is shown up:
Just wait 5 seconds for normal startup! Boot: could not find kernel image:vmlinuz
4 I think that stuff was written by grub. I decided to get rid of them then reinstall all. I tried to deleted and create new partition, format c:, fixmbr, and fixboot, then install XP on c:. But above message still shows up when boot machine. I have to use XP install cd to start Windows XP.
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I need to install GRUB on my USB-drive. I've gone through variety of manuals and articles but I have strange errors during install.
1) Insert USB in my laptop.
2) My OpenSUSE automatically mount an USB-drive, so I unmount it
Code: umount /media/disk-1
3) Format USB-drive into ext3
[Code].....
I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
View 9 Replies View RelatedI am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies View RelatedI got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
I am having problems Loading OpenSUSE 11.04_amd64 after Installation. I Dual Boot with Windows (on dev/sda) and Linux (on dev/sdb). I have been using Ubuntu_amd64 for a while and had decided to give other Linux distros a try. I tried Debian but I ended up downloading and installing a bare-bone version and I couldn't go anywhere with it as, I am a Linux noob.
I have now downloaded and tried to install OpenSUSE 11.04. Installation was smooth but OpenSUSE will not boot. I get a black screen which says Grub Error and something like 'file not found'.