i was having problems with filesharing with virtualbox, so in another thread someone told me to uninstall the OSE additions and install the vbox additions on virtualbox. I have uninstalled the OSE additions and now i can't get graphical login, it is all on runlevel 3.
View 3 RepliesI used (openoffice, firefox, vlc) my acer 5920g this afternoon without any problem and without making any strange operations.When I tried to restart it an hour ago it didn't start correctly: i get a screen full of commands like
Code:
Start Unicode mode done
Starting brld done
[code]...
I had an old SuSE installation (v9 or 10, I forget) on which I used to remotely login to a kde session using xdmcp. I blew this away and installed 11.3, and I just can't get it to work. I'm pretty sure I've enabled all the things I should have. there a bug?(Incidentally, I had the same problem with Ubuntu 10.10 (with Gnome), and eventually found I needed an updated version of gdm. With X tunneled through a PuTTy ssh session I can display individual X windows no probs. Also, a VNC session is rejected out of hand.)
View 9 Replies View RelatedI am now at my 6th version of my opensuse build and I can't get it to start the graphical login.I am trying my build out on a VirtualBox using the live cd.This is what happens during installation :It will install properly. No error messages at all. I get the (graphical) options screen to select language and screen resolution settings, so far so good.I select the default (top) installation for my opensuse and hit enter.Then I will get the verbose progress and when it's finished, the verbose will ask me for my user name and password.Then I enter those correctly and the verbose will tell me to enjoy.I am then left with a blinking cursor, and don't know what to do next.
This is not what should have happened since in my build I had selected Configuration > Startup > Default runlevel > 5: Graphical loginI can find no reason for this failure since on my Windows system I have tried out several other Linux systems in the same way and never experienced this problem before.During the assembling of my packages I have payed close attention to select all packages required for a graphical login.An other problem is that although I selected the default language for my build to be Dutch, the default language during setup is still English.I hope there is someone who would be kind enough to be prepared to help me out, I am so eager to start trying out my self made OS.
I used KDE3 with 11.0 with some KDE4 apps till I needed some applications from the KDE4 factory tree and mistakenly left the repository active. Next time the online update also updated most of the applications I would rather keep, and as a result the KDE3 disappeared from the KDM login choices. So I have two questions:1. how to enable users to select KDE3 at login (currently I have to select failsafe mode and run startkde manually)2. how to replay back an update I didn't want to have?
Perhaps a combination of the above: can I upgrade to OS11.2 and keep KDE3? (please don't tell me to switch to KDE4, I acknowledge and appreciate the effort and the improvements that KDE4 got, but it's still not a replacement for KDE3 - there are so many simple things which are impossible in the new version)
I was reading /usr/share/kde4/config/kdm/kdmrc and see this 3 lines:
# Allow root logins?
# Default is false
#AllowRootLogin=false
this doesn't mean that root can't login in a graphical mode? (I can login as root)
[Code]...
I have an iMac G4 that I installed Jessie on successfully. However, when it boots, one of the last messages is:
[FAILED] Failed to start Load Kernel Modules.
Last line is something along the lines of:
fb: switching to nouveaufb from OFfb NVDA,NVMac
And then the text starts dissolving, and the entire screen cycles through different colors. I presume it is sitting at the graphical login prompt but it's not displaying correctly.
Based on some Google searches, it seems like I should be able to resolve this by editing /etc/modules but I can't get to that point. I have tried to get to a terminal using ctrl-alt-F1 through ctrl-alt-F12. No luck. I tried different yaboot options that were supposed to avoid using the video driver. No luck. How do I get the machine to boot straight to a regular text login instead of the X one?
This machine worked fine running Mac OS X this morning, so I don't think it's the hardware. What I can do.
I am trying to load up the NVidia driver in Fedora 15 and am stuck. After boot up the graphical login screen comes up fine but when I go to log in I get an error message and it asks me to try to login again. I need to be able to get into text mode so I can edit some files but I do not know how to do this other that starting in multi-uder mode by editing /etc/inittab (or in FC15, editing some links in /etc/systemd/system/). Is there a way to get to text mode from the graphical loginscreen or do I need to get a rescue disk and startup in rescue mode to change files?
View 4 Replies View RelatedI'm seeing really bad user login format under a standard installation and am wondering why ubuntu does this as default. I have noticed that the graphical login for gnome sizes itself to accommodate a user's exact password length. This indicates to me that somewhere on the unencrypted part of a standard installation with user encryption contains at least some indication of the content of the password length which seems a security flaw even if not a complete hole, it majorly reduces the number of attempts a cracker would have to cycle through.
And that's assuming that *only* the length is contained. Furthermore it seems that it would be MUCH better to simply display the number of characters entered into the pw field and allowing the gui to expand itself from an fixed size as the field is filled out so the the user still receives visual feedback for entering characters. Either a simple character count display should be entered into the field or a 10 dot to new line so that one can visually quickly count the number enter by multiplying from a 10base graphical observation.
I just installed 10.04, and its taking me to the console login, rather than the graphical login. When I tried the live cd, the graphical environment was good. But after installation, I dont get the graphical login , so that I can get into the desktop.
I have a ATI Mobility Radeon X1400 card on ThinkPad T60. Everything was working on 8.10, and I decided to install 10.04 and now it doesnt work.
on Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
View 6 Replies View RelatedI have updated 11.3 to 11.4 with downloaded iso (64 bits). I have a ATI hd2400 card that in 11.3 had no additional or other drivers. Now after install of 11.4 the systems reboots in the splasscreen everytime I am now in failsafe mode to get graphical.
Output of /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
Subsystem: Dell Device [1028:01c4]
Kernel driver in use: agpgart-intel
00:02.0 Display controller [0380]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04) .....
Main desktop upgrade no problem. Laptop upgrade no problem. With my Media machine I had a problem the the ATI build-in graphics hardware. During install it did not ask to remove the ATI driver. no graphical UI. Since all the data where backed up anyway and the original install lacked some partitioning, I did a fresh install. Had some problems with sound, which I could fix via the KDE multimedia "phonon".
View 1 Replies View RelatedAfter messing up with gnome3-branding(gfxboot),I removed itow grub is back to minimal.There is no graphical bootloader anymore.I tried reinstalling opensuse-brandingt it says "message not found"
View 9 Replies View RelatedI am having a very strange problem with GRUB: it refuses to boot from certain partitions, and in a very strange way. This is what I've noticed so far:When using GRUB in the default OpenSUSE 11.3 graphical interface and trying to boot it, GRUB almost always gives me Error Message 16: Inconsistent filesystem structure. The GRUB manual says that "This error is returned by the filesystem code to denote an internal error caused by the sanity checks of the filesystem structure on disk not matching what it expects. This is usually caused by a corrupt filesystem or bugs in the code handling it in GRUB. " I've ran fsck on all the partitions and neither of them has any corruption. When I switch to the non-graphical GRUB window, the message changes to Error Message 18: "Selected cylinder exceeds maximum supported by BIOS".
The GRUB manual says that "This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB in general). " However, I haven't touched any BIOS settings when the problem started to appear, and the BIOS is brand new anyway so it doesn't have such limits. When I try to boot directly from the command line, it roots to the boot partition just fine, but refuses to load the kernel, giving me the error 16 again.
When I try to boot Windows from the non-graphical GRUB list, it gives me the error 18 again, but it always succeeds when I do all the booting directly from the command line. One time I was able to boot Linux from the command line by using rootnoverify instead of root, but never again since then. One time it didn't boot Windows even from the OpenSUSE graphical interface, error 18 again. Sometimes it boots even Linux just fine, but it happens quite rarely now. The problems started appearing just recently, and without any reason that I could think of. I also ran setup again in order to reinstall GRUB, and it worked for one boot, but not any more...
My partition list is like this:
(hd0,0) Windows 7 boot, NTFS, primary
(hd0,1) Windows 7, NTFS, primary
(hd0,2) Windows XP, NTFS, primary
(hd0,3) Extended
(hd0,4) /root, EXT3, logical
(hd0,5) /home, EXT3, logical
(hd0,6) swap, logical
(hd0,7) /boot, EXT2, logical
After installing Opensuse 11.3 i get massive graphical errors after reboot. Those errors directly start after the first resolution change after grub. So i used nomodeset from now on and installed the drivers from nvidia.
After this X11 only flasht up very shortly and i got this logs:
Code:
after a upgrade via DVD (11.3 -> 11.4) which shows no errors, i can't start the Xserver. During Startup in Grub i have an graphical enviroment.
xorg.log says:
Code:
(EE) Failed to load /usr/lib64/xorg/modules/drivers/radeon_hd.so
(II) UnloadModule: "radeonhd"
(EE) Failed to load module "radeonhd" (loader failed, 7)
(EE) No drivers available
but the file /usr/lib64/xorg/modules/drivers/radeon_hd.so is there.
[Code]...
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
View 4 Replies View RelatedI've been trying to get SELinux working in OpenSUSE 11.2. So far I can get to runlevel 3 with enforcing=0. Before I start tinkering with audit2allow, The 11.2 repository gives me these policy rpms:
[URL]
But that version of policy has some issues in OpenSUSE:
1) failure to allow the graphical desktop to load (even with enforcing=0) . The following message appears in the console during boot:
** (gdm:1073): WARNING **: Couldn't connect to system bus: A SELinux policy prevents this sender from sending this message to this recipient (rejected message had sender "(unset)" interface "org.freedesktop.DBus" member "Hello" erro name "(unset)" destination "org.freedesktop.DBus") startproc: exit status of parent of /usr/sbin/gdm: 1 Since enforcing is off, I'm surprised to see a message like that. SELinux shouldn't be preventing anything, so I don't see how modifying policy will solve that. Ideas?
2) Attempting to boot to runlevel 5 with kernel parms "security=selinux selinux=1 enforcing=0", I'm dropped off in runlevel 3 instead. I'm getting a couple of pages of AVC errors after boot (see below). I've tried several other versions of the policy without luck:
- the version included in Fedora 12 (refpolicy-2.2009117
- the latest release from Tresys
- the latest from the repository at Tresys
[Code]....
I recently installed fedora 13, everything was going great, now when my computer boots it shows the slash screen and then a blank screen and nothing. its been doing it the past few days, after a few reboots it'll work but i'm unable to figure out what is causing it and today it won't show the graphical login screen at all. after the Fedora slash screen the screen goes black the power button shuts it down as normal. ctrl - alt - F2 works and lets me login text wise but I can't get the graphical login to work. nor can I boot to KDE or gnome.I do have Nvidia drivers installed, normall it'll show the nvidia slash screen before the graphical login prompt comes up and that doesn't happen. I did try init 5 and it says Nvidia drivers are loaded. 3d was working just fine I haven't done anything that I can think of to provoke this.
View 3 Replies View RelatedRecently my Ubuntu has started dropping to bash shell instead of starting the graphical login. It first asks me login name and password(in the shell) then gives me a command line. I can then type startx to start it. It seems to start alright but that is not how it is supposed to work.
Doed anyone know how I can get it back to default behavior?
It used to be that this was a service that could just be disabled in System>Preferences>Startup Services, but this is no longer the case it seems. I've tried tinkering with the runlevels in gdm.conf, but haven't had any success with it so far. I've tried commenting out the startup code in the gdm.conf as well. Also no luck.
Most of what I've found are older guides for Karmic and earlier, so if anyone has a more up-to-date solution for how to disable the gdm so I can auto-login to a terminal in Lucid
I'm having a problem booting Ubuntu. Last time I used Ubuntu I did 2 things that might have caused this:1- I added a repository to my software sources:
Code:
deb http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu (lucid main #xorg-edgers PPA)
deb src http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu (lucid main #xorg-edgers PPA)
[code]....
I've updated my ubuntu from 10.10 ==> 11.04. Now I can't login using graphical inerface. System is loading but it stops right before I should see screen with login credentials. When I use ctrl+alt+del it's going to reboot properly, the same when i push the power button it's shutting down. System works fine in failsafex mode so I can assume there's a problem with xserver etc. Using Nvidia 9500GS.
View 7 Replies View RelatedI'm using debian etch and I've installed some automatic updates, after that some programs weren't running. So I restarted the pc. Now that the computer boot up normally but when it reaches the login screen it just emit a sound in the pc's speaker,he login screen flickers and is showed another login screen again and again and again (it's automatic). I can logon using the option single-user mode in the grub options, any idead on how can I fix it?
View 5 Replies View RelatedI'm looking for a way to set arbitrary environment variables for my graphical login on linux. I am not talking about starting a terminal and exporting environment variables within the terminal, because those variables only exist within that one terminal. I want to know how to set an environment variable that will apply to all programs started in my graphical session.
In other words, what's the Xorg equivalent of ~/.bash_login?
I am facing the problem that when I login to the machine in graphical mode the machine get reboot and same time when I login to the same machine through ssh using another machine, it is successfully login to that machine,and also ,if I do ctr+lalt+f1 and login to the machine in text mode it also works,
I am using Centos 5
I was wondering if there is a way to run a script after the autologin (don't shoot me, I'll explain why) on a restart of a server.The reason I'm asking this is that I need to execute a command to start a process on the server whenever the system is rebooted BUT this command can ONLY be run from a graphical interface.. If possible I'd like to prevent any "user-action" if the server was rebooted so
View 5 Replies View RelatedMy OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View RelatedWhen I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest