Software :: Cannot Install Binary File Due To Changed MD5 Checksum
May 17, 2011
I am trying to install True Combat: Elite on my Fedora 14 machine, but when I try to install it, it tells me there is an error in the md5 checksum of the binary installer. Output:
[alex@sofy01 Desktop]$ sudo linux32 ./true.combat.elite_0.49-english.run
Verifying archive integrity...Error in MD5 checksums: 3723510cf281bc315a9009cd1ca4f0e4 is different from 7cd28449f1231ff747e08fb76d4615c3
This file was copied from a flash drive onto my hard drive. Is there any way to skip md5 checks because I really do not want to download this 200+ MB file again.
View 4 Replies
ADVERTISEMENT
Apr 12, 2010
I downloaded the DVD ISO version of OpenSuSe version 11.2 64bit from openSUSE. I checked the iso file checksum after downloading and it was correct. However after burning to DVD i booted from the disc and started the install. After getting passed the initial settings and it starts to extract all of the packages each file fails the checksum and will not install. I tried downloading again on a different computer and burning again using UltraISO using the Disc-At-Once method, again checking the ISO file's checksum before burning.
It still gives the same errors. So i loaded windows and started the windows based install and my anti-virus (Kaspersky) says the disc is infected with a trojan. How can the disc be infected when the ISO file's checksum is correct?. The computer that i am using to burn the disc is virus free according to Kaspersky and Norton Technician Toolkit.
View 7 Replies
View Related
May 5, 2011
Is there any Linux utility to combine two or more binary files into a single binary file ?
View 7 Replies
View Related
Apr 29, 2010
[b] i got downloaded qt-sdk-linux-x86_64-opensource-2010.02.bin binary file then how to install that one[]
View 5 Replies
View Related
Sep 17, 2009
I have java jdk1.5.0_08 installed on linux x86_64 architecture and I can execute java -version no problem. I took the same binaries and installed on ia64 architecture and the command java -version gives and error "cannot execute binary file" The Linux OS versions are 2.6.18-128.1.10.el5 on x86_64 and 2.6.18-128.4.1.el5 on ia64 Do you know whether the jdk1.5.0_08 binaries are compatible between x86_64 and ia64 architecture. The answer may be no, but I may be wrong and there could be some other issue. Where can I get the jdk1.5.0_08 specific to ia64 architecture for Linux version 2.6.18-128.4.1.e15
View 1 Replies
View Related
Oct 22, 2009
I have installed RHEL-5 on a 64-bit machine recently, and want to install java. Earlier when I did "java -version", it showed jre1.4.0. But for my application , I need jre 1.5.0 or later, so I decided to download jre1.6. I am the root user here and I downloaded the jre1.6 as rpm.bin as well as simple .bin format.
But the problem is that when I tried executing any of them, I am getting below error message :
" ./jre-6u16-linux-x64-rpm.bin: line 368: ./install.sfx.20520: cannot execute binary file"
Moreover, now when I tried "java -version", it is not showing any thing.
Could anybody suggest me how can I resolve this deadlock situation, as I need to install my other application at the earliest.
View 9 Replies
View Related
Sep 14, 2010
I've accidentally changed /usr/bin/php file on my server by running a cp command. I know this is bad, i just don't know how bad. Everything is working fine (websites using php), so i just wanted to know what this action could cause and also how can i restore original content.
View 4 Replies
View Related
Sep 8, 2010
I've got a few video files that came with md5's. I want to check them but I don't know how.
View 6 Replies
View Related
Jul 16, 2010
send me the code to find the md5 checksum of a file in c++.
View 7 Replies
View Related
Nov 12, 2009
Can anybody tell what command can be used to check the checksum for a file or to match the checksum with the one provided by the download provider.
View 1 Replies
View Related
Aug 12, 2010
I have downloaded a file called logkeys-0.1.1a. I unzipped it, but when I try to install (i type "sh install"), it says "/use/bin/install: cannot execute binary file".
View 11 Replies
View Related
May 10, 2011
I have several CentOS 5.5 machines running on my network; yum works just fine for them. I used the 5.5 cds to install them. I decided to grab the DVD of 5.6 and build a new machine. Can't run yum.
http://mirrors.finalasp.com/CentOS/5.6/updates/x86_64/repodata/primary.sqlite.bz2: [Errno -1] Metadata file does not match checksum
Trying other mirror.
[code]....
View 11 Replies
View Related
Jun 14, 2010
I am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems
Code:
# DRCP Section. To scp newly created archives to a remote system
if [ "$DRCP" = "yes" ]
[code]...
View 3 Replies
View Related
May 23, 2011
i am trying to convert a binary file in to ASCII using shell script. this file contains multiple types of data like string, number, bcd, etc.
View 5 Replies
View Related
Sep 1, 2011
I've had Ubuntu 11.04 installed on my desktop since it's release. Up until an hour ago, it was working fine. I clicked on an update from the update manager, now booting into a graphical mode is completely broken, (the start-up load hangs at 'Check Battery State ... [0k]'). I restarted my computer, and booted into safe mode, and launched the terminal. This all works fine. I then typed :
Code: sudo gdm start into the command prompt, hoping that I would be able to start things manually. Instead, it spat out this: Code:
gdm-binary[230]: WARNING: Unable to load file '/etc/gdm/custom.conf'. No such file or directory.
gdm-binary[230]: WARNING: Unable to find users : no seat-id found.
gdm-binary[230]: WARNING: Gdm Display: display lasted 0.070467 seconds
The last line was printed about 8 times, with slightly different times, before it gave up and failed. Some information which might help, I have Gnome 2, Unity and KDE (not sure which version), installed. My graphics card is the GTX 275, and I have driver the Nvidia driver 275.21. So yeah, I think the update has gone and moved custom.conf somewhere, but I have no idea on how to fix it. I have a graphics programming assignment due on Friday and I would be eternally grateful if I could get this fixed well before then.
View 2 Replies
View Related
Sep 7, 2010
how to verify if the file is binary or text without to open the file
View 2 Replies
View Related
Feb 18, 2010
In a project I'm working on with a few other people, I got the task of writing an assembler. The last thing I do is convert the commands into a binary representation, and jam it into a file. Now one of my teammates said he'd like to be able to "reference" the code within another program. He said he'd be able to do this if the file I output is a Linux object file. I'm thinking it'd also work as an executable. Anyway, he said he'd like to be able to grab the file and reference the binary by address. I'm still fuzzy on this, and if you're confused with what I said here, please tell me so I can ask him for better details.Anyway, I'm aware that gcc can compile files to ".o", but that's only for C/C++, and my file is just binary. I'm also aware of "ld", but I haven't seen any use of it to help me. I'm happy to hear suggestions as to what I can do. If anything, I think I'll implement a few functions to grab the bits and hand them to him in an array or something.
View 8 Replies
View Related
Dec 28, 2009
I am attempting to do a new install of OpenSUSE 11.2 x86-64 by burning a network install disk. I am having trouble getting it to work on my hardware however. Whenever I boot up with the disc, I get a "image checksum error." I have tried to redownload the image and also reburn it. The disc will boot in VirtualBox but will not boot on the machine. I do not understand what could be causing this because the CD drive in the machine is working just fine.
View 1 Replies
View Related
Apr 30, 2011
I have problem witch installing larger packages. Small packages works always. Some bigger works after few tries (like vlc-data). Large packages never works (wesnoth-1.8-music 138MB). I checked many mirrors: main, every from Poland and most from Germany. It same on kubuntu 10.10 and 11.04. My ISP doesn't use proxy of any kind. What could be the reason?
View 5 Replies
View Related
Jul 22, 2011
I have downloaded the opensuse 11.4 64 bit iso both as a direct download and as a torrent, and the md5sums for both iso images are fine.
I tried burning both, and for both of them they fail the checksum installation media test for the actual dvd.
(dvd title openSUSE-DVD-x86_640024)
I burnt them on a 32 bit Pentium 4 machine running suse 11.3, and am trying to install on an Athlon 64 3000+.
This may well be a stupid question, but do you have to burn a 64 bit iso image on a 64 bit machine, or should I be able to burn it on a P4 ok?
I should add that I had tried installing one the dvd's first, and got a lot of failed packages and ended up aborting the install.
View 3 Replies
View Related
May 16, 2015
I just installed jessie on a machine that had been running wheezy with no problems. Now I see that a kworker process is hogging nearly 100% of one of the CPUs. I am not sure how to proceed with solving the problem even after doing a number of Google searches.
I'm not sure if this is related, but I am getting the following when I run 'dmesg':
[ 3637.597975] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 42
[ 3637.597979] Raw EDID:
[ 3637.597981] 00 ff ff ff ff ff ff 00 4d d9 90 02 01 01 01 01
[Code] .....
My hardware is:
cpu:
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, 2333 MHz
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, 2000 MHz
keyboard:
/dev/input/event0 AT Translated Set 2 keyboard
mouse:
/dev/input/mice ImExPS/2 Logitech Explorer Mouse
[Code] ....
Here is the "top" display, showing 75.2% of the CPU on kworker/1:2 and 27.6% of the CPU on kworker/1.1:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4731 root 20 0 0 0 0 R 72.5 0.0 0:53.73 kworker/1:2
28 root 20 0 0 0 0 S 27.6 0.0 0:58.69 kworker/1:1
1246 dan 20 0 1668476 132720 57548 S 2.7 4.3 0:42.33 gnome-shell
4673 dan 20 0 855208 158368 65568 S 2.7 5.2 0:28.44 iceweasel
815 root 20 0 201804 29020 18728 S 1.0 0.9 0:14.30 Xorg
[Code] ....
View 10 Replies
View Related
Nov 30, 2010
How to coded version info and other information likes author and company name into the ELF binary?
I prefer the put the version info during build step.
View 5 Replies
View Related
May 28, 2010
I have asked this over on Launchpad and have found bugs filed on the eclipse bug tracker but it seems to be going nowhere so I guess ill ask here.
I am using Eclipse for some development work and having saved a file, defocus the eclipse window (to test changes in a browser) when I refocus the eclipse window I get the following error...
The file 'path omyfile' has been changed on the file system.Do you want to replace the editor contents with these changes?
I have searched and searched and this seems to be a CIFS/SAMBA problem. I even found one solution suggesting that changing his mounts from cifs to smbfs fixed his problem however that would appear not to be an option for me since using smbfs in the fstab causes cifs mounts. This problem would seem to occur in Bluefish as well as some other IDE's so it is not an Eclipse issue.
---------- LINKS TO RELATED ----------
Launchpad Question
Eclipse Bug
--------------------------------------
View 2 Replies
View Related
Dec 22, 2010
I am trying out an open source software According to its installation instruction, "Linux users with an x86 compatible platform can use the frozen package for a quick installation (Just unpack the tar file in directory an start the faces binary). "So I just did it and unpacked it. However, when I click on the application file, which is named "faces", nothing happens. I'm new to Ubuntu so I'm not sure if there is anything that I should do before I can click and run an application like this?
View 4 Replies
View Related
Jul 8, 2010
I am using Fedora12 for about three months. I generally do a yum update once a week, and all went well till yesterday when I got a long list of messages like this:
"rpmfusion-free-updates/primary_db | 473 kB 00:00
http://mirrors.tummy.com/mirrors/rpm...ry.sqlite.bz2: [Errno -1] Metadata file does not match checksum
Trying other mirror."
The above message was repeated for all the mirrors until at last it said "no more mirrors to try" and stopped. Tried again after "yum clean all", but the same problem repeats. Today I tried afresh, and got the same message.
Is this due to some recent update I did, or is there a real problem with the mirrors? Please tell me how to solve this.
View 9 Replies
View Related
Apr 6, 2010
After adding rpmforge on a fresh installation of CentOS 5.4 64bit, I received the error "Metadata file does not match checksum" so decided to try the fix yum -y remove yum-fastestmirror, As discussed at [URL]... Unfortunately, this also deinstalled yum. If I try to reinstall from my CentOS 5.4 DVD, I get:
# rpm -i --aid yum-3.2.22-20.el5.centos.noarch.rpm
error: Failed dependencies:
yum-fastestmirror is needed by yum-3.2.22-20.el5.centos.noarch
But if I try to install the yum-fastestmirror I get
# rpm -i --aid yum-fastestmirror-1.1.16-13.el5.centos.noarch.rpm
error: Failed dependencies:
yum >= 3.0 is needed by yum-fastestmirror-1.1.16-13.el5.centos.noarch
Which is a bit circular.
View 3 Replies
View Related
Sep 20, 2010
I'm new to Fedora, and haven't used any flavor of Linux in years. I'm attempting to run a few benchmarks that were given to me by my instructor, but every one I try to run gives an error "Cannot execute binary file". For instance,.inp.inThis command gives an error:bash: ./Mcf: cannot execute binary fileIt is not a permission problem, I have confirmed the file has execute permissions (one of the things I still remembered after all these years). I suspect all the benchmarks I have been given were compiled on Ubuntu. Would this be causing the problem? I do not have access to the source code, so I cannot recompile. If that is the problem, is there a way around it that doesn't involve throwing away a weekend and starting fresh on Ubuntu?
View 1 Replies
View Related
Sep 24, 2010
I found a Linux .x86 binary file that I've been looking for, but not sure what to do with it. Does this (*.x86) binary file format seem like something that could simply be run by command, or something that would need to be compiled first? There is not much information that I could find regarding the particularly file.
View 11 Replies
View Related
Nov 13, 2010
I've been trying to launch a binary file, but I keep getting this error.
Code:
[csegale@localhost pSX]$ ./pSX
[src/linux/sound.cpp, line 215]: 'snd_pcm_hw_params_set_access(pcm_handle,hwparams,SND_PCM_ACCESS_MMAP_INTERLEAVED)' returned 'Invalid argument'
[Code]....
View 2 Replies
View Related
Jul 14, 2010
I have a strange issue on one of my machines. The same thing works fine on all the others. When I execute:
Code:
sudo -u myuser -i ls
I get:
Code:
/bin/ls: /bin/ls: cannot execute binary file
On the other hand if I just run
Code:
sudo -u myuser -i
and then run ls, it executes successfully, but I don't want to stay logged in as myuser I just want to run a single command.
View 2 Replies
View Related
