I have problem witch installing larger packages. Small packages works always. Some bigger works after few tries (like vlc-data). Large packages never works (wesnoth-1.8-music 138MB). I checked many mirrors: main, every from Poland and most from Germany. It same on kubuntu 10.10 and 11.04. My ISP doesn't use proxy of any kind. What could be the reason?
View 5 RepliesI am attempting to do a new install of OpenSUSE 11.2 x86-64 by burning a network install disk. I am having trouble getting it to work on my hardware however. Whenever I boot up with the disc, I get a "image checksum error." I have tried to redownload the image and also reburn it. The disc will boot in VirtualBox but will not boot on the machine. I do not understand what could be causing this because the CD drive in the machine is working just fine.
View 1 Replies View RelatedI have downloaded the opensuse 11.4 64 bit iso both as a direct download and as a torrent, and the md5sums for both iso images are fine.
I tried burning both, and for both of them they fail the checksum installation media test for the actual dvd.
(dvd title openSUSE-DVD-x86_640024)
I burnt them on a 32 bit Pentium 4 machine running suse 11.3, and am trying to install on an Athlon 64 3000+.
This may well be a stupid question, but do you have to burn a 64 bit iso image on a 64 bit machine, or should I be able to burn it on a P4 ok?
I should add that I had tried installing one the dvd's first, and got a lot of failed packages and ended up aborting the install.
Whenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies View RelatedI get the following error on 'yum update'. I have tried 'yum clean all' and also:
rm -f /var/lib/rpm/__db*
rpm --rebuilddb
# yum update
Loaded plugins: fastestmirror, protectbase
Determining fastest mirrors
* base: mirror.sov.uk.goscomb.net
* updates: mirror.sov.uk.goscomb.net
[Code]....
I am trying to install Unbuntu 11.04 on a Via raid 0. I have windows already setup and it boots fine, but Ubuntu does not see the raid set. Running dmraid -ay (or any valid switch with dmraid) returns :
sudo dmraid -ay -v
ERROR: via: invalid checksum on /dev/sdb
ERROR: via: invalid checksum on /dev/sda
no raid disks
mainboard is Asus M2V, with 2x Hitachi 250Gb disks in raid 0 configuration set in BIOS. I have a 3rd hard disk on the onboard Marvell 88SE6121 sata controller but this is not seen at all by Ubuntu either. I was thinking of installing it here if Ubuntu does not work the RAID, but no go it would seem. I do remember installing an earlier version of ubuntu on this very same board using RAID 0 (2x 80Gb drives at that time) and the RAID was reconised and worked fine straight from live cd to full install.
I'm getting an md5 checksum error during updating. Using the update manager. I'll post a snapshot.
Screenshot-Changes applied.png (38.46 KiB) Viewed 219 times
I have a problem. When I start Yast, and it tries to download the update repository, there is a checksum error. The problem is, that this error is always there, it occured about 2 weeks ago and never disappeared. When I change the update repository to a specific one, I chose a german one, there is still that checksum error. If I say yast I want to still use the repository with the error, there comes another checksum error, if i say i dont care about that one either, it says
Code:
"Download failed:./repodata/primary.xml.gz could not be retrieved from http://download.opensuse.org/update/11.2/Progress:-[DownloadCommand.cc:195] caught EOF from server"
I try to install git packages, when I type ./configure it gives me the error:
Code:
C compiler cannot create executable
Search around, and I find a solution, install the g++ packages, simply type:
Code:
apt-get install g++
But it gives me another error
Code:
The following packages have unmet dependencies:
G++ : Depends: g++-4.4 (>= 4.4.3-1) but it is not going to be installed
E: Broken packages
I also tried
Code:
apt-get install build-essential
But I get another error
Code:
The following packages have unmet dependencies:
build-essential : Depends: libc6-dev but it is not going to be installed or
libc-dev : Depends: g++ (>= 4:4.3.1) but it is not going to be installed
E: Broken packages
Everytime I try to install Chromium via the software centre or the terminal I get this error:
The following packages have unmet dependencies:
I'm trying to update Ubuntu 10.04 after a clean installation, it downloaded 245 files,and there is an error in the indexes of the 2 last packages:Failed to fetch [URL] difiere (bad size) Failed to fetch [URL] difiere (bad size) This happens even changing the repository to main server or another through "Software origins".Update-manager doesn't conclude the update because it can't download all the packages.
View 1 Replies View RelatedI am facing issue when trying to install php-pear packages on RHEL 4,
Troubleshoot error.
My php and pear version as below.
I downloaded the DVD ISO version of OpenSuSe version 11.2 64bit from openSUSE. I checked the iso file checksum after downloading and it was correct. However after burning to DVD i booted from the disc and started the install. After getting passed the initial settings and it starts to extract all of the packages each file fails the checksum and will not install. I tried downloading again on a different computer and burning again using UltraISO using the Disc-At-Once method, again checking the ISO file's checksum before burning.
It still gives the same errors. So i loaded windows and started the windows based install and my anti-virus (Kaspersky) says the disc is infected with a trojan. How can the disc be infected when the ISO file's checksum is correct?. The computer that i am using to burn the disc is virus free according to Kaspersky and Norton Technician Toolkit.
I am trying to install True Combat: Elite on my Fedora 14 machine, but when I try to install it, it tells me there is an error in the md5 checksum of the binary installer. Output:
[alex@sofy01 Desktop]$ sudo linux32 ./true.combat.elite_0.49-english.run
Verifying archive integrity...Error in MD5 checksums: 3723510cf281bc315a9009cd1ca4f0e4 is different from 7cd28449f1231ff747e08fb76d4615c3
This file was copied from a flash drive onto my hard drive. Is there any way to skip md5 checks because I really do not want to download this 200+ MB file again.
I have an Acer Aspire One, Model PAV70 that had Windows 7 Starter on it. I booted Ubuntu 10.10 from a USB HDD and then formatted the Acer drive with Ubuntu. I then started installing Ubuntu on the newly formatted HDD and got an error near the end of the install. It said, "apt configuration problem, an attempt to configure apt to install additional packages from the cd failed." After this happened the system locked up and I had to reboot. Now I get a black screen with a white blinking cursor. I can't get the system to recognize anything. What can I do?
CPU Type: Intel(R) Atom(TM) CPU N450
CPU Speed: 1.66GHz
System BIOS Version: V3.05(DDR2)
VGA BIOS Version: Intel V2001
After a hiatus, I'm fussing with Fedora again. I'm using the 64 bit version of R13. A screen popped up saying I needed to apply fixes to the installion. The maintenance process fails, when tried several times.
FWIW, I get an analogous error associated with packages trying to install Flash into FireFox.
Is it possible that the package archive has been corrupted?
I have it running on my system (version 11.1.1) and i have installed only the kernel. i want to install several packages but i can't. yast2 -i bison-devel but i get this error:Error Download failed: File '/content' not found on medium [URL]...
View 6 Replies View RelatedI just installed jessie on a machine that had been running wheezy with no problems. Now I see that a kworker process is hogging nearly 100% of one of the CPUs. I am not sure how to proceed with solving the problem even after doing a number of Google searches.
I'm not sure if this is related, but I am getting the following when I run 'dmesg':
[ 3637.597975] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 42
[ 3637.597979] Raw EDID:
[ 3637.597981] 00 ff ff ff ff ff ff 00 4d d9 90 02 01 01 01 01
[Code] .....
My hardware is:
cpu:
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, 2333 MHz
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, 2000 MHz
keyboard:
/dev/input/event0 AT Translated Set 2 keyboard
mouse:
/dev/input/mice ImExPS/2 Logitech Explorer Mouse
[Code] ....
Here is the "top" display, showing 75.2% of the CPU on kworker/1:2 and 27.6% of the CPU on kworker/1.1:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4731 root 20 0 0 0 0 R 72.5 0.0 0:53.73 kworker/1:2
28 root 20 0 0 0 0 S 27.6 0.0 0:58.69 kworker/1:1
1246 dan 20 0 1668476 132720 57548 S 2.7 4.3 0:42.33 gnome-shell
4673 dan 20 0 855208 158368 65568 S 2.7 5.2 0:28.44 iceweasel
815 root 20 0 201804 29020 18728 S 1.0 0.9 0:14.30 Xorg
[Code] ....
After adding rpmforge on a fresh installation of CentOS 5.4 64bit, I received the error "Metadata file does not match checksum" so decided to try the fix yum -y remove yum-fastestmirror, As discussed at [URL]... Unfortunately, this also deinstalled yum. If I try to reinstall from my CentOS 5.4 DVD, I get:
# rpm -i --aid yum-3.2.22-20.el5.centos.noarch.rpm
error: Failed dependencies:
yum-fastestmirror is needed by yum-3.2.22-20.el5.centos.noarch
But if I try to install the yum-fastestmirror I get
# rpm -i --aid yum-fastestmirror-1.1.16-13.el5.centos.noarch.rpm
error: Failed dependencies:
yum >= 3.0 is needed by yum-fastestmirror-1.1.16-13.el5.centos.noarch
Which is a bit circular.
what this means? installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... dpkg: parse error, in file '/var/lib/dpkg/status' near line 11756 package 'vinagre': `Depends' field, reference to `libgconf2-4': version contains ` ' I get it while trying to update my computer.
View 2 Replies View Relatedhow to install packages offline.One person told me to try Keryx well I dowloaded the ZIP and extracted it and found the file that opens it and dubble clicked and it said "error autorun (something)" and below it said it could not find the autorun application.So I right clicked selected open with a different application and pointed it to autorun prompt(?) and it still opens up the same error.
View 1 Replies View RelatedI just upgraded from 11.2 to 11.4 and the installation/upgrade worked just perfect. I than followed the instructions in the "New User How To/FAQ", "Multimedia and restricted format" post. I was following the instruction in the 11.4 section. I added the additional repositories as explained. I then was on the section where it talks about going into software management and selecting the "Packman" repository and clicking to "switch systems packages" to the versions in this repository (packman). I than click this link and the "warning" screen appears and I am present with conflict resolution after conflict resolution dialog. It just seems that there are some many conflicts, it just seems wrong and I canceled.
The installation/upgrade appears to have worked just fine. My mail is there, audio and dvd play back worked the first try after the upgrade. I am not clear if this is what I should expect or their is something wrong or if I even need to complete this step for a successfully installation.
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies View RelatedHOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies View RelatedI've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
Yesterday after trying to remove KDE and noticing that it started removing a bunch of Gnome packages as well, I've managed to fix most of the damage. I still have one thing left. To install a .rpm package I have to do it via command line as root. If I try just double clicking it now it doesn't prompt me for the root password, then it just says, "Failed to authenticate" and doesn't finish. Also I used to be able to scale the frequency of my CPUs with the applets on the Gnome panel. When I would select a different frequency it would prompt me for the root password, then change accordingly. Now when I click it nothing happens. Can somebody tell me if there's a gconf setting or a package that was removed that could cause this?
View 2 Replies View RelatedUsing Ubuntu 10.04 on an old HP DV4000 laptop. Trying to do a backup from my laptop's disk to an external USB drive using DD while booted from an Ubuntu boot disk. The laptop's hard drive is not mounted. I was also using a checksum to verify the backup against the hard drive like so:
Code:
$ dd if=/dev/sda of=/media/usbdrive/whatever.img
$ md5sum /dev/sda > laptop.md5
$ md5sum /media/usbdrive/whatever.img > img.md5
Unfortunately over two separate attempts I have not got the checksums to match. However, I have mounted the dd image and retrieved part of the backup from the image, with no apparent corruption. Are there any reasons other than data corruption that could be causing this? I have not tried to restore from said image to see if it "works" (for obvious reasons).
E: Type 'ain' is not known on line 3 in source list /etc/apt/sources.list.d/gnome3-team-gnome3-natty.listE: The list of sources could not be read. i get this error when i try to update my packages, anybody know a fix?
View 3 Replies View RelatedI've got a few video files that came with md5's. I want to check them but I don't know how.
View 6 Replies View RelatedI'm running 2.6.32-28-generic. I have a raid1 (two 1tb drives with two partitions... one for / and one for /home.) After a power outage, I'm seeing grub complaining about /dev/md0 not existing (ALERT! /dev/md0 does not exist. Dropping to a shell!)
I booted to the latest live CD to have a look around. My dmesg output includes these ominous lines:
Code:
Here is the whole dmesg output: [url]