How do I find out which bugs/errors are detected by the system when it is loaded/booted.have seen the emergence of failed in red text briefly but did not have time to read what it says.Would prefer to send a log(file containing error log) so experienced users can see if I done something wrong or if it appears to be ok. but how do I do this?
View 2 RepliesI installed Fedora 13 on a separate partition and it deleted all of my openSUSE entries in grub. Or the boot menu, whichever is correct. From another thread, I found these commands and tried it:
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
hd0,3 contained one of my openSUSE installs. Everything went well and grub accepted all of these commands except quit. So I used esc and rebooted. The reboot brought up the grub shell again. I could find no way to boot anything. Then I used the 'repair installation' option from the 11.2 dvd and installed a new boot loader for /dev/sda2 which contains 11.2.
This was successful, so I went to the YaST bootloader tool and added /dev/sda3 (Milestone 5) and /dev/sda4 (Fedora) and rebooted. But these two partitions still boot into grub instead of loading the correct kernel.
I upgraded OpenSUSE 11.2 to 11.3 today using Zyyper on my laptop. Everything went fine with no errors whatsoever. At the end, a message was displayed at the terminal asking me if I want to see the notifications. I pressed "Y" and the system hanged there and then. I had to do a hard reboot. After reboot the system booted fine but hanged at the desktop with no response from the keyboard, mouse, touchpad, etc. The situation's same after many reboots. System boots fine but hangs at the desktop. Screen resolution changed to 800x600.Only power button works! I use it to log off and then do a reboot.
View 9 Replies View RelatedI am trying to install OpenSuse 11.3 x64 via EFI. I successfully performed a Windows 7 install and I'm trying to do the same thing with OpenSuse now. My system boots into the EFI shell. I can cd into the /efi/boot/ folder and run bootx64.efi. Immediately after I press enter I am presented with an ELILO boot: prompt which either eventually times out and continues or I can press enter and have it continue. Either way my system resets and just boots back to the EFI shell again.
Running bootx64.efi worked for starting the Windows 7 setup but it doesn't appear to be working with OpenSuse. Is this a broken feature or am I doing something wrong?
Currently I am running Ubuntu on my laptop however my desktop is still XP pro. I want to move from XP to a Linux (Ubuntu) or Unix distro (BSD). My desktop is used as my ftp server, music/network storage, and for syncing my iPod with iTunes. The only thing that is keeping me from totally reinstalling the OS on that computer is iTunes. I know there are tons of applications out there that will sync your music to your iPod however I want to still be able to use itunesu and some other features in iTunes. My plan is to run a *nix os but have xp running in virtual box for iTunes. Has anyone else done this and if you have is it a huge pain? Is there a better way to go about what I'm trying to do? I have tried to get the newer iTunes installers to work with wine but I haven't gotten it to work yet. I get errors and the errors are reported bugs on winehq.
View 5 Replies View RelatedDoes anyone know where there might be a log of the shutdown errors I see flash on the screen when I shutdown the system? I thought they'd be in the warning log. Or is there a way to freeze that screen so I can actually read what is happening?
View 4 Replies View Relatedakonadi shows errors (self test) on every startup (on different setups and with different errors) that's very annoying, everything seems to work though, so i just want to get rid of that stupid message (why should an average user of kontact solve mysql problems?). decryption of mails is not working, because of a "wrong passphrase" (says so in the mail body). I was never prompted for a passphrase and kgpg decrypts the msg.asc fine, so its a kmail problem!? the spam / ham buttons are invisible. i added them to the toolbar with no effect (meaning, they are still invisible). Removing of other buttons works.
View 1 Replies View RelatedDoes anyone know how to contact the people at bugs.kde.org ?I have tried to register but the site is not excepting the @ in my email adress.As a result, I never get the logon info.
View 3 Replies View RelatedI find that the FC 15 Xfce spin will save the user's current session except that it doesn't save what is being done with the Lyx editor. Under FC 15 Gnome 3, I found that after I added the minimize-maximize-close buttons to the top of windows, that some of the windows in Lyx (such as the one that appears for View as DVIPS) didn't respond to those buttons. (I don't remember whether Gnome 3 saved the Lyx session and I've gotten rid of Gnome 3 now.)
View 1 Replies View Relatedafter fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
View 10 Replies View RelatedI just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
I get mail from certain people I just don't want to hear from. I cannot stop their mail from coming down from the server, as one can in other OSs.Now almost everything I receive goes to Trash. so1. How can I completely block senders I don't want to receive mail from2. How can I make e-mail come to the inbox instead of trashI can read the trash, but because nothing is bolded. I have to expunge everything from trash every time..so I can't go back and check something I may have missed, from someone I wanted to hear from.
View 2 Replies View RelatedI get this error when I run gedit as root in terminal. GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
So I looked around and found something about running a system check. Well I really couldn't find to much but I did find the command fsck and running it with the -n option this is what I got.
[Code]...
As you can see I have some orphaned inodes and these are probley from a Yast2 crashing a couple of times on me getting lockup because a repo was down or not responding.
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies View RelatedI have run into a problem trying to do a DVD upgrade from 11.2 -> 11.4. My computer is setup correctly to boot from DVD ...it boots successfully from the 10.1, 10.3, 11.2 DVD so I don't think there is an issue w/ the BIOS config.
I have run md5sum on the DVD and the generated sum agrees with the values posted on the 11.4 download page so I don't think my media has been corrupted.
When I put in the 11.4 DVD and reboot the machine I see flashing from the DVD activity light and hear the disk spinup.....then it boots 11.2 from the harddisk. how to troubleshoot this...
recently I have installed a brand new machine with 11.2. Machine boots so incredibly fast so I decided to upgraded another older machine from 11.1 to 11.2. Upgrade went fine but old machine boots significantly slower. On new I see message "doing fastboot" and few seconds later KDE starts loading. Amazing. On old I just experience regular boot, speed is comparable to old 11.1.What am I missing after upgrade? Same kernel, almost same set of services. Both machines are pretty regular PCs/x86_64, however old one have faster/better hardware (more cores, more GHz, more RAM, 2 disks in software raid-0).
View 1 Replies View Relatedsometimes it starts but after login (auto login) my wallpaper appears but there in no desktop (taskbar, icons, menu!) and i can't do anything!sometimes if i reboot it goes well sometime not!first time i install openSUSE, i tried to install my VGA driver (Nvidia 9400) but it fails and then i can't boot anymore so i removed and installed openSUSE again!i thinks there is something about graphic and specially Desktop Effects! i don't want to turn it off because it's very nice
View 7 Replies View RelatedI downloaded the live cd iso and installed it on usb using this command (while it was unmounted):ddif=open SUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdc bs=4M...I then restarted and it loads into a main openSUSE screen, I choose the "OpenSUSE 11.2" and it starts loading. Then it shows the progress abr under the gecko guy and it starts to load, that moves to a few diff. places on the screen and then it goes black. Any ideas?
View 7 Replies View RelatedI have a laptop that runs openSUSE 11.2, KDE 4.3.*. I've connected an external monitor to this laptop. The problem is my laptop screen is broke and I want Linux to use my external monitor as the master output. When ever I boot it's always the laptop screen that's taken as the master and my external monitor always have the resolution of the laptop. What I want to do is disable the laptop screen and change the resolution of my external monitor when the computer boots. The following commands seem to do what I want
[code]...
I'm relevant with linux but I don't know how to make it so that when the computer boots up it asks me to login. Right now it just logs my user in.
View 3 Replies View RelatedUsing 11.2 on self-built pc with AMD 9950 on Asus M3n78 Pro mobo. Boot drive is sata, with an external ntfs 1.5 tb USB/firewire/externalSATA connection (using USB at the moment.) nVidia 9800 GT video card (8300 gt on mobo.)It takes literally hours to boot up and more hours to shutdown this system.e point I am ready to hit hardware reset to continue. This is the 5th cycle with the same problem recurring each time, except sometimes boot occurs in a normal amount of time, but shutdown/reboot always takes hours.
View 4 Replies View RelatedComputer: Toshiba Satellite A505D laptop
OS: Suse 11.2, installed from Linux Pro Magazine disc -- was running fine after formatted install (dumped Vista), been running it for a month.
Situation: Saturday, I went to an installfest for help getting my Pantech UM-175 USB aircard to work with my new laptop. One of the guys there got it running, and then we downloaded all of the updates. Following download, I shut down the laptop and hit the road. I got home last night, booted the computer a little while ago, and it came up to a command prompt rather than KDE. I was able to log in on the command prompt.
Cold and warm reboots gave the same results, as did Failsafe boot. I am assuming that something in the updates cut off KDE from starting. We did several cold boots at the installfest and it was working fine after the modem install, but BEFORE downloading the updates.
1) How do I manually launch KDE?
2) How do I get KDE to autoload again?
3) Is there anyone in the Reno, Nevada area who is a Suse guru, or are there install fests near Reno?
So after research decided to go with OpenSuse 11.4 distro.
Installation had no problems but when I try to boot into the normal mode it just gets stuck on the screen that has a loading bar. The loading bar never makes any progress. After having waited for 15min I shut down and booted from failsafe mode. That worked fine twice only and then it prompts me in the command screen for login and password. After I input both it tells me to enjoy but Im still stuck at prompt screen, never loads GUI.
Im now booting windows on my acer Aspire 5633wlmi. It has a Intel Core 2 duo t5500 processor which I understand is 64 bit. So the version of Linux I downloaded was the 64 bit one.
I have just upgraded from 11.2 to 11.3 using zypper dup (with all the necessary pre steps). After upgrading X does not start with normal boot, only starts with failsafe mode selected. Otherwise the system boots and works in normal mode, only X doesn't start. I have tried to remove and reinstall the radeon driver, but no success. Tried Xorg -configure, with no success.I post my former (11.2) and actual xorg.conf files. Could you help in getting things work normally. If only possible I would like to avoid making a clean install.
View 7 Replies View RelatedI have a VM based on SUSE 11.3 that boots into a console in run level 3. I am used GNOME so I am trying to get it installed but not having any success. I don't know a lot about the VM as I got it 2nd hand.
So far I have gone into YAST and installed gdm and all the dependencies. I have changed from Run level 3 to 5.
When I run startx I get
xauth: creating new authority file /root/ /serverauth.15072
/etc/x11/xinit/xserverrc: line 56: exec: X: not found
giving up
xinit: No such file or directory (error2): unable to connect to X server
xinit: No such process (error3): Server error.
I have Windows 7 installed, I then installed opensuse 11.4. Everything went fine with the installation, no issues. After I removed the DVD and reboot, it does not load GRUB at all and just loads into Windows 7. However if I put in the installation DVD then select to boot from local disk it loads GRUB. So now I have to load the DVD if I want to get into suse.
Not sure how to fix this. I see some of you request for such information so here it is:
# fdisk -l
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
I'm a long time user of Debian, but I'm having trouble with my partitioning process. Here is where I currently stand:
I am installing the latest Wheezy build. I am trying to install debian with an encrypted LVM that spans two hard disks.
My partitioning layout is as:
1. /home
2. /root
3. swap
4. /boot
I then added partitions 1, 2 and 3 to a physical volume group. I then took that physical volume group and added it to a logical volume. Then I encrypted the logical volume, leaving the /boot partition untouched. I was under the assumption that the only partition the system needed free to reach the loading of the LVM is the /boot partition, as it holds the files necessary for booting. But when I attempt to finalize the disk, it gives an error stating, "No root file system detected". That would be an issue as it is currently sitting inside the encrypted LV. Am I wrong in including the root partition in the encrypted LV?
What is the best way of having as little of my file system non-encrypted as possible while still allowing a proper boot?
I have a problem installing the oporating system, from a USB. I keep getting the error: Could not find Kernel: GFXboot. I have used a USB loader to put the ISO file on the flash drive as well as extracting the file using winrar. (separate occations) I have also tried both LIVE CD as well as the full DVD.
View 1 Replies View RelatedI am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
View 3 Replies View RelatedI've been using this scanner on various suse builds all the way back to version 8. This week I installed OpenSuse on a brand new computer and when I run xsane, I receive these messages.
[Code]....
The scanner will scan for a few seconds and then the entire system freezes up.