OpenSUSE Install :: System Resets And Just Boots Back To The EFI Shell Again
Oct 13, 2010
I am trying to install OpenSuse 11.3 x64 via EFI. I successfully performed a Windows 7 install and I'm trying to do the same thing with OpenSuse now. My system boots into the EFI shell. I can cd into the /efi/boot/ folder and run bootx64.efi. Immediately after I press enter I am presented with an ELILO boot: prompt which either eventually times out and continues or I can press enter and have it continue. Either way my system resets and just boots back to the EFI shell again.
Running bootx64.efi worked for starting the Windows 7 setup but it doesn't appear to be working with OpenSuse. Is this a broken feature or am I doing something wrong?
I installed Fedora 13 on a separate partition and it deleted all of my openSUSE entries in grub. Or the boot menu, whichever is correct. From another thread, I found these commands and tried it:
Code:
grub root (hd0,3) setup (hd0) quit reboot
hd0,3 contained one of my openSUSE installs. Everything went well and grub accepted all of these commands except quit. So I used esc and rebooted. The reboot brought up the grub shell again. I could find no way to boot anything. Then I used the 'repair installation' option from the 11.2 dvd and installed a new boot loader for /dev/sda2 which contains 11.2.
This was successful, so I went to the YaST bootloader tool and added /dev/sda3 (Milestone 5) and /dev/sda4 (Fedora) and rebooted. But these two partitions still boot into grub instead of loading the correct kernel.
I upgraded OpenSUSE 11.2 to 11.3 today using Zyyper on my laptop. Everything went fine with no errors whatsoever. At the end, a message was displayed at the terminal asking me if I want to see the notifications. I pressed "Y" and the system hanged there and then. I had to do a hard reboot. After reboot the system booted fine but hanged at the desktop with no response from the keyboard, mouse, touchpad, etc. The situation's same after many reboots. System boots fine but hangs at the desktop. Screen resolution changed to 800x600.Only power button works! I use it to log off and then do a reboot.
How do I find out which bugs/errors are detected by the system when it is loaded/booted.have seen the emergence of failed in red text briefly but did not have time to read what it says.Would prefer to send a log(file containing error log) so experienced users can see if I done something wrong or if it appears to be ok. but how do I do this?
since upgrade to suse 11.3 every time I reboot pc the file /etc/hosts is reset to default value. I am a web developer so I need to put in there my aliases for 127.0.0.1. It is annoying to do it again and again. Luckily, I don't restart my system very often but still I would like to avoid that.What should I do to stop this resetting? Or is there another place in 11.3 where should I put my entries?
After installing the ATI graphics driver that was suggested under System > Devices, ubuntu required a reboot. now it either hangs on boot, or boots into the Bash shell. I tried the option in the Grub boot llist to boot into recovery mode, and then teh option to fix recent update (or something like that), but it did not help. Assuming the ATI driver is the problem, how can I back it out?
I have a problem with GUI under SuSE. As root I can enter but as normal user I can't. So the splash occurs I put user name and password but the system try to enter and later it comes back. I try from CLI, I make startx from command line, the same situation. Sometime the system informs me about a error (a temporary file from /tmp(.X0~ )I must remove, I did but next time it tells me that it can't load one module (it gives me a number).
Main reason I am using openSUSE currently is because my Windows system's went bad. I haven't been able to easily restore and will probably have to do clean windows install. I want to make sure my entire openSuse system (application/OS setting/etc) backup so I can easily restore of it fast. Since this type of back takes awhile, I would preferably like do this while I am still logged into SUSE. I am where to disk cloning thing like clonezilla, but looks like I would need turn of my system entirely to get this done.
Currently my SUSE root and home are in a partition with another NTFS partition on my hard drive. I really don't want to use 'dd' to clone the entire hard disk. I would much rather store of required partitions in other locations. Hopefully, there is easy to get this done without too much of effort and time.
I have recently installed ubuntu as my main operating system, everything has been working great except every time I re-boot the resolution resets back to a default. How can I get it to default to 1440x900?
after i made the change to my shell type, that from SH to TCH, and back again, i lost my coloring for my file system, if you know what i mean, folders always come in blue, and devices in yellow hope you understand? now everything i do can't seem to differentiated between files colors anymore.
i have noticed that if vista is not the active partition, hybernate does not work. it just goes black and then back to the user icon screen to log back in. another "slight" problem was that i was not able to apply a service pack. after restoring vistas dominance i was able to install the pack. is there any other work arounds for hybernate? even though you might not be interested in cleaning up after microsoft.
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code: grub root (hd0,3) setup (hd0) quit reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code: Device Boot Start End Blocks Id System /dev/sda1 1 262 2104483+ 82 Linux swap / Solaris /dev/sda2 263 13316 104856255 83 Linux /dev/sda3 * 13317 14621 10482412+ 83 Linux
after fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
I have run into a problem trying to do a DVD upgrade from 11.2 -> 11.4. My computer is setup correctly to boot from DVD ...it boots successfully from the 10.1, 10.3, 11.2 DVD so I don't think there is an issue w/ the BIOS config.
I have run md5sum on the DVD and the generated sum agrees with the values posted on the 11.4 download page so I don't think my media has been corrupted.
When I put in the 11.4 DVD and reboot the machine I see flashing from the DVD activity light and hear the disk spinup.....then it boots 11.2 from the harddisk. how to troubleshoot this...
recently I have installed a brand new machine with 11.2. Machine boots so incredibly fast so I decided to upgraded another older machine from 11.1 to 11.2. Upgrade went fine but old machine boots significantly slower. On new I see message "doing fastboot" and few seconds later KDE starts loading. Amazing. On old I just experience regular boot, speed is comparable to old 11.1.What am I missing after upgrade? Same kernel, almost same set of services. Both machines are pretty regular PCs/x86_64, however old one have faster/better hardware (more cores, more GHz, more RAM, 2 disks in software raid-0).
sometimes it starts but after login (auto login) my wallpaper appears but there in no desktop (taskbar, icons, menu!) and i can't do anything!sometimes if i reboot it goes well sometime not!first time i install openSUSE, i tried to install my VGA driver (Nvidia 9400) but it fails and then i can't boot anymore so i removed and installed openSUSE again!i thinks there is something about graphic and specially Desktop Effects! i don't want to turn it off because it's very nice
I downloaded the live cd iso and installed it on usb using this command (while it was unmounted):ddif=open SUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdc bs=4M...I then restarted and it loads into a main openSUSE screen, I choose the "OpenSUSE 11.2" and it starts loading. Then it shows the progress abr under the gecko guy and it starts to load, that moves to a few diff. places on the screen and then it goes black. Any ideas?
I have a laptop that runs openSUSE 11.2, KDE 4.3.*. I've connected an external monitor to this laptop. The problem is my laptop screen is broke and I want Linux to use my external monitor as the master output. When ever I boot it's always the laptop screen that's taken as the master and my external monitor always have the resolution of the laptop. What I want to do is disable the laptop screen and change the resolution of my external monitor when the computer boots. The following commands seem to do what I want
Using 11.2 on self-built pc with AMD 9950 on Asus M3n78 Pro mobo. Boot drive is sata, with an external ntfs 1.5 tb USB/firewire/externalSATA connection (using USB at the moment.) nVidia 9800 GT video card (8300 gt on mobo.)It takes literally hours to boot up and more hours to shutdown this system.e point I am ready to hit hardware reset to continue. This is the 5th cycle with the same problem recurring each time, except sometimes boot occurs in a normal amount of time, but shutdown/reboot always takes hours.
Computer: Toshiba Satellite A505D laptop OS: Suse 11.2, installed from Linux Pro Magazine disc -- was running fine after formatted install (dumped Vista), been running it for a month.
Situation: Saturday, I went to an installfest for help getting my Pantech UM-175 USB aircard to work with my new laptop. One of the guys there got it running, and then we downloaded all of the updates. Following download, I shut down the laptop and hit the road. I got home last night, booted the computer a little while ago, and it came up to a command prompt rather than KDE. I was able to log in on the command prompt.
Cold and warm reboots gave the same results, as did Failsafe boot. I am assuming that something in the updates cut off KDE from starting. We did several cold boots at the installfest and it was working fine after the modem install, but BEFORE downloading the updates. 1) How do I manually launch KDE? 2) How do I get KDE to autoload again? 3) Is there anyone in the Reno, Nevada area who is a Suse guru, or are there install fests near Reno?
So after research decided to go with OpenSuse 11.4 distro.
Installation had no problems but when I try to boot into the normal mode it just gets stuck on the screen that has a loading bar. The loading bar never makes any progress. After having waited for 15min I shut down and booted from failsafe mode. That worked fine twice only and then it prompts me in the command screen for login and password. After I input both it tells me to enjoy but Im still stuck at prompt screen, never loads GUI.
Im now booting windows on my acer Aspire 5633wlmi. It has a Intel Core 2 duo t5500 processor which I understand is 64 bit. So the version of Linux I downloaded was the 64 bit one.
I have just upgraded from 11.2 to 11.3 using zypper dup (with all the necessary pre steps). After upgrading X does not start with normal boot, only starts with failsafe mode selected. Otherwise the system boots and works in normal mode, only X doesn't start. I have tried to remove and reinstall the radeon driver, but no success. Tried Xorg -configure, with no success.I post my former (11.2) and actual xorg.conf files. Could you help in getting things work normally. If only possible I would like to avoid making a clean install.
I have a VM based on SUSE 11.3 that boots into a console in run level 3. I am used GNOME so I am trying to get it installed but not having any success. I don't know a lot about the VM as I got it 2nd hand.
So far I have gone into YAST and installed gdm and all the dependencies. I have changed from Run level 3 to 5.
When I run startx I get
xauth: creating new authority file /root/ /serverauth.15072 /etc/x11/xinit/xserverrc: line 56: exec: X: not found giving up xinit: No such file or directory (error2): unable to connect to X server xinit: No such process (error3): Server error.
I have Windows 7 installed, I then installed opensuse 11.4. Everything went fine with the installation, no issues. After I removed the DVD and reboot, it does not load GRUB at all and just loads into Windows 7. However if I put in the installation DVD then select to boot from local disk it loads GRUB. So now I have to load the DVD if I want to get into suse.
Not sure how to fix this. I see some of you request for such information so here it is: # fdisk -l
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes
A bootable flash drive was made with persistance on a 4GB drive off of a live kubuntu DVD using "Make USB Startup Disk." When the computer boots off the flash drive it boots to a Busybox built-in-shell and the message "Unable to find a medium containing a live file system." appears.
1) Is something wrong? I was expecting the computer would boot off the flash drive to a desk top, not a (text) command line shell.
2) Can an iso of one of the live distros such as Ubuntu be installed on a flash drive so that the flash drive will boot the same as the live DVD? That is, I use the live DVD but would prefer to do the same thing off of a flash drive.
First, let me start off by saying that for the past 5-6 months I've been using Linux stand-alone without Windows at all. Recently though, I got netflix and found that there is no support for Linux distros. So, begrudgingly, I installed a small Windows Partition on my computer. So here's the problem: I can't boot back into Ubuntu. Whenever I turn on my computer, it automatically boots up into Windows 7. I know my Ubuntu partition is still there, because when I boot from my live disc I can see it. Is there a way I can fix this using Windows and/or a live disc?
