I'm running openSUSE 11.4 (gnome) and I'm trying to transfer files to my windows partition and it says that I don't have the permission to do so. How do I gain access to it?
[URL]
mounting my windows partition.. I've got it set up under /etc/fstab, but anytime I try and open it (as local user) I get permission denied.
[Code]...
I have modified /etc/sudoers using visudo command to give the user "runner" to give all access without password.capture of sudoers file
# User privilege specification
root ALL=(ALL) NOPASSWD: ALL
runner ALL=(ALL) NOPASSWD: ALL
But still the "runner" is getting permission denied error when trying to open files with "(-rw-------)" permission in/shutdown
I'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:
An error occurred: Permission Denied For more information, see the log file: c:...
After some update every time I run update from the Yast or zypper I frequently get errors like the following (with zypper):
Code:
Permission to access 'http://download.opensuse.org/update/11.2/rpm/x86_64/unscd-0.43_0.45-2.1_0.2.1.x86_64.delta.rpm' denied.
Abort, retry, ignore? [a/r/i/?] (a):
If I type <r> then download continues. Is there any way to fix that or at least make it retry automatically?
I have created a new partition
/dev/cciss/c0d0p2 8489 17709 74067682+ 83 Linux
I formatted it with
mkfs.ext3 /dev/cciss/c0d0p2
[code]....
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
The log:
Also i try this v Ubuntu 11.04 Ubuntu 10.10
I have followed that many post about using a Windows mount, and still have an issue.
Using Ubuntu 8.04 to mount a shared on a Windows 2003 Server.
I have the fstab method with this line:
//server/xms /mnt/xms cifs defaults,uid=1000,gid=1000,credentials=/root/.smbcredentials 0 0
or
//server/xms /mnt/xms cifs credentials=/root/.smbcredentials,iocharset=utf8,file_mode=0777,dir_ mode=0777 0 0
Both work when doing a mount /mnt/xms command. I can ls the directory on the windows share. I can cat files from the windows share.
If I touch or mkdir in the windows share I get "Permission denied"
I have a written a java code to ftp a file from the windows box to unix box. It keeps giving me the following error : "java.io.FileNotFoundException: PORT 204,63,56,5,16,78: 550 Permission denied." I am able to ftp manually from windows to unix.
View 5 Replies View RelatedI have my ubuntu comp setup as a media server and works fine with mythtv etc but I also want to access the files from my computers in the other rooms (most have windows 7). I was able to share the file containing the videos easy enough by right clicking the file and checking all of the sharing options the first time. I have been able to access all the files that i originally put in the folder and stream video to my other computers without issue.
However any new files I add to the folders I am now unable to access. The files show up but when I click on them it says I don't have permission. I have tried unsharing the folder and redoing it but I come to the same issue. I am sure I am just forgetting an easy step but I can't think of what that is. Also want to make sure that any new files I add to this folder will work instantly across the network.
Mount a Windows share where my user account has admin privileges. All permissions granted to the share on the windows pc side.Mount statement is as follows:sudo mount -t smbfs -o username=johndoe //winname/directoryname /mnt/tmp/Share mounts ok but does not let me create or write to an existing file. When I select Properties on the directory it says that permissions are unknown on the share looking at it from Ubuntu.
View 4 Replies View RelatedQuite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
View 1 Replies View RelatedI'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?
View 7 Replies View RelatedI recently installed freeradius using Yast,but wehen I tried to run it in a debug mode code...
View 4 Replies View RelatedI noticed when running "ps -ef" that there are a bunch of processes listed with brackets. ie "[process]". Some of them appear to be daemons and others look more like kernel modules? I haven't found a program directly associated with them and was hoping somebody could clarify this for me?
Also, if I run a search of the file system with sudo or as root, there is a directory in my home that returns a permission denied. I understand permissions but shouldn't operations as root be able to do/access anything on the system?
After an upgrade to opensuse 11.3 from 11.2 it turns out that cron uses pam for authentication. Now I have one user 'mythtv' which does not have a login and is not part of the 'users' group. This user is being denied access (permission denied messages in /var/log/messages from crond).
Now, I have been experimenting with the /etc/pam.d/crond config file. I wanted to use the pam_listfile module to grant access to this specific user without authentication. That however didn't work and I have now narrowed down the problem even more.
When I use this for my crond file
Code...
What could be the problem here?
I am trying to connect to my web host via ssh. I can do this on Windows using Putty without issue. However, if I run this on Linux, I receive a "permission denied" when I am prompted for my login and password. It's obviously making some type of connection, otherwise it wouldn't be prompting me for authentication.I initially thought this was a firewall issue.I opened up port 22 and I even tried disabling the firewall altogether.However, I still received this error.
View 9 Replies View Relatedi have client and server PCs, both with openSuse 11.2.
on the server side, i have mounted HD partition to /vmshare dir. relevant line in /etc/fstab reads:
Code:
/dev/disk/by-id/ata-WDC_WD3200AAJS-07B4A0_WD-WCAT16493946-part2 /vmshare reiserfs user,acl 1 2
i want to export /vmshare dir via nfs. i have configured it through yast and resulting line in /etc/exports reads:
Code:
/vmshare *(rw,root_squash,sync,no_subtree_check,crossmnt)
the permissions for this directory is drwxrwxr-x root vmshare.
i can successfully mount the exported dir on client side, i can move between directories and list contents, but i can't write into it (not even as a root). on the server side, i can write to the directory only as root. the vmshare group is created on both machines with same gid as well as all users have same uids. firewalls are down.y.
I'm trying to install the Aurora engine for themes on Ubuntu 9, and I'm pretty new at all this... so sorry if this error message is a little long... it goes through the installation, then it gives me an error message.
Here it is:
Now run make.
I am trying to install an application from the media after typing the INSTALL command I get permission denied even as the root. What is the reason ? I am running SUSE 11.1.
View 5 Replies View RelatedI'm trying to install netpbm on my dedicated server and I'm getting the follow message every time I try to run ./configure
bash:
And I know I have permission to run ./configure because I tried it on a different software and it ran just fine.
And I can't even do the make either because I got a permission denied again. Can anyone help me out here? Thanks.
My dedicated server is running CentOS 5.
When I installed OpenSuse 11.2 it mounted I configured to mount all of my windows/NTFS partition. However, one problem is that only root can write to it. I was trying to change it to '777' permission. However, as root I can't change permission. chmod doesn't work and neither does using nautilus (as root) work.I even tried unmounting it and then doing a chmod. That didn't work either.
View 1 Replies View RelatedI am trying to use VirtualBox which worked just a week ago (I haven't changed anything with it) but now it fails. When I try to start it (from the command line) with /usr/bin/VirtualBox, as a regular user, it fails.
View 6 Replies View RelatedI have a usb serial adapter and was happily using minicom with it under openSUSE 11.2. I've upgraded to openSUSE 11.3 and I can only use minicom with this serial adapter as root. I had previously had problems writing to /var/lock under openSUSE 11.2 which I worked around by changing the minicom config to use /tmp as its lock file location.
Unfortunately my laptop doesn't have a built in serial port so I can't tell if its a general problem or something specific to the /dev/ttyUSB0 device. This is the output I get when I run minicom with my regular user account. I get the same output whether the lock file location is set to /tmp or /var/lock
Code:minicom usb0 Device /dev/ttyUSB0 lock failed: Permission denied. Before I started tinkering my user belonged to the following groups groups=16(dialout),33(video),100(users) I've since added 5(tty),14(uucp),21(console) but still no joy.
I'm configuring Amanda Enterprise on an OpenSuSE 11.3 system, and everything but the scheduled backups are running. I decided to try and fix it tonight, but I'm pretty fed up by now.
So here's the background:
The application creates an account on the box named "amandabackup" and adds it to the 'video' and 'disk' groups.
It generates cron jobs in /etc/zmanda/zmc_aee/crontab, which is configured as the location of the crontab file for the amandabackup user.
The crontab is owned by amandabackup:disk with a mask of 644.
So I played around with it a little bit; I ran the backup task manually as amandabackup, which worked fine.
I then tried adding the following to the crontab:
And touched amandacron.log, then made sure it was owned by amandabackup with a mask of 644 (i also tried /etc/amanda/amandacron.log, which is a directory the account stores backup session configs in, so I know it can write to it properly). The file is never updated. I tried adding amandabackup to different groups (it's currently been added to the "Users" group), with no success. I tried a symlink to the crontab file in /etc/cron.d to see if that would make a difference, but it didn't.
At this point, I went online and tried some more stuff I found:
I checked /var/log/mail/amandabackup - everything *but* cron jobs were reporting to it.
I verified cron was running with both "ps -ef | grep cron" and "rccron status"
I ensured /var/spool/cron/tabs/amandabackup existed, showed the proper entries, and was set to 644. (this one's the important bit)I checked /var/log/messages, and every minute on the dot I see: <timestamp> /usr/sbin/cron[PID]: Permission Denied
I ensured there was no /etc/cron.allow, and that /etc/cron.deny did not contain amandabackup.
I tried making an /etc/cron.allow, adding amandabackup, and restarting the cron daemon, but this did nothing.
I don't think I've forgotten anything, but my attempts have been getting progressively more feverish, so I'm not positive. Is there some annoying YAST cron panel I'm not seeing? Is there some way of getting more verbose logging out of the cron daemon than just "permission denied"? Is there some draconian rule about crontabs only working based on some otherwise-arbitrary account setting?
11.3 in use with KDE. When I plug in an USB stick or my HTC phone into the USB connector the device is recognised but can't be opened in dolphin. This is the error message:
Code:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy:
org.freedesktop.hal.storage.mount-removable
auth_admin_keep_always <-- (action, result)
but the device is shown in dolphin as a removable device and
Code:
# lsusb
Bus 001 Device 005: ID 0bb4:0ff9 High Tech Computer Corp.
As root I get the following result: ngssuse:~ # traceroute -nI 10.200.123.45
Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied. Is this a bug?
I wanted to install Matlab2011 in fedora15 and i receive this following: Preparing installation files Installing ./install: line 589: /tmp/mathworks_2110/java/jre/glnxa64/jre/bin/java: Permission denied Finished. I think the problem was Java, but I updated java and still is not working.
View 1 Replies View RelatedFirstly, i'm NEW to Linux and my very first time with DSL. I'm installing this on an older Dell Latitude laptop.
I just finally got the DSL installed on my HDD successfully and then I added feh to start and run at start up, then I rebooted and now i'm getting this error:
No, directory, logging in with HOME=/ -bash: cd: /home/dsl: Permission denied
I have tried reading numerous websites but none explains to the level whereby I can understand. I even tried rebooting from the CD, but could not figure out how/what to do next?
The question is, can someone explain how I can use the DSL CD to try to correct this error. More importantly, can you explain in layman terms so that I can actually put it good use.
Also, some additional questions I have....when you download a file where does it save to?
I need to install CmapTools, but it won't let me. Tried to install a .bin but "bash: ./CmapTools64.bin: Permission denied".
View 6 Replies View Related