I'm dual booting Windows 7 and openSUSE. I attempted to start up my computer, and got ERROR 17 on the GRUB loading page. I am assuming this is related to me disabling the openSUSE uninstaller on startup in Windows.installer seemed completely superfluous.
View 9 Replies
I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
View 9 Replies View RelatedI'm wondering how I would go about dual-booting Ubuntu with openSUSE installed first?
I'm just a little bit concerned about the versions of Grub overwriting the openSUSE version or theme or something.
Would it work okay if I just shrink my openSUSE partition and then set the Ubuntu installer to install Ubuntu to the free space only or do I need to edit the grub file and stuff?
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
I resized my windows c drive to make another drive which also has Open SUSE 11.4 dual booting which was working fine.
After reboot I get missing operating system so I boot the live Opensuse DVD and the windows and Linux is still there so I tried the boot configure tool in YAST but get the error because of partitioning the boot loader cannot be installed properly
Can I make a boot floppy somehow? I now have a grub menu when it boot sup but do not know what to do now
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
My friend recently installed ubuntu to his existing computer which had windows XP. Today when he tried to start the PC it showed the error
[Code]...
I'm dual-booting windows 7 on (hd0,0) and Fedora 13 on (hd0,4) and it's working fine until I repaired my windows 7. Afiter I did the repair on my windows 7, The booting sequence now skips the grub menu and automatically boots into windows without allowing me to take my pick.
View 1 Replies View RelatedI have a 2008 white MacBook.Dual booting Mac OS X and 11.3?
View 1 Replies View RelatedI was trying to install a dual boot with OS X and this is what it told me:
"delete partition /dev/sda1"
As far as I can tell, this means it wants to delete OS X. On my mac's terminal, the linux partition is "disk0s3". Am I correct to assume that I should be custom partitioning in the OpenSUSE installer and have it create all its partitions out of sda3 only?
I found this tutorial about dual booting Suse 11.0 & XP. Is it suitable also for Suse 11.1 & win7, or should I find another tutorial? Can you recommend a good tutorial for dual-booting Suse 11.1 & Win7 ? I've searched a lot but didn't find any.
View 2 Replies View RelatedJust sucessfully installed a sual boot with 11.2/ubuntu 10.4. 11.2 was installed first, than ubuntu. ubuntu recognizes and displays 11.2 on its bootloader, 1..2 does ot show ubuntu on its boot menu. so this mean I have to edit menu.lst and physically add the menu entry (root, load the kenel, and load initrd)....correct?
View 9 Replies View Relatedi decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I want to try OpenSUSE but don't want to get rid of Ubuntu yet. How can I install it so I will be able to dual boot? I have an empty partition of ~150GB ready for it.When I am installing OpenSUSE 11.3 I get this content in the boot section:
Code:
The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot.
[code]...
I am currently running windows 7, i would like to be able to dual-boot with openSuse 11.3 64-bit, at the moment I have two seperate partitions each 111gb in size and i wish to install suse onto the D: partition without effecting my windows installation or any data on the c drive.
When i got to the "Discs" stage of the installation i was very confused by this as i am completely new to Linux and dual-booting, i thought it would be a simple case of selecting my d: drive and installing straight to that but i cannot work out how to do this.
I currently have Ubuntu 10.04 LTS installed on my PC. The details of how it got installed I cannot explain... I installed it on a HD that was not partitioned and I accepted all the defaults that Ubuntu suggested. So as far as I know right now Ubuntu "owns" the whole HD.
I now would like to create a dual-boot system by installing openSUSE 11.3 alongside Ubuntu 10.04 LTS. By reading things here and there, my guess is that I need to create a partition for openSUSE by shrinking the one for Ubuntu. But I am really not sure.
So I downloaded the CD version (GNOME) only of openSUSE, launched the installer and the process came to the following suggestions which is basically all Greek to me:
* Delete partition /dev/sda1
* Create root volume /dev/sda1 with ext4
* Create volume /dev/sda3 for /home with ext4
* Use /dev/sda5 as swap
As I said before, what I would like to do is install openSUSE side-by- side with Ubuntu and create a dual-boot system. I do not want to delete Ubuntu! I got scared by that "Delete partition /dev/sda1" thing mentioned above and so I aborted the installation.
What is the installer suggesting? Has it realized that I already have Ubuntu installed and that I want to create a dual-boot system?
I have an Acer Aspire One D150 with the following partition table:
I would like to free up a bit of space from the Win7 partition and install OpenSuse 11.2 KDE alongside my existing OS'es. Trouble is no matter what I do YAST wants to install OpenSuse in / and /home over the top of Ubuntu. It won't let me create any new mountpoints for / and /home. Furthermore, I've heard that even if I can successfully install OpenSuse I will face problems as Ubuntu uses Grub2 and OpenSuse still uses Grub-legacy.
my Windows partition and the future Suse partition will be on different HDDs, so this should ease things a bit. Suse is on HDD 2 and Windows on HDD 1 HDD 2 will be the default Master drive, so I want GRUB to give me to option to boot either on Suse, either on Windows 7 I want to keep Windows 7 boot manager intact. I.E. If I switch HDD 1 to the Master drive, it will boot directly into Win 7.
What I wanted to do is:
Unplugg Windows drive
Install Suse
Replugg Windows drive and manually add the entry to GRUB
if I keep them both plugged, Linux will not touch HDD 1 MBR?
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
I would like to build a sticky subject about repairing openSUSE boot.This article,once complete (not by me alone) should be made sticky (to have it in front of the forum)- these problems are frequent and disturbing.I know the great work done by please-try-again. But very often we don't need any script (and running a script from rescue mode is difficult) - that said I vote to have the pta scripts included in the rescue system !So I would like to focus on command line fixes.
View 6 Replies View RelatedI am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies View RelatedMy Laptop Config is as follows.
Compaq Presario V3700
AMD Turion64
2GB Ram
Windows Partitions
/dev/sda1 == C: (WINDOWS)
/dev/sda2
[Code]...
I have been carrying out updates of both Vista & SuSE whenever i operate in them.
One (Not So) Fine Day, when i Choose from the Grub loader "Microsoft Windows Vista SP2" option it just din't boot into Vista. I have Tried many a time.
My First doubt was towards Vista only, so i choose the "Windows Recovery Mode" option from Grub. It went into the Recovery mode. I ran Memory Tests on Windows Partition, took its own sweet time, whatever missing indexes and all it carried out and finally gave the Thumbs Up result. After that, i carried out Startup Repairs, all came out well. So, Yet again i restarted and tried to get in Vista. Nope, dint work.
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies View RelatedI would like to know if what I am thinking is possible and, if so how to set it up. I have a Compaq Workstation that I have loaded on it VMWare ESX 3.5 and FreeBSD. I have successfully edited the grub menu.lst file to boot into either, but i would like to select my choice from another machine running Win7 using Putty ( Since I only have one monitor and keyboard!
Once my workstation loads the grub, presenting the options of OS's, is there a way using putty or some other software GUI on my Win7 machine to see that grub menu and then select which OS the workstation should boot into? ( ESX 3.5 or FreeBSD - This would come in handy so I dont have to disconnect my monitor, keyboard and mouse each time just to select the desired OS!!!)
That is my disk
Code:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 3724 29912998+ 83 Linux
/dev/sda2 29256 30401 9205245 7 HPFS/NTFS
/dev/sda3 3725 4271 4393777+ 5 Extended
/dev/sda4 * 4272 12104 62918572+ 83 Linux
/dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code:
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$
initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
Right, so I've looked high and low for the answer to this problem and haven't found it, although I've found a million and a half threads about grub especially when it comes to dual booting windows. Which I'm not. What I am though, I suspect, is an idiot who shouldn't mess around with my computer at 4 am.
So the problem is every time I turn on my pc, grub tells me it can't find a file system and goes into recovery mode. Can't boot into ubuntu at all. Am using the live disk to type this.
I also think I know why grub is doing this, I was dual booting windows before, I had windows installed originally, added ubuntu to a new partition. Was having problems with grub. Figured that reinstalling it wouldn't be a bad idea, it might fix it. In that process I did something rather stupid, I accidentally installed grub to my other internal hard drive. There is no operating system on it. Just movies, music, etc. The problem, I think, is that my second hard drive is sda, and the one with my os is sdb, which I suspect means that grub is loading from sda and finding no operating system, rather than from sdb. (It's like that because my larger drive wouldn't fit into the sda slot on my computer, long story.) How do I remove grub from sda?
I am a bit confused about a dual booting system. I Already have windows 7 on my computer and wish to install ubuntu 11.04 but I keep reading about Grub 2. Does grub automatically install with ubuntu or do I need to install it prior to installing ubutu ?
View 10 Replies View RelatedI am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
[code]....
I am trying to Dual-boot Windows & and OpenSUSE 11.4, and have run into walls all over the place. Here is what I did:
1. Windows 7 was already installed. (Don't like it, freezes all the time)
2. Installed OpenSUSE using default partition options.
3. Booted into OpenSUSE with no problem
4. Tried booting into Windows, no joy.
5. Got that figured out, now I can get into Windows.
6. GRUB is gone, so now I can't get back into OpenSUSE.
