I'm trying to update VirtualBox but I'm getting a few problems:
1. When I go into YAST, it doesn't show any other versions available (just 3.0.x)
2. When I download the rpm from the website, I keep getting some insanely long error that says something about NOKEY perhaps? (It's a long error that gets cut off by the screen height)
Trying to start a running installation of virtualbox I get:
And it seems that it doesn't work with the new 275 build I got pushed when updating. Updating virtualbox didn't help. Besides uninstalling the 275 version of nvidia and installing the 270.
I recently applied a bunch of updates to my guest OS (Ubuntu) inside VirtualBox (NOTE: NOT updates to virtual box. Updates to the OS) and now on startup, I get the error:
"An error occurred while mounting /media/share. Press S to skip mounting or M for manual recovery"
I tried a fix which said to comment out the mounting in /etc/fstab and instead put it into rc.local, but this does not work.
Also, when I press "M" to try it manually and type:
mount.vboxsf -w mysharedfolder /media/share
I get the error:
mount.vboxsf: mounting failed with the error: No such device
But before I updated Ubuntu, that shared folder worked perfectly!
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
View 1 Replies View RelatedIn the about last 2 weeks is available an update for VirtualBox OSE, but it fail every time.The final error is "transaction empty" on the gui of the updater.Trying to solve I put the commands suggested by yum (--skip-broken and rpm -Va --nofiles --nodigest) with no luck.
View 4 Replies View Relatedrecently i updated to a kernel version 2.6.31-22-generic and now I cannot start my virtual machines from virtualbox-ose.
View 3 Replies View RelatedJust updated wheezy 2.6.35-2-amd64 from to 2.6.38-2-amd64 and noticed that virtualbox-3.2 stopped working.
View 4 Replies View RelatedI was notified by the updater that VirtualBox-3.2-3.2.10_66523_fedora12-1 (x86_64) was available to install. So I clicked [Install Update] and got the following Transaction error:The GPG keys listed for the "Fedora 12 - x86_64 - VirtualBox" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.
View 2 Replies View RelatedI have virtualbox installed under ubuntu 8.04 x64. The kernel got updated and since then I have to reboot the computer and choose previous kernel to use virtualbox. The reason is that I can't get a hold of the virtualbox module for 2.6.24-28 generic. When the kernel has been updated in the past I would just go into synaptic and select it, but this time it doesn't show and I've waited a while now... Tried searching for the package to no avail.
View 2 Replies View RelatedHave similar issues with Slackware, since the latest Xorg updates I cant run KDE anymore. I am using VBox 3.2.10, so thats not the issue, i suppose.
Here is the error from kdm.log:
Code:
Backtrace:
Fatal server error:
Also when the system is booting I get a warning like this:
Code:
i always run updates if i get prompted about it... this time i ran a couple or so updates and software updates and restarted, i realise my VirtualBox and Wine isn't running at all... i click on the icons but nothing fires up.. all my programs on Wine seem to fall under the same issue...
how do i view all the latest updates i just installed?
On a Xp host I installed last version of VirtualBox and I created a 9.10 Ubuntu 'guest'.While I can surf the net, I cant 'sudo apt-get update' nor do a 'reload' from 'Synaptic Package Manager'.
PS Here are some facts:
<<
Host:
PC:
Thinkcenter 9640-7BG
Network adapters:
[Code]...
Just installed 10.10 under Oracle VM VirtualBox and then installed VBOX additions to clear up monitor issues. Mozilla Firefox works and so does Evolution mail client (needs work though). Everything seems to work EXCEPT Update Manager.I consistently get Failure message: "Failed to download package files".
View 4 Replies View RelatedI have installed both 32 and 64 bit versions of Ubuntu 11.04 in VirtualBox 4.0.6 and have installed the VBox Additions. When I try to add new software or update software I get a package operation failed error.
installArchives() failed: Setting up tzdata (2011g-0ubuntu0.11.04) ...
Use of uninitialized value $reply in scalar chomp at /usr/share/perl5/Debconf/FrontEnd/Passthrough.pm line 66.[code]....
I have used the same install media to install Ubuntu on a stand alone system and it works fine.
I use Arch Linux and the kernel got upgraded, and it broke VirtualBox. It says to run "/etc/init.d/vboxdrv setup", but such a file does not exist. The Arch Wiki says "/etc/rc.d/rc.vboxdrv setup", but that doesn't exist either. What should I do?
And is it possible to write a script that runs on startup that automatically fixes VirtualBox whenever the kernel is upgraded?
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
I am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View Relatedmy error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I have been going through forums and following "how to's" and walkthroughs on how to use VirtualBox to run my Win 7 VM. I have a pre-created VHD that I am importing to my OpenSuse 11.4 machine. One vhd was created in Hyper-V and has hardware and cpu cross compatibility turned on. Everything works perfect when booting it up on my Hyper-V server. When I move it over to my OpenSuse VirtualBox the VM will not boot. It gets to the "Starting Windows" screen and then throws an error screen that the VM encountered errors while booting. It then runs the Window's startup recovery tool and even tried to do a system restore. Nothing works and it never progresses beyond that point. Figuring there was something with the vhd file. I used Acronis Advanced Backup and Recovery to create a non hardware dependent backup that was automatically converted to a vhd. I know the process works as that is how I have converted the bulk of the servers at work into VM's. However, when I move the vhd file to the OpenSuse VirtualBox... it does the same thing.
So I am trying to figure out what might be going on here. Is VirtualBox not able to virtualize Win 7? If not then what VM software should I use? VMWare, Xen, ???
If I run Vista through VirtualBoxOSE (on Natty) will I be able to update my MS Zune? Short replies welcome, just want to know if it's worth the trouble
View 2 Replies View RelatedA long time I used the Virtualization:VirtualBox-Repository (which is still suggested in the yast-repository-module) to get the latest version, but the version 3.1.6 is still missing here.I found that this repository will be dropped and instead Virtualization:VirtualBox_backports should be used.But the packages there have two problems:No localization is available, you can just use english.The kernel-modules are just available for Kernel 2.6.31.5 (there is no update-repo for updated kernels)
View 7 Replies View RelatedI tried upgrading today from VirtualBox 3.1 to 3.2 (VirtualBox-3.2-3.2.0_61806_openSUSE111-1.x86_64.rpm) on my openSUSE 11.2 system and it's not cooperating. The installation itself went fine, but as soon as I try to start a guest, the VirtualBox process ramps up to 100% and stays there until I poweroff the guest. The guest itself is VERY slow. These guests worked fine on 3.1.
For example, if I start an openSUSE guest and stop the Grub counter, therefore leaving the screen at the Grub bootloader, the VirtualBox process remains at 100% forever, without any activity on the guest.I also have a Windows guest and it has the same problem.
I can obviously try downgrading again to 3.1, but I was hoping that someone else has run into this issue and knows what to do about it.
I currently have vbox 2.0.6 OSE and its been running awesome except I get errors with directx when running 3D apps cause of the video card driver that comes with vbox(at least so far thats I narrowed it down to). So, Im trying to update to 3.2.2 but cant seem to find an easy way to do it. I downloaded the RPM for OpenSUSE 11.1 from Sun's website and when installing it I got errors about files conflicting with the previous version. So I ran a "zypper rm vbox" to remove the current one and then ran the RPM again and it seemed to finish the installation fine, I just cant find it to run it.I currently have the 2.0.6 version installed again just so I can use it... but now am back to trying to get 3.2 installed before looking in another direction.
View 5 Replies View RelatedSo after a series of uninstalling and reinstalling VirtualBox to get the updated version, I was able to get it installed and working but it seemed to be crashing my computer as everytime i walked away for 10 minutes and came back, it would be at the login screen. It never did it while I was on it though so I never saw any errors. Now after a couple days of that... Whenever I start it I get an error:
Failed to create VirtualBox COM object
The application will now terminate.
Could not load the settings file '/home/user/.VirtualBox/VirtualBox.xml'
[code]....
Earlier i installed Virtualbox from Package Repository. Now VB Repository doesn't work anymore. I only get en error-msg if i try to ad VB in Package Repository. I've been always adviced to install from repos than downloading. What happens with Virtualbox?
View 5 Replies View RelatedSo, on OpenSuse 11.3 I installed VirtualBox, and I would like to put other account to be able to start virtual os-es, but... I would like to have them 2-3 and that other users see them when they start VirtualBox and that they can start them, but not to add new one..
View 9 Replies View RelatedI've been having problem after problem trying to install virtualbox 4.0.2, on 32 bit opensuse 11.3. I've been able to jump over a few hurdles by installing the kernel source. But now I get this error when starting virtualbox from the command line:
Code:
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (2.6.34-12-default) or it failed to
[code]....
i have virtualbox installed from the oracle virtualbox repositorie and had trouble with running virtual machines. It was a permission error: VERR_SUPLIB_OWNER_NOT_ROOT
Turns out after some searching that the permission had changed on /usr to
owner:chris and group:vboxusers. Directories inside /usr still belonged to the user root and the group root.
I don't know how much of a security issue this is, but i wanted it to let
you all know just in case it is. I changed /usr again to root:root and all is well again.
