OpenSUSE :: VirtualBox 3.2 Hogs CPU At 100%?
May 26, 2010
I tried upgrading today from VirtualBox 3.1 to 3.2 (VirtualBox-3.2-3.2.0_61806_openSUSE111-1.x86_64.rpm) on my openSUSE 11.2 system and it's not cooperating. The installation itself went fine, but as soon as I try to start a guest, the VirtualBox process ramps up to 100% and stays there until I poweroff the guest. The guest itself is VERY slow. These guests worked fine on 3.1.
For example, if I start an openSUSE guest and stop the Grub counter, therefore leaving the screen at the Grub bootloader, the VirtualBox process remains at 100% forever, without any activity on the guest.I also have a Windows guest and it has the same problem.
I can obviously try downgrading again to 3.1, but I was hoping that someone else has run into this issue and knows what to do about it.
View 2 Replies
ADVERTISEMENT
Mar 29, 2011
My configuration is OpenSuSE 11.4/KDE4/32bit. I am noticing that for about 20 minutes (or more) after first login every time there is a process which takes 100% CPU for most of the time and, of course, slows everything down. The system monitor suggests it is the 'tracker-miner' process (whatever that is). Do I need the tracker-miner? What good does it do? Is there any way to stop it (not to start it)?
View 2 Replies
View Related
Mar 7, 2011
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
View 1 Replies
View Related
Aug 6, 2011
Don't know how to report to bugzilla, but first of all I want to know if it's only my PC or if you have this problem too. Today I started copy a 1.4 GByte from an internal disk (NTFS formatted) to a USB stick. The process is extremely slow (but this isn't a news, it always was with previous Fedora versions), in the meanwhile I tried to start Firefox and I found that it doesn't start: from KDE system monitor I see that Firefox starts loading but it blocks in "waiting for disk". Tried with some other program (Ksnapshot, Filezilla) and they're also extremely slow in loading when copy is active. When putting the copy process in pause, after some time programs starts opening.
View 5 Replies
View Related
Nov 25, 2010
I dual boot windows and ubuntu, and fount it very nice. But when i run flash game at my chrome, i can see the CPU usage increase a lot. When it reaches max, the flash game will be 'flashing' and lag. I use latest stable google chrome and flash player. Any idea how to fix this? I encounter no problem when playing at Windows.
Spec:
Dell Inspiron 1427
Core2Duo T6400
Nvidia Geforce 9300m gs
4GB RAM
32 bit ubuntu maverick 10.10
View 4 Replies
View Related
May 17, 2010
I am trying to solve one problem: When i run my process in background it hogs around 96% of CPU. But when ran in foreground, CPU utilization is almost zero. Is there any difference b/n a background and a foreground process wrto CPU utilization?
View 8 Replies
View Related
Sep 22, 2010
Freshly installed and updated Ubuntu 10, the first thing I did was install Wine and the second was installed Steam under Wine. Steam will run, but the moment it opens, xorg's CPU usage jumps to around 70% and stays there. Graphics card is an old ATI Radeon 9600 pro.
View 3 Replies
View Related
Oct 6, 2010
I'll often run iceweasel for watching videos via flash (hulu, ....., et cetera) while working, in fedora I never noticed any performance problems, watching the video while using chrome for browsing, gedit for editing, et cetera, everything was responsive. Though, now on debian running iceweasel for the same purpose hogs memory and processor time, which slows down the responsiveness of the system as a whole, making it difficult to use other programs.I'm curious how I should go about troubleshooting this issue, and what diagnostics might help me find the solution.
View 4 Replies
View Related
Mar 23, 2011
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
View 5 Replies
View Related
Apr 27, 2010
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
View 6 Replies
View Related
Aug 10, 2011
I have been going through forums and following "how to's" and walkthroughs on how to use VirtualBox to run my Win 7 VM. I have a pre-created VHD that I am importing to my OpenSuse 11.4 machine. One vhd was created in Hyper-V and has hardware and cpu cross compatibility turned on. Everything works perfect when booting it up on my Hyper-V server. When I move it over to my OpenSuse VirtualBox the VM will not boot. It gets to the "Starting Windows" screen and then throws an error screen that the VM encountered errors while booting. It then runs the Window's startup recovery tool and even tried to do a system restore. Nothing works and it never progresses beyond that point. Figuring there was something with the vhd file. I used Acronis Advanced Backup and Recovery to create a non hardware dependent backup that was automatically converted to a vhd. I know the process works as that is how I have converted the bulk of the servers at work into VM's. However, when I move the vhd file to the OpenSuse VirtualBox... it does the same thing.
So I am trying to figure out what might be going on here. Is VirtualBox not able to virtualize Win 7? If not then what VM software should I use? VMWare, Xen, ???
View 7 Replies
View Related
Apr 26, 2010
A long time I used the Virtualization:VirtualBox-Repository (which is still suggested in the yast-repository-module) to get the latest version, but the version 3.1.6 is still missing here.I found that this repository will be dropped and instead Virtualization:VirtualBox_backports should be used.But the packages there have two problems:No localization is available, you can just use english.The kernel-modules are just available for Kernel 2.6.31.5 (there is no update-repo for updated kernels)
View 7 Replies
View Related
May 27, 2010
I'm trying to update VirtualBox but I'm getting a few problems:
1. When I go into YAST, it doesn't show any other versions available (just 3.0.x)
2. When I download the rpm from the website, I keep getting some insanely long error that says something about NOKEY perhaps? (It's a long error that gets cut off by the screen height)
View 6 Replies
View Related
Jun 6, 2010
I currently have vbox 2.0.6 OSE and its been running awesome except I get errors with directx when running 3D apps cause of the video card driver that comes with vbox(at least so far thats I narrowed it down to). So, Im trying to update to 3.2.2 but cant seem to find an easy way to do it. I downloaded the RPM for OpenSUSE 11.1 from Sun's website and when installing it I got errors about files conflicting with the previous version. So I ran a "zypper rm vbox" to remove the current one and then ran the RPM again and it seemed to finish the installation fine, I just cant find it to run it.I currently have the 2.0.6 version installed again just so I can use it... but now am back to trying to get 3.2 installed before looking in another direction.
View 5 Replies
View Related
Jul 28, 2010
So after a series of uninstalling and reinstalling VirtualBox to get the updated version, I was able to get it installed and working but it seemed to be crashing my computer as everytime i walked away for 10 minutes and came back, it would be at the login screen. It never did it while I was on it though so I never saw any errors. Now after a couple days of that... Whenever I start it I get an error:
Failed to create VirtualBox COM object
The application will now terminate.
Could not load the settings file '/home/user/.VirtualBox/VirtualBox.xml'
[code]....
View 6 Replies
View Related
Oct 28, 2010
Earlier i installed Virtualbox from Package Repository. Now VB Repository doesn't work anymore. I only get en error-msg if i try to ad VB in Package Repository. I've been always adviced to install from repos than downloading. What happens with Virtualbox?
View 5 Replies
View Related
Dec 2, 2010
So, on OpenSuse 11.3 I installed VirtualBox, and I would like to put other account to be able to start virtual os-es, but... I would like to have them 2-3 and that other users see them when they start VirtualBox and that they can start them, but not to add new one..
View 9 Replies
View Related
Jan 26, 2011
I've been having problem after problem trying to install virtualbox 4.0.2, on 32 bit opensuse 11.3. I've been able to jump over a few hurdles by installing the kernel source. But now I get this error when starting virtualbox from the command line:
Code:
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (2.6.34-12-default) or it failed to
[code]....
View 1 Replies
View Related
Feb 26, 2011
i have virtualbox installed from the oracle virtualbox repositorie and had trouble with running virtual machines. It was a permission error: VERR_SUPLIB_OWNER_NOT_ROOT
Turns out after some searching that the permission had changed on /usr to
owner:chris and group:vboxusers. Directories inside /usr still belonged to the user root and the group root.
I don't know how much of a security issue this is, but i wanted it to let
you all know just in case it is. I changed /usr again to root:root and all is well again.
View 8 Replies
View Related
Mar 31, 2011
I have previously been using VirtualBox on an Ubuntu installation, but have now switched to openSUSE 11.4. I have a .vdi file that I want to continue using and would like to know if it is possible to import this to the (preferred?) hypervisor which appears in the openSUSE System menu, which I assume is XEN.
Never having used XEN,
View 2 Replies
View Related
Mar 14, 2009
I am using opensuse 11.1.I have installed virtualbox in my machine.The problem is that when i am running it doesn't open.Do you know why it doesn't work?
View 9 Replies
View Related
Dec 9, 2009
Host is x64 openSUSE 11.2
guest is winxp pro
VirtualBox ver 3.0.12
The install and setup of VirtualBox is good and working.
I'm having a perplexing issue with usb devices. I have three usb devices connected to my system - apc battery, sd carder, and a Logitech joystick. All devices work on the host. I can connect the apc and the card reader to the guest and they work perfectly. But not the Logitech joystick. I get this error, same as I've seen in some other threads:
Failed to attach the USB device Logitech Force 3D Pro [0600] to the virtual machine winxp1. Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)
under "details" is this:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {0a51994b-cbc6-4686-94eb-d4e4023280e2}
When I installed I modified my fstb:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part1 / ext4 noatime,acl,user_xattr 1 1
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part2 /home
[Code]....
View 1 Replies
View Related
Jan 21, 2010
I installed VirtualBox, and I want to install Vista on it. I just have the copy of vista that came with my computer. I made the back up disks for it, and tried to use them to install it in the virtual box, but it said it was unable to install in that machine.
After that I looked in my windows partition and found the product ID for the vista copy. My question is: Can I download a copy of Vista and then use the product ID of my copy to make the installation in the VirtualBox? Are there any technical or legal reasons not to do this?
View 9 Replies
View Related
Mar 11, 2010
VirtualBox is successfully installed on my openSUSE 11.2 and the guest OS is Win XP. I am looking for a way to acomplish two things from the guest OS:-use USB -use internet connection
On the first one, I've run into a howto for openSUSE 11.2 that says usb access for guest OSes in VBox is supported only in the binary (non-free) version. Since I am running the free one, does that mean I am out of luck on usb matter?
On the second one, I am puzzled as well. WinXP image is already installed and I tried to configure its networking via the "settings" section in VBox which gives me several options out of which none is for setting up IP's. How do I get internet connection that openSUSE host already has to share it with the guest OS within VBox?
View 9 Replies
View Related
Jul 4, 2010
I am running puppy linux in VB, I cant access shared folders.
View 3 Replies
View Related
Jul 27, 2010
I have a few VMs set up with virtualbox but am finding that I'm now running out of space in some of the VMs. I really don't fancy creating new VMs and reinstalling and configuring them so is there an easy way to increase the size of the virtual disks?
View 9 Replies
View Related
Aug 25, 2010
I'm trying to set up Virtualbox to run as a service so that it auto starts the VM when the PC boots and shuts down the VM when the PC is shut down.
I've found a set of scripts that do this but set up of the scripts was written for Ubuntu so I'm stuck at one of the steps.
The set of scripts can be found HERE
The part of the install that I'm not sure about is the part in bold. I know what it's trying to do (basically start the script last during the boot process and stop the script first during shutdown) but don't know how to do it in oS.
VBoxTool currently consist only of a set of scripts. With this scripts, virtual machines of VirtualBox in a Linux headless server can be controlled. Start, stop, save, backup and show status of sessions in batch mode from the command line.
Usage and installation is tested only on Ubuntu. Please report if a specific function is not working in another environment, say OpenSUSE, Fedora, etc.
INSTALLATION:
View 3 Replies
View Related
Sep 20, 2010
I've install virtualbox and got it working.In KDE, the normal Alt-F2 -> virtualbox will start virtualbox. However, when I login to openbox or fluxbox, I am unable to get virtualbox started.Curious, re-login into KDE and virtualbox can be started as normal.However, in konsole, when I try to locate virtualbox, I am unable to locate it.Any idea how to locate and start virtualbox in fluxbox, openbox?
View 4 Replies
View Related
Mar 11, 2011
I have VirtualBox 4.0.0 running on open SuSE 11.3 64bit. It works well. My connection to the internet is via a Pantech UML290 usb modem. I can select the usb device and use the Verizon Access Manager to connect to the internet. It says it is connected, but there doesn't seem to be a real connection. I can't hit any web sites with my browser. How can I get this working? I have also tried connecting via Linux then from within VB selecting the usb device, but that just disconnects the modem in the process.
View 6 Replies
View Related
May 23, 2011
I started with a bootable Windows 7 Upgrade DVD. I tested the DVD by booting from DVD in a physical drive. The system put up a "press any key to install from CD/DVD" and it worked. Now, I attempted to make a bootable ISO for VirtualBox... To make the ISO, I used this:
dd if=/dev/sr0 of=windows7.iso bs=2048 conv=sync
which I've read will clone the DVD and its boot ability? Is this correct? When I start VirtualBox, version 4.0.8 r71778, I get the "FATAL: No bootable medium found! System halted." The IDE Primary Master (CD/DVD) is set to see windows7.iso, so I suspect it sees the ISO, only it doesn't appear to be bootable. SATA Port 0 is set to Windows 7.vdi. Am I missing a step somewhere? The system is running openSUSE 11.4.
View 9 Replies
View Related
