I use Arch Linux and the kernel got upgraded, and it broke VirtualBox. It says to run "/etc/init.d/vboxdrv setup", but such a file does not exist. The Arch Wiki says "/etc/rc.d/rc.vboxdrv setup", but that doesn't exist either. What should I do?
And is it possible to write a script that runs on startup that automatically fixes VirtualBox whenever the kernel is upgraded?
Can anyone explain why a 64 bit kernel builds a bzImage in both arch/x86 and arch/x86_64- is there a difference between the two?
View 2 Replies View RelatedI'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View RelatedSo I know I should have known better then to turn my updates back on after the 15 and 16 kernel updates crashed ubuntu and grub but I did anyway and once again after a new kernel gets installed I'm stuck at the grub sh prompt.
Been down the road before... tried using
linux /boot/vml....... root=/dev/sda1 loop=/ubuntu/disks/root.disk ro
When I use the 16 or 17 kernel I get an error stating "invalid imaginary number"...
So I use the 14 kernal and enter
initrd /boot/initrd.....
boot
And it boots like it did the last time this crashed. I went to the terminal and entered
sudo apt-get install grub 2
sudo update-grub2
And then rebooted like I did last time expecting the problem to be fixed and at least be able to boot up the 14-generic. It didn't fixed this time. So now what do I do to fix grub and what do I do about having 2 unbootable kernals??
After updating to version 2.6.31-20-generic, my desktop computer with an ATi HD4850 graphics card, using the fglrx driver, now won't boot to X. It goes through the boot process and displays the splash screen, but after that there is nothing on the screen. Choosing an older kernel version from GRUB doesn't make a difference. I don't even know how to diagnose the problem properly. I can boot into recovery mode and get to the command line, however, starting x from there only leaves me with a blank screen.
so the source of the problem is that I had installed the catalyst driver from amd.com, which needs to be reinstalled with every kernel update. I didn't know this in advance, so now I'd like a way to revert back to fglrx from the repos. Sadly, the community docs only seem to cover the graphical way of doing this, which is kind of useless to me at the moment.The ATi driver docs gave me a way to uninstall the catalyst driver using only the command line. So now I've booted back into Ubuntu and selected to install the fglrx driver from System → Hardware Drivers. However, now when I boot up, I get the message: "(EE) Unable to initialize PCS database
After i updated to the kernel version 2.6.34.7-61.fc13.x86_64 my wireless stopped working!
My network card is a Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
The interface is not listet anymore under ifconfig, under the network icon i see only wired networks.
If i boot using the old kernel (2.6.34.7-56.fc13.x86_64) everything is fine.
when i run lshw -C network i can see that the driver is not loaded correctly
Code:
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
[Code]....
Ubuntu 10.10 latest kernel 2.6.35-28.49 update is broken. update just stalls when it gets to this.Quote:
Sub-process /usr/bin/dpkg returned an error code (1)...generating grub.cfg I have tried the following to no avail..Quote: sudo apt-get install -f sudo dpkg --configure -a sudo apt-get update && sudo apt-get upgrade
I have not changed any hardware.
I am currently working to get to a stable dual boot Win7/CentOS 5.5 configuration on a Dell Latitude E6510 with the Intel 82577LM chipset. I haven't gotten the Centrino N WiFI chipset working yet, but the Eth0 device was working just fine.However, yesterday I did a system update. I did not pay close attention, but I believe the update did mention networking, because I thought it might help me get my wireless going. Now, Eth0 fails with the message, "Determining IP information for eth0... failed; no link present. Check cable?" It does this at boot up and if we try reactivating it once the system is up. We have tried unstalling and re-installing the driver.The Window 7 boot sees the adapter and runs just fine. I was at a different site location yesterday when everything was working, but my co-workers and I can't help but think it might be related to the update yesterday, since everything worked prior to the update and Windoze 7 works fine with the adapter.
I have not been able to mount my NTFS harddrive on the CentOS side, despite installing fuse, and I don't have wireless, which makes it difficult to get access to new drivers. I also have a FAT32 partition that would be great to share between the boots for passing info, but I haven't found a way to mount a FAT32 partition in CentOS.
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
The kernel-PAE-2.6.30.5-43 upgrade will not boot on my Dell 1545 notebook. The initialization stops and the systems freezes right at the point that the login prompt should appear. I do not have invidia drivers. I have Intel video drivers. Also there is a loud 'pop' in the sound system early in the initialization sequence. For the time being, I have removed the 2.6.30.5-43 upgrade via yum.
View 8 Replies View RelatedI was doing a kernel update and can no longer boot into 11.3. I am dual booting with XP. I get Grub screen but no longer see Suse as a boot option, only Windows. I have tried to reinstall, but for some reason I can't get it to boot with DVD. So, is there a way that I can repair my computer without doing a reinstall?
View 9 Replies View RelatedI just upgraded the kernel on my Ubuntu laptop from 2.6.32-24-generic to 2.6.32-25-generic (using the update manager under gnome). After the update, the wireless network controller shows up as UNCLAIMED when I do lshw -C network.When I try to install the driver with the commands sudo modprobe lib80211 sudo insmod wl.ko
i get this error message: insmod: error inserting 'wl.ko': -1 Invalid module format
I have compiled the driver using the 2.6.32-24 kernel. Do I have to re-compile with the new kernel?I'm a unix user, but not a kernel hacker, so I'm wondering if I will run into problems every time I get a kernel update? Or is this problem an exception?
I have recompiled a few kernels, but all on 32bit systems so not sure if that has anything to do with it.
Running Arch Linux 64bit, most recent version.
Kernel Output:
Code:
My first thoughts was that it might be my grub bootloader configuration, so had a big play around with that but it didn't fix it. Also made sure support was built for filesystems. However almost all that Fstab mounts are ext3 anyway, and certainly the root and /boot are. Now thinking it may be a memory error so will run a check when I shutdown.
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
My Arch Linux can't update for over a few weeks now! It just says that everything is up to date and quits. But I hardly believe there weren't any updates, before there were a few updates a day!
View 3 Replies View RelatedI'm building a Kernel on System A to use on System B. I've followed the walkthrough on [URL], and I get the following rpms:
kernel-debuginfo-common-i686-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-firmware-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-debuginfo-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-devel-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-debuginfo-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-devel-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
What I don't get are any
kernel-headers-<version>.<arch>.rpm
Files. Don't I need them to rebuild modules and drivers on System B? Otherwise, how should I copy my new headers to System B? BTW, System B crashes when I try to build the Kernel on it, that's why I'm building debugger Kernels on System A.
I'm trying to install the "kernel26-headers" package in Arch so I can (try to) compile the Intel 865G graphics drivers from off their website (I can't get H/W acceleration working with xf86-video-intel, but I know the thing has a GPU, because if I boot a Knoppix CD that I have, it enables Compiz by default, and it works damn well).
Any time I try "pacman -S kernel26-headers" I just get a bunch of errors spat back at me code...
Now, I have tried enabling all the US mirrors (HTTP and FTP), and I have even tried a couple of FTP servers in Canada and even Great Britain. None of them seem to work at all!
Is there any way I can get this package?
I'm learning about the system calls in Linux, but I was not able to find the syscall_table.S file in the linux/arch/x86/ directory. Are the sources installed by default in Lenny ? Or do we've to install them manually.
[12:12 PM:/usr/src/linux/arch/x86/kernel]$ ls
asm-offsets.s Makefile
These are the only files in the specified directory. I'm using the stock kernel.
[12:12 PM:/usr/src/linux/arch/x86/kernel]$ uname -r
2.6.26-2-686
Since new kernel 3.0 update I cannot rebuild vmware modules
Quote:
sudo vmware-modconfig --console --install-all Unable to initialize kernel module configuration
how to do that. Where do I insert the "CONFIG_LOCALVERSION" line.
Quote:
Same here. This seems to be due to the kernel version being "3.0" instead of "3.0.0". Recompiling the Kernel (and all modules based on it, e.g. nvidia) with
CONFIG_LOCALVERSION=".0-ARCH" allows me to compile the modules and run VMware.
's/ARCHTYPE=i386/ARCHTYPE=x86/'If your looking for a kernel image in /usr/src/linux/arch/i386/boot, your not likely to find one.
View 3 Replies View RelatedI've recently upgraded Arch kernel on my laptop to 2.6.38.4 and after reboot I found out that eth0 is missing in ifconfig -a (it only showed lo and wlan0). The same issue is in 2.6.38.5 that came out just couple of days ago. Any idea what can be causing this? What info should I add?
Output of lspci:
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
I just did the pacman -Syu command today since i have had limited access to internet i could use with arch lately, (been tethering via droid which is only compatible in ubuntu) The command line works fine, i even reinstalled X to see if that was the problem,whenever i do startx it loads up for a second but before my xfce screen even pops up the screen blinks and blackens.
View 7 Replies View RelatedI'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
I started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies View RelatedSetup:
1. Microsoft Windows 7 64-bit Professional HOST Operating System
2. Oracle VirtualBox 4.0.6r71416 on top of Windows 7
3. Ubuntu 10.04 Lucid Lynx 32-bit GUEST Operating System in VirtualBox
I successfully installed the above configuration on May 15, 2011. I had some difficulty getting the Host-Only VirtualBox Adapter to work. I was forced to make a subtle change to the Windows Registry in order to get the Adapter to work correctly. I was successful. I used the Debian Update Manager to update my installation of Ubuntu. Nothing changed on the Windows 7 side. Now, Windows 7 says that the Host-only adapter is enabled, but I don't have a connection to the Ubuntu OS. I can't use PuTTY or WinSCP. When I invoke ipconfig on the Windows side, 192.168.56.101 is the IPv4 address. When I invoke ifconfig on the Ubuntu side, there isn't anything.
im on mint 10 and when I run Update Manager i get this
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://security.ubuntu.com maverick-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
[code]....