General :: Fstab Line For Auto Mount Drive That All Users Can Read/write?
Jan 4, 2011
I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection.I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives.I have created the directory /archive/ where I would like the drive(s) to mount.The drives are all formatted Fat 32 - but in the future I may use HFS for formatting.When I used the command (as root):mount /dev/sdc1 /archivethe drive was mounted (but read only)What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing)Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives?
View 2 Replies
ADVERTISEMENT
Oct 7, 2010
I try
mount -t ntfs -o rw /dev/sdb1 /mnt/exthdd
it doesn't give me any response so I presume it succeeded but when I try to touch it, it tells me it's a read-only file system
View 1 Replies
View Related
Apr 6, 2010
After installing the "fuse" and "fuse-ntfs-3g" packages, my ntfs formatted thumb drive mounts read only, as follows:# mount.../dev/sdb1 on /media/disk type fuseblk (rw,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096)
View 17 Replies
View Related
Feb 23, 2010
I'm trying to get fstab to auto-mount a removable device when its plugged in? Is this possible and if not what is the easiest way to auto-mount a removable device?
View 3 Replies
View Related
Jun 4, 2010
I have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount Read Only ext4 partition from Opensuse in /etc/fstab under Ubuntu?
View 3 Replies
View Related
Feb 15, 2010
How make, that disc be able to read and write data for all users? I have Ubuntu 9.
View 2 Replies
View Related
Jul 8, 2010
I own a particular file on a Linux system. I would like to give 2 groups (accounting, shipping) read access and only read access, and 3 users(Mike, Raj and Wally) write access and only write access. How can I accomplish this?
View 3 Replies
View Related
Mar 18, 2010
I need to allow non-root users to read/write on an ext3 partition.
Below is the relevant output from fdisk -l
Code:
The partition in question is /dev/sda4 and it is mounted as /Data (setup during installation).
View 2 Replies
View Related
Oct 6, 2010
I'm currently setting up a laptop for my grandparents to use. They have never used a computer before, so I'm trying to make this as fool-proof as possible. The system will be setup with Ubuntu 10.10. In order to save them the hassle of having to unmount USB drives before disconnecting them, I would like to have all USB drives auto-mounted as read-only (possible use cases for now only include them getting data from people, not them copying anything to the drive). I have so far found that gnome-volume-manager is responsible for the handy auto-mount, but I didn't find any way to set options, like always mounting drives read-only.
View 1 Replies
View Related
Jul 24, 2009
Anybody know how to make an ext3 or 4 partition start up at boot with only the owner and its group having read and write access permissions.I don't want 'others' to have folder access. This is what i have done. / etc/fstab:/dev/sdb5/media/Data ext4 owner 1 2 The folder starts on the boot since it has been allocated a folder as u can see. Next i changed the the ownership and the group ownership of the folder:chown johnny:johnny /media/DataThe problem is that other users can few my partition since 'others' have read access. How do i change that to zero access?
View 1 Replies
View Related
Jan 25, 2011
I am using CentOS 5.5 OS. I already install ntfs-3g rpm, but I don't know the command to mount network NTFS drive. I also want to mount it on my fstab file, so whenever it reloads, it can automatically mount on the specific folder.
View 9 Replies
View Related
Nov 9, 2010
I tried to mount my CD Rom drive and got this response: "mount: can't find cdrom in /etc/fstab or /etc/mtab"
I did see the CD Rom drive briefly after I upgraded from 10.04 to 10.10 but I couldn't access the drive and when I logged back in.
View 5 Replies
View Related
Jan 14, 2011
I have a Windows partition encrypted with TrueCrypt. If I start TrueCrypt (or RealCrypt) I can mount the partition through the GUI. before I encrypted the partition I used to auto-mount it at boot using fstab and it would appear in my places bar in the file managers. Is it possible to auto-mount truecrypt partitions from fstab?
View 2 Replies
View Related
Feb 8, 2011
How do i disable the linux file cache on a xfs partition (both read an write).
We have a xfs partition over a hardware RAID that stores our RAW HD Video. Most of the shoots are 50-300gb each so the linux cache has a hit-rate of 0.001%.
I have tryed the sync option but it still fills up the cache when copinging the files. ( about 30x over per shoot :P )
/etc/fstab:
/dev/sdb1 /video xfs sync,noatime,nodiratime,logbufs=8 0 1
Im running debian lenny if it helps.
View 2 Replies
View Related
Dec 17, 2009
I can mount the NTFS in read only mode, but i need write access too. how can i mount NTFS partition in read/write mode..?
View 12 Replies
View Related
Mar 20, 2010
how do i give group write permissions in fstab? i'm trying to mount a virtualbox shared folder. currently my fstab looks like this Code: Share_Name /mnt/point vboxsf rw,uid=1000,gid=1000 0 0 i want to give both the owner and group, write permissions. currently, only the owner has write permissions, and group read with these mount options.
View 3 Replies
View Related
Feb 6, 2010
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
View 3 Replies
View Related
May 20, 2011
i want to mount NTFS by normal users so i used the following entry in fstab /dev/sda6 /media/Mostafa ntfs-3g noauto,exec,rw,user 0 0 however when i try to mount the partition i get the following error Unable to mount Mostafa
Error mounting: mount exited with exit code 1: helper failed with:
Error opening '/dev/sda6': Permission denied
Failed to mount '/dev/sda6': Permission denied
Please check '/dev/sda6' and the ntfs-3g binary permissions,
and the mounting user ID. More explanation is provided at
NTFS-3G Questions at Tuxera
[Code]...
View 6 Replies
View Related
Oct 6, 2010
I want to simply mount an ext4 file-system onto a normal mount point in Ubuntu (/media/whereever), as read-writable for the current logged-in user, i.e. me.
I don't want to add anything into /etc/fstab, I just want to do it now, manually. I need super-user privileges to mount a device, but then only root can read-write that mount. I've tried various of the mount options, added it into fstab, but with no luck.
View 3 Replies
View Related
Jul 16, 2010
i'm working with x86 small computer having 128 ram and 233MHz speed in processor nd i'm going to do a project which need auto mounting of a pen drive if you can post a url that I can download those OS.
View 5 Replies
View Related
Jul 29, 2010
I'm trying to add a line to fstab to mount a share on every boot. I can mount the share manually using
sudo mount -t nfs 192.168.2.1:/x_machine /mnt/test
I've added the line
192.168.2.1:/x_machine /mnt/test nfs rw,hard,intr 0 0
to my /etc/fstab file, but it doesn't seem to mount on boot. What am I missing. I tried looking in the log files for an error, but couldn't find anything. Ubuntu 10.04 x64 desktop edition.
View 7 Replies
View Related
Dec 13, 2010
I am developing a program that uses libusb-1.0 on a FC14 x64 system. I solved the compile and link issues, but I now have a problem with user privileges when I try to get device handles. The problem appears to be in the mounting of the usbfs. Is the an accepted fix to giving users read/write privileges for all usb devices?
View 4 Replies
View Related
Nov 28, 2010
I have shared two external harddrives via samba on ubuntu, but only I can access it. The reason being is because I have logged into linux, and become the owner of the external hdd's. On the permission properties, I can see that the group I have created every other user under has "No Folder Access", and if I change this it reverts back instantly. So frustrating, I've tried to chmod it which hasn't done a thing. The owner of the external hdd's seems to be the only person who can access it over samba.Is there anyway I can get normal users to just read and write to external hdd's?
View 9 Replies
View Related
Nov 13, 2009
I upgraded Ubuntu 9.04 to 9.10 desktop a few weeks ago and an external USB drive that was mounting at startup on 9.04 is no longer mounting on 9.10. If I unplug the USB cable and plug it back in it comes up. The issue is strange in that when a regular non-admin logs in the drive auto mounts but does not for an admin login. I have not been able to put together search results that would lead me to a hint of why this would occur and/or what aresolution may be.Why would the drive auto mount when a regular user logs in but not auto mount for an admin? When I say admin I guess what I mean is a user with more privileges such as member of the admin group.
View 2 Replies
View Related
Sep 4, 2009
Our office just switched from CentOs to Fedora and I'm trying to get everything set up. Everything is working so farbut im having a problem with my mounted cifs drives. They mount ok, I made directories in /mnt where the drives are readable and accessible. I'm only missing the shortcuts to the mounted drives in nautilus and on the desktop. I've checked the gconf editor and the volumes should be visible.Is there an extra option i have to add in the fstab line to get the shortcuts or something like that?
View 2 Replies
View Related
Jan 9, 2010
According to a couple of different places, it's not possible for me to put a line in /etc/fstab to mount one of my partitions with owner and group not root; instead, I have to mount it in /etc/fstab, then chown & chgrp to my user. That seems ridiculously tedious and silly... is it true? I'm sure a short script could be written to get around it, but it seems obtuse for Linux not to allow that to be set in /etc/fstab.
View 9 Replies
View Related
Jan 8, 2011
I recently formatted my memory stick in windows. It works properly in windows. I have a dual boot with ubuntu 10.04 and the usb automounts in read-only mode. I cannot write anything to the usb stick in ubuntu. sudo chomod does not work.
View 4 Replies
View Related
Jun 19, 2011
I've been reading for a while about samba but I haven't found a solution to my problem yet.I'd like to know if, the configuration I have in mind, is possible at all ("security = user" is what I'm using now).I want a directory to be:
1) read only for guests and some UNIX users;
2) write for some other UNIX users.
The advantage of this configuration would be that every single user in my LAN (with or without a UNIX account) would be able to read the content of the shared directory Music and I (UNIX user andrea) could manage the folder directly trough samba preserving the correct owner/group and permissions on the new files/folder created.
Notes about my configuration above:
1) as it is now every user gets authenticated by samba as nobody so even I (andrea) cannot write in it;
2) commenting out the line "guest ok = yes" I can authenticate as "andrea" and write in it but guest access is not possible any longer.
View 6 Replies
View Related
Jan 12, 2010
I would like to mount a (permanently) attached external USB drive so that it is writable by multiple userids. Currently HAL is mounting the drive as writable to my owner user and readable for group and others. My m/c also runs as an FTP server and I would like said FTP server to be able to write files to the external drive. Just being able to specify a gid would probably do the job for me.
I have googled HAL and UDEV and also attempted to configure usbmount to do this, all to no avail. I am running SLES 10.3. So in summary, can I & how do I either make HAL mount the drive with gid=nnn, or should I not use HAL and simply make an entry in /etc/fstab and make sure a I get the same device address for this USB drive each time I boot?
View 4 Replies
View Related
Sep 19, 2010
My 10.04 64-bit desktop has been auto-mounting USB devices (flash drives and my mp3 player) as read-only for some reason. I had this issue happen once a while in the past, so I simply re-mounted it as rw.
Code:
mike@mike-desktop:~$ mount | grep -i 36CB
/dev/sdc1 on /media/36CB-D1A8 type vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)
[Code].....
View 3 Replies
View Related
