Ubuntu :: Auotomount Hard Drive - Can Get The Backups HD To Auto-mount On Startup But Not The Data HD
May 3, 2010
Dropbox will not start properly because my Lucid installation is on a SS HD (/dev/sdc) but my data, including my Dropbox folder is on an internal NTFS-formatted HD (/dev/sda), and I also have another internal HD for backups (/dev/sdb).
For some reason I can get the backups HD to auto-mount on startup, but not the data HD. My fstab file looks like this:
I have an internal hard drive which is NTFS that I have some of my windows stuff on.Ubuntu seems to mount it only after I choose to open it from the places menu.I would love it if it mounted automatically on startup but I can't work out how to do this
I had a drive that kept kernel panic'ing so my data center recommended using the spare hard drive to reinstall OS on, and import the data from the old drive. (they checked the hardware, it wasn't the hardware) The new install is done, and I need to mount the old drive and get backups off it since my data center does not provide management whatsoever.
It's the same OS on both (Cent OS 5.4 32-bit) I'm an advanced user on windows, but linux gets me. I can ssh in, do basic stuff like setup IP ranges and restart services. I normally navigate the box through SFTP so I have a gui. WHM shows me my drives as such
Found Disk: hda Found Disk: sdb
so I'm assuming SDB is my old drive and the drive I need to access. I attempted to follow instructions on
one would have to exclude certain folders / directories but would the backup be possible if the system is up and running in its native "live" state ? Which directories could be excluded ? Does swap need to be turned off ? I would like to make incremental backups on a separate partition of the same hard drive. I will endeavour to backup the MBR/ Partition table using dd.
I've been trying to unsuccessfully auto-mount my drives when starting up. I've made a script that sets me to the root using "sudo -s" and then mounts the drives. The commands to mount the drives work properly when entered into the command line, but when I try running them from an executable, they don't work. What might I be missing?
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
Nautilus mounts NTFS partitions when I acces them, and before mounting, it asks for root password. Is there a method to auto-mount ntfs partitions on Debian startup, without requiring root password each time they are automatically mounted ? And without installing additional packages.
i am using fedora 14. Each time i login i have to manually mount my windows drives. Is there any script or system setting which will help me to auto mount my windows drive on startup.
Just installed natty 64 bit. fully updated the system. i need to hard drives to automaticaly mount when starting the computer. What is the easiest way to do this in natty?
I have edited my /etc/fstab file in order to have it automatically mount a windows network share at startup.
The problem is, that it isn't really working during startup. After I log in, in order to make it mount I have to open the terminal and enter "mount -a".
The following is my fstab file:
Code:
I suspect this has something to do with my laptop not having made a network connection when the entries are mounted, but I'm not sure. How would I go about finding out about any errors?
I'm running 64 bit Ubuntu, 11.04. When I first installed, I could plug in my USB thumb drive and it was automatically mounted for me. Lately, this no longer happens... I use the Disk Utility to mount it manually. What I did wrong to lose this automatic mounting?
I just changed the os on my media server from Windows Home Server to Unbuntu 10.4 server. I got most of it working (samba, twonkymedia)
The only thing i have left to get working is the backup of that server. I installed bacula as i beleive it will do the job (unless someone has a better and simpler to configure idea) and i would like it to backup to my external usb 1Tb hard drive. I am able to mount the drive manually but this server gets turn on and off often to save power (and cut the electric bill) when not in use. I tried adding a line to fstab but when a do that, the server gets stuck on the startup even with the drive turned on. I read somewhere that i should use the UUID of the drive as it could change from sbd1 to sbh1 on restart so i did, same result.
Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.
Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.
i'm working with x86 small computer having 128 ram and 233MHz speed in processor nd i'm going to do a project which need auto mounting of a pen drive if you can post a url that I can download those OS.
The solution may to my problem may exist elsewhere, but I had trouble searching/finding it.I just bought a new external drive. The drive is formatted as ext4. I use it mainly in esata mode. Whenever I connect it, it mounts to /media/[UUID], where "[UUID]" is the UUID of the drive. I want it to be located at /media/backup when it is inserted, not in relation the UUID. I have tried putting a new line in my fstab (mount by UUID to folder) to mount the drive. It mounts correctly if the drive is connected to the computer and turned on during startup, but if the drive is off/not connected during startup Ubuntu barks at me. (I press 's' to skip mounting the drive) Is there a way to make external/removable drives mount to a certain location other than /media/[UUID] when they are inserted? I want the drive to mount to the folder while the computer is running, not only during startup.
I have this ubuntu machine that lives under my desk and is basically a utility machine. Mainly I ssh to it and get synchronize/backup files, etc.
When I reboot, for some reason the auto mount for my usb drives doesn't work until I actually hook up the monitor and log in to the gui. When I ssh in after reboot, I'm unable to access my USB drives! "Not Authorized"
I'm not sure how to mount a drive from the command line... really I just want the machine to auto mount the drives when it starts up... gui login or no.
I have a full working Mythbuntu 11.04 on a FakeRAID system (via ICH10R chipset). The OS is sitting on a 250GB partition and working fine. I am trying to get the 7.07TB partition mounted so that I can use it to store all my movies. When I mount it via the [URL] all works fine. When I reboot it cannot mount due to device being not ready or unavailable It appears the superblock goes missing at reboot. I have it formatted to ext4 with a GPT partition table. If I reformat and remount then all works fine again until I reboot.
My Fedora does not auto detect a flash drive if I get to attach it with the OS already running. I still have to make a reboot and attached the drive right from the start in order for it to be detected/mounted.
Unlike In Mint 7, Ubuntu and XP, it automatically detects the flash drive as soon as it is attached.
make my Fedora detect the flash drive so that I would not have to reboot everytime I would use it.
FWIW here are some outputs: Code: # /etc/fstab # Created by anaconda on Thu Feb 4 06:06:47 2010 # # Accessible filesystems, by reference, are maintained under '/dev/disk'
I upgraded Ubuntu 9.04 to 9.10 desktop a few weeks ago and an external USB drive that was mounting at startup on 9.04 is no longer mounting on 9.10. If I unplug the USB cable and plug it back in it comes up. The issue is strange in that when a regular non-admin logs in the drive auto mounts but does not for an admin login. I have not been able to put together search results that would lead me to a hint of why this would occur and/or what aresolution may be.Why would the drive auto mount when a regular user logs in but not auto mount for an admin? When I say admin I guess what I mean is a user with more privileges such as member of the admin group.
I have a directory /var/log/data its about 80 GB,It filling up quit rapidly.I don't have much space left in the system them So i will attaching another External HDD.My question is that i need to mount /var/log/data to new HDD.So i have old data and pulse new coming up.I don't want to copy data from /var/log/data then mount new HDD to /var/log/data you know what i am taking about is there a simple way like linking or any other.