Quote:
The other one mounts fine. They are all separate physical drives. Another oddity is in that it lists those two drives which are SATA as PATA, but I imagine that is something to do with my BIOS settings being on compatibility settings.
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies View RelatedI have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View Relatedi used to mount my drives in ubuntu..How to mount all the drives permanently?
View 2 Replies View Relatedubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again
View 9 Replies View RelatedI tried setting up my own partition table which apparently didn't go well.I have 1 compactflash-disk for linux and 2 hard drives for data which are set up for RAID1. But the RAID-drives doesn't get mounted.This is my first RAID-setup
Code:
me@server:~$ df -h
Filesystem Size Used Avail Use% Mounted on
[code]...
I like the 20 second boot from press of power button with my new install, BUT I can't mount drives with xfce's thunar. I can mount them with thunar but this way they still do not show up under places or on my desktop. How do I figure out how to mount them properly?
View 9 Replies View RelatedHow can I auto mount all my drive at start up, I want them to be auto mounted.
View 4 Replies View RelatedI am having problem mounting my 2nd hdd and external hdd, it keeps giving error msg saying only root can do it.
rudy@rudy-desktop:~$ sudo fdisk -l
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I am having problem with sdb1 (SFS file system ?) and sdc1 (external hdd)
I have recently installed Ubuntu 10.10 on my machine as dual boot using WUBI but on a seperate partition to Windows. Loving it so far, but i cannot get any external drives to mount - i've tried pen drives, camera memory cards and hard drives but nothing comes up.
I have just tried restarting with a pen drive plugged in, and it finally showed something in the computer folder - "memory stick drive" is shown (and my internal CD drive, which i'm not sure was there before.), but i still can't access it and when I try to unmount it gives me the message
Error detaching: helper exited with exit code 1: Detaching device /dev/sdc
USB device: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1)
SYNCHRONIZE CACHE: FAILED: No such file or directory
(Continuing despite SYNCHRONIZE CACHE failure.)
STOP UNIT: FAILED: No such file or directory
[Code]...
I have an Acer Aspire 3500 laptop that I'm running 10.04 on, pretty much everything works OK, and I don't appear to have any hardware problems (I've checked using Gnome Device Manager). When I plug in a USB flash or hard drive, I don't get any drives/devices to mount, although in Gnome Device Manager the USB device appears as a USB Mass Storage Device.
Running tail -f /var/log/messages produces this:
Dec 10 19:44:31 darren-laptop kernel: [ 5800.632058] usb 1-3: new high speed USB device using ehci_hcd and address 4
Dec 10 19:44:31 darren-laptop kernel: [ 5800.765161] usb 1-3: configuration #1 chosen from 1 choice
After a bit of a rough install, I got 10.04 up and running on an Intel D845GRG motherboard. All seems to be working fine except for USB flash drives. My USB mouse and keyboard work fine, but the two sticks I have (Kingston and PQI) will not mount.
View 4 Replies View RelatedUbuntu 9.10 64 bit
Can't mount external usb drives. There are no errors, they just don't show up anywhere.
Also Trash icon has disappeared from bottom panel, is inaccessible from Nautilus - "Sorry, could not display all the contents of "trash": Operation not supported" - and Desktop icons default to 'Keep Aligned' every time I restart.
etc/fstab with a flash drive and an external HDD plugged in code...
i would like to have all my ntfs drives mount @ start up here is the command im currently useing sudo mount -t ntfs-3g /dev/sdc1 /media/D -o forcei have made the folders D E F etc now i know that the command for starting restarting and stoping samba changed in 10.04 so did something change with mounting ntfs drives
View 1 Replies View Relatedhow would i mount mapped linux (ntfs drives) when ubuntu starts
View 2 Replies View RelatedI'm using 4 hard drives (1 of which is a sata drive) and i need help installing raid drivers i cant get these hard drives to mount at all
View 3 Replies View RelatedI've been trying to unsuccessfully auto-mount my drives when starting up. I've made a script that sets me to the root using "sudo -s" and then mounts the drives. The commands to mount the drives work properly when entered into the command line, but when I try running them from an executable, they don't work. What might I be missing?
View 2 Replies View RelatedI've got a 10.04 server install, on which I installed a basic gnome desktop. But I've never been able to automount usb drives or DVD/CDs!?but seem for desktop. May relate to not having standard gnome install? I don't have users-admin to try that, and don't see install package.
View 6 Replies View RelatedI installed 10.10 on my workstation but now my system refuses to mount two existing two data drives that were already there... sudo mount /dev/sdc /mnt/data-b gives me: mount: unknown filesystem type 'isw_raid_member'
I didn't change any BIOS settings... My BIOS is not configured for RAID at all, that setting reads AHCI, which should be okay for my kernel (using the stock 2.6.35-24).
I tried to force mount one of the drives with sudo mount -t ext3 /dev/sdc /mnt/data-b
but this gives me an even stranger message:
"/dev/sdc already mounted or /mnt/data-b busy (neither of them are true...)
It's mainly the "isw_raid_member" thing that troubles me... I didn't and don't have a RAID system at all..
a few days a go I got Samba messed up and I decided to just reinstall Ubuntu. Ubuntu resides on an 80GB drive and I have 2 1.0 TB drives that I use for storage. At one time (pre-Ubuntu) they were connected to a VIA SATA RAID card and I had them on a software RAID under Windows XP. Both worked absolutely fine under Ubuntu 10.04 (which had bee progressively upgraded from the original install of 9.04.
Now, both drives have been given the same label, and neither one will mount because the file system type is reported as "via_raid_array" rather than the EXT4 that they both should be. TestDisk can read them and identifies the partition as a Linux partition, and the data seems to be there. I have even reformatted one of them and still, it will not mount.
Can i mount my home folder in the following way?
/dev/sda5 /
/dev/sdb3 /home/Folder1
/dev/sdb3 /home/Folder2
I've been using 10.10 for almost a year with no problems. Then last week I plugged in my MP3 player (ONDA vx777le) and it did not automount as it usually does. I have since found that any USB stick will not mount any more either. They show up in lsusb
Code:
ken@ken-desktop:~$ lsusb
Bus 005 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub .....
I also see this in messages when I plug it in:
Code:
Apr 17 01:40:21 ken-desktop kernel: [24379.152035] usb 1-4: new high speed USB device using ehci_hcd and address 14
I'm assuming This happened with some update but I don't know what one.
Just installed natty 64 bit. fully updated the system. i need to hard drives to automaticaly mount when starting the computer. What is the easiest way to do this in natty?
View 9 Replies View RelatedYesterday, I deleted/reformatted one of my internal hard drive which had two partitions. Now everytime I log-in, Ubuntu tries to mount the two partitions that no longer exist. The only way I can resolve this is by pressing "S" twice while trying to log in to skip the auto-mounting process. Is this problem in the grub or should I just disable auto-mounting?
Auto-mounting was enabled automatically when I installed ubuntu in May, so I have no idea how to disable it or how to mount drives that are not automatically mounted at log in.
I use Ubuntu 11.04 (gnome) and have a ntfs partiton that shows up in the "places" menu that is normally in the gnome panel. But I think that partition isn't mounted till I click on the entry in this menu (when I want to access it from any other place, shortcuts for example, that doesn't work).
How can I correctly mount all partitions I want on startup?
Recently I tried something in the /etc/fstab file but don't know if this is correct...
i use Ntfs 3g for auto mounting my windows partition. but for some reason i want to get it unmounted on boot.but when i get into the NTFS config tool i cant figure that out.
View 2 Replies View RelatedSince I never got an answer to my last question:I'll ask something simpler. When Ubuntu is booting up, what directories are used for the boot process up until it mounts other drives (such as an SD card).hink that question makes sense,don't hesitate to ask forclarification, though.
View 6 Replies View RelatedI am running 10.04 Lucid Lynx 64 bit. Whenever I insert a CD or USB flash drive, I get the error "Unable to mount - Not Authorized". I can, however, mount these things by using the mount command from the console as root. I suspect that either the component of Lucid which is responsible for automounting has a bug, or there is some kind of permissions bug with the way Ubuntu sets up the primary user. Does anyone else have this problem? Is there a workaround? Should I file a bug report?
View 9 Replies View RelatedI am trying to setup nfs to mount the drives located on my desktop, to my laptop, so I can watch them on my laptop rather then my desktop. I have both nfs server running on both the desktop and laptop. Desktop is running Arch Linux and the laptop is running Ubuntu, I keep getting this error claiming that the devices dont exist. I restarted all the services on both machines and tried editing my fstab/exports on both machines also but still nothing seems to be working.
Here is my nfs restart log from my laptop [URL]
And now desktop [URL]
Here is the export/fstab from my desktop [URL]
Now for my laptop export/fstab [URL]
There rather the same, but just wanted to include both for each machine just in case there is a distinct difference in something I did.
i have a triple boot of windows XP,7 and ubuntu10.10 netbook remixis it possible to require a password to mount the windows drivesthere is no log on password on the ubuntu but i dont want people to access the other drives unless they have my password
View 3 Replies View Related