Debian :: Fail To Mount NTFS Drives?

Jul 22, 2010

i am a new user to linux, i installed debian on dual boot with windows 7but now i am unable to access the ntfs drives used by windows originally from the debian OSi am wondering what could be the problem and how can i solve it

View 9 Replies


ADVERTISEMENT

Ubuntu :: Can't Mount Ntfs Drives?

Feb 1, 2010

ubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again

View 9 Replies View Related

Ubuntu :: Mount Ntfs Drives @ Startup?

Jun 6, 2010

i would like to have all my ntfs drives mount @ start up here is the command im currently useing sudo mount -t ntfs-3g /dev/sdc1 /media/D -o forcei have made the folders D E F etc now i know that the command for starting restarting and stoping samba changed in 10.04 so did something change with mounting ntfs drives

View 1 Replies View Related

Ubuntu :: Auto Mount Ntfs Drives?

Jul 30, 2011

I use Ubuntu 11.04 (gnome) and have a ntfs partiton that shows up in the "places" menu that is normally in the gnome panel. But I think that partition isn't mounted till I click on the entry in this menu (when I want to access it from any other place, shortcuts for example, that doesn't work).
How can I correctly mount all partitions I want on startup?
Recently I tried something in the /etc/fstab file but don't know if this is correct...

View 9 Replies View Related

Ubuntu :: Unmount & Mount Drives Using Ntfs 3g?

Sep 20, 2009

i use Ntfs 3g for auto mounting my windows partition. but for some reason i want to get it unmounted on boot.but when i get into the NTFS config tool i cant figure that out.

View 2 Replies View Related

Ubuntu :: Configure Auto Mount For NTFS Drives?

May 16, 2011

I have a dual boot setup with a fair amount of files in my windows volume. I noticed that the Ubuntu 10.4 GNOME version (at least) does not auto mount my NTFS drive. Of course as I have seen from various post this gets annoying when opening up a program that loads previous files before I for ex, click the '110GB FileSystem' icon from Nautilus or similar...that seems to mount it for me then... I want my 110GB NTFS volume to mount automatically so I dont have to do this process everytime I reboot.

I found a post on the forum (the latest one I could find) below that recommends installing ntfs-config. The post is from May 2008 but mentions 10.10 (via edits) so I'm confused and wondering if there is an easier/default way..or this is still the way to go? After several screw ups editing system files manually, Im very cautious about doing it in this case because its a work computer and frankly the uninsttall or editing the fstab manually worries me.

View 2 Replies View Related

CentOS 5 Hardware :: How To Mount 2 Ntfs Hard Drives

Dec 11, 2010

How can I mount 2 NTFS hard drives, preferebaly automaticaly on startup. a GUI would be nice too.

View 3 Replies View Related

Ubuntu :: Computer Wouldn't Mount NTFS Drives Anymore

Jul 27, 2010

I just installed Ubuntu 10.04 LTS x64 on my computer. This also the first time I'm working with a linux distribution, so I'm sorry if I don't understand everything.Yesterday Ubuntu was running perfectly. Today I tried to install nvidia driver, and after that I started rythmbox. That was the moment I noticed my computer wouldn't mount NTFS drives anymore. What is weird cause yesterday it did mount them, and I didn't change anything (atleast I think I don't). The exact error Message is:Unable to mount location

So I searched the internet and they said to other people they should check System>Administration>Users and groups.So I did check it and it said account type: custom, when I clicked on the button change, which was next to it, It didn't do a thing.

View 9 Replies View Related

Ubuntu :: Easilly Mount Drives (including Ntfs Ones) Via Gui Without Password Prompt?

Jun 5, 2010

I have recently tried to switch from windows to kubuntu. So far nobody can help me on the problem that kubuntu keeps asking password (kdesudo - please input your password to mount this device) in order to mount anything with ntfs on it. This is despite i have made needed changes in order for this operation to be possible without rootilleges (recompiled ntfs-3g with internal fuse, set the setuid bit/setguid bit,ded user to disks, gave user permissions to mountpoint). I can do mount /dev/... and it works without sudo but the dolphin, or "removable media" thingie in system settings still will ask a password to mount anything with ntfs on it.

So, therefore a question arises. I can of course do all the mounting manually (automount on boot does not help since my external hard takes time to "boot up" when it's first accessed and that is when system boot takes 10 seconds instead of 1 second and starts complaining about "drive not ready, try manual mounting"So, i would like to have a simple gui something that can mount or dismount (run mount and umount for me effectively) removable or internal disks. Could someone advise some program that he uses? suppose there are plenty such around since the operation is very common...Maybe even a file managertead of dolphin)? Preferably one that does renaming li

View 2 Replies View Related

Debian Installation :: Critical Bug Of "mount -t Ntfs" Cause NTFS Partition Broken

May 2, 2010

About dual boot system with winxp and lenny.

Storage information:
1st primary:SG 160G ATA 100
1st secondary:WD 160 ATA 133
SATA:WD 1000
2nd primary:DVD
2nd secondary:DVD±RW

Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.

info about lenny setup:
1.Partition list:/boot,/,/home,swap
2.Every partition is XFS except swap.

At the end of installion,lenny installed grub on (hd0) that is 1st primary.

Everything seems OK.Lenny runs OK.

But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.

After many times of trying.
I solved the problem by the following way.
1.Boot with windows xp's install CD and use fixmbr on (hd0).
2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1)
After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0).
3.Reboot and Press F8 for a boot menu then I can select which disk to boot.
windows boot from 1st primary's mbr,lenny boot from lenny's grub.

The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.

View 8 Replies View Related

Debian Multimedia :: Adding Folders On NTFS Drives To Music Library?

Dec 22, 2010

I have my music library stored on an NTFS hard drive, from when I used to run Windows. The drive mounts successfully in Linux and I can manually play tracks from it, but I don't seem to be able to point Rhythmbox or Banshee to the drive or to folders on the driveto add them to their libraries. Is there any way to do this? Otherwise I'll have to begin the very long process of juggling files between hard drives until I have enough free space to format one of them

View 3 Replies View Related

Ubuntu :: Mount.ntfs And Mount.ntfs-3g Reside Simultaneously?

Mar 4, 2010

Can mount.ntfs and mount.ntfs-3g reside simultaneously?

Whilst accessing an external NTFS drive mount.ntfs takes up a lot of CPU. I am not sure if its mounting the drive using mount.ntfs or mount.ntfs-3g? How do I find out and if they coexist how do I make the default mount drive ntfs-3g?

View 3 Replies View Related

Debian Configuration :: Jessie WD Disk Mount Fail

Aug 20, 2015

A few days ago I upgraded from debian 7 to 8. First I update, upgrade and dist upgrade - change source list and again update, upgrade and dist upgrade.When inserting a USB disk on key, it works okay. When plugging my WD "My passport" backup USB disk it does not work. The automatic mount works, but the disk can be accessed.I tried to do it manually in a format that worked on debian 7..Manual mount fails too.

umount My passport
fdisk -l (to see device name)
mount -t vfat -o rw /dev/sdb1 /media/kuku/usb_mp4
dmesg | tail
[ 2381.080822] sd 9:0:0:0: [sdb] No Caching mode page found
[ 2381.080828] sd 9:0:0:0: [sdb] Assuming drive cache: write through

[code]....

View 2 Replies View Related

Debian Hardware :: 8.0 Jessie WD Disk Mount Fail

Aug 19, 2015

A few days ago I upgraded from debian 7 to 8. First I update, upgrade and dist upgrade - change source list and again update, upgrade and dist upgrade.

When inserting a USB disk on key, it works okay. When plugging my WD "My passport" backup USB disk it does not work. The automatic mount works, but the disk can be accessed.

I tried to do it manually in a format that worked on debian 7

Manual mount fails too.

umount My passport
fdisk -l (to see device name)
mount -t vfat -o rw /dev/sdb1 /media/kuku/usb_mp4

dmesg | tail
[ 2381.080822] sd 9:0:0:0: [sdb] No Caching mode page found
[ 2381.080828] sd 9:0:0:0: [sdb] Assuming drive cache: write through

[Code] ....

View 4 Replies View Related

Debian Configuration :: CIFS Mount At Boot Time Fail?

Nov 20, 2010

Running Debian stable. I added the following command to rc.local and made it executable:mount -t cifs -o username=ted,password=computer,uid=mooreted,gid=users "//192.168.1.121/Storage Volume" /mnt/vortexAfter rebooting dmesg throws the following error:

[ 21.400697] CIFS VFS: Error connecting to IPv4 socket. Aborting operation
[ 21.400708] CIFS VFS: cifs_mount failed w/return code = -101

However, if I run the command as root after the system boots it works fine.Been using this method on other distros for over a year. No idea what the problem is.

View 4 Replies View Related

Debian :: Mount And Write Into NTFS?

Dec 21, 2009

I have 64GB USB stick NTFS formated. I'd like to exchange files much bigger than 4GB between windows and linux. FAT32 doesn't support files bigger than 4GB. Is it possible to mount NTFS RW under Debian Lenny?

View 3 Replies View Related

Debian :: Can't Mount NTFS Drive On Jessie

Jul 9, 2015

If i click the ntfs partition from nautilus, it prompts to type password. If i type the password and enter, i see this message:

Code: Select allUnable to access “alldisksda5” Error mounting /dev/sda5 at /media/user1/alldisksda5: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda5" "/media/user1/alldisksda5"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0). Metadata kept in Windows cache, refused to mount. Failed to mount '/dev/sda5': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option.

View 1 Replies View Related

Debian :: Mount Ntfs Partition In Fstab?

Mar 13, 2011

/dev/sda1: UUID="1ABC9F967605D379" TYPE="ntfs"

View 2 Replies View Related

Debian :: Mount NTFS Partition At Startup?

Nov 25, 2015

I just installed Debian 8.2 (Jessie). I couldn't find the way to mount the Windows 7 partition, at installation time.

ÂżCould you tell me how can I mount NTFS partitions in order that they be mounted at boot time and can be accessed (read and write) by any user?

I know, I should edit "/etc/fstab" file. But I don´t know very well how to modify it.

And... ÂżShould I create the mount point directory, also?

View 4 Replies View Related

Debian :: Mount NTFS Partitions In /etc/fstab?

Jun 29, 2010

Using: Debian Lenny. I want to mount 2 NTFS partitions in my /etc/fstab file, so that I needn't manually mount them when I want to use them. One of the partitions is the primary partition on the same hard disk as my Debian /, /home, and /swap partitions. The other is a 2nd internal hard disk.

a) Should I use ntfs-3g instead of ntfs as the /etc/fstab filesystem? I want to be able to read and write to the partitions as a user and not just as root.

b) I have read on the forum that "mounting NTFS partitions through fstab is not a great idea" - I thought that any dangers of doing so were ancient history. Why would it not be a good idea?

c) Which options should I use?

d) If I use 'user' instead of 'users' so that one specific user (me) can use the partitions, how do I specify which user name? (The man page is annoyingly unclear about this).

View 5 Replies View Related

Debian Multimedia :: KDE 4.6.4 - Unable To Mount NTFS

Jun 27, 2011

Recently updated KDE to the last version available, v4.6.4. Apparently Dolphin lost the ability to mount ntfs/fat32 volumes. It was working great with 4.6.3. I'm getting this error while trying to mount an external HDD formatted as NTFS:

An error occurred while accessing 'LaCie', the system responded: org.freedesktop.UDisks.Error.Failed: Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

View 2 Replies View Related

Debian :: Cannot Mount 3 NFS Drives After Web Server IP Changed

Jan 24, 2011

Someone in my dept rather stupidly changed an IP of a webserver, and ever since we changed it back we cannot mount 3 NFS drives.

The Error
Code:
HTTP1:/etc# /etc/init.d/networking restart
Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: lock /var/run/network/mountnfs exist, not mounting
if-up.d/mountnfs[eth1]: lock /var/run/network/mountnfs exist, not mounting
done.

I have removed that lock file and tried a
Code:
mount -a
but it just hangs?

The FSTAB hasn't changed at all, and the other web servers can mount to the NFS share fine. I have tried alot, removing the lock file and rebooting etc but no luck. Debian Lenny.

View 1 Replies View Related

Debian :: To Mount External Drives On Startup?

Mar 14, 2010

I want all my external drives mounted when I start OS.I don't want to do it for a specific external drive. I want my external drives mounted by default.o you have an idea? Does linux have such a configuration I can change?

View 8 Replies View Related

Debian :: Auto Mount Ntfs Partitions On Startup?

Jul 12, 2011

Nautilus mounts NTFS partitions when I acces them, and before mounting, it asks for root password. Is there a method to auto-mount ntfs partitions on Debian startup, without requiring root password each time they are automatically mounted ? And without installing additional packages.

View 3 Replies View Related

Debian :: Mount Point For Automount Usb Drives In Jessie

Oct 5, 2015

I'm running KDE in Jessie and also have Gnome installed. When I connect a usb drive it gets mounted at /media/username/disklabel. I would like to have it mounted at /media/disklabel which is how it worked in Wheezy. How can I make that change?

View 2 Replies View Related

Debian :: Mount Multiple External Hard Drives ?

Dec 20, 2010

How to mount multiple external HDD's. I'd like to link or mount the music, torrents, and general files from several external hard drives and apply permissions (in some cases I only want the mount or link to be read only).

My setup:
- Seagate Dockstar running Debian squeeze (it's headless so I don't have a gui running)
- Two external HDD's with one partition on each (250GB and 400GB)

What I'd like to accomplish:
1. Mount the external HDD's to /media/HDDs as read/write (this is already working using udev and autofs and it's available in samba)
2. I'd like the MUSIC directories on both external HDD's to show up under the same mount point. In other words I want the MUSIC folders (from both HDD's) to appear as one large library of music. And I only want this to be readonly. It will be used as the library for mpd and/or squeezebox.
3. Mount a directory used to download torrents to. I'll probably pick on HDD as the target for torrent dowloads. But let me know if you have any other ideas regarding this.

Since I have the first one done, how would I accomplish 2 & 3?

View 1 Replies View Related

Debian :: Can't Mount Ntfs Partition Clicking From File Manager

Jul 25, 2015

It is gnome 3, debian jessie, nautilus file manager. Click ntfs partition from file manager, type password got error:

Code: Select allUnable to access “alldisksda5” Error mounting /dev/sda5 at /media/user1/alldisksda5: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda5" "/media/user1/alldisksda5"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0). Metadata kept in Windows cache, refused to mount. Failed to mount '/dev/sda5': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option.

Why is this error? Windows has been shutdown normally. What to do?

View 3 Replies View Related

Debian :: Find + Mount.ntfs-3g Strong Disk Usage

May 10, 2011

Since I installed Debain Squeeze with KDE (for more than a month), there is something I cannot explain to myself. 5-10 minutes after bootup my hard disk begins to work very intensely. Then, after 2-3 minutes it comes back to its normal operation. Using "atop" I found out that the first process that squeezez my HDD is "find". Then, a little bit later, mount.ntfs-3g appears. Both do what they do, then exit and everything's back to normal. What I suppose, is that that something is searching, first on the Linux partitions, then on the ntfs partitions.

Does anybody know what is this phenomenon related to? Or at least, how could I find out. Ah, and to avoid some basic troubleshooting questions: I have 3 GB of RAM, so no swap is needed. And I repeat: it's find and mount.ntfs-3g that use the HDD.

View 10 Replies View Related

Debian :: Properly Mount Ntfs Partition At Boot Time?

Aug 8, 2011

in debian stable, what is the proper configuration to add in /etc/fstab in order to mount ntfs partitions automatically at boot time, for all users, and every user to have read, write and execute permissions ?

View 2 Replies View Related

Debian Configuration :: Can't Auto-Mount External NTFS Volume

Apr 6, 2010

I have successfully mounted my Win7 volume and my external hard drives NTFS volume as well. However, after modifying the fstab I seem to only be getting the win7 volume to auto-mount. Below is the contents of my fstab. /dev/sdf3 is not mounting. Again, it works no problem if I manually mount it.

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type>  <options> <dump> <pass>

[code]....

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved