OpenSUSE Hardware :: Configured The Queue Same Way It Used To Be On The Old Computer But Nothing Ever Comes Out On The Printer?
Mar 21, 2009
As you know some(?) new computers have no built-in parallel port. The one I built didn't have one anyway so I bought a PCI-express card with a port, a cheap one with a printer port, nothing more.OpenSUSE 11.1 sees the card somehow and "lspci" says it's aCode:Parallel controller: Oxford Semiconductor Ltd Device c110"hwinfo --printer" does not see it at all, whatever that may mean?I have connected my old inkjet to it and configured the queue same way it used to be on the old computer but nothing ever comes out on the printer. Maybe the fact that I'm running openSUSE 64-bit has something to do with it, wrong drivers or some such?
I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups: E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"! E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
Since I changed my System from openSUSE 11.3 x86_64 to openSUSE 11.4 x86_64 my printer (Samsung ML-2850 via USB) seizes to function (clean installation). The printer connects to two machines via a KVM-switch. On the other machine (Windows 7 x64/Windows XP x64) the printer is working fine. This did not change when I switched the Cables/KVM-ports. In addition, when I was using openSUSE 11.3 x86_64 the printer also worked fine. All necessary CUPS-packages are installed:
I installed SuSE 11.2 64-bit on a new computer without any printer attached. When I read the manual for the mainboard, I discovered to my delight that it actually has a parallel port, it's just not connected. I moved the cable from an old desktop and put it into my new desktop. After enabling the port in the BIOS setup, the Hardware Information dialog in yast correctly shows that I have a HP LaserJet 1100 (/dev/lp2).
How do I configure the printer? "Printer" in yast tells me "There is no print queue". When I click "Add" yast tries to detect a printer and gives up with the message "No connection selected". I can't add a selection, however. "More connections" gives me the exact same error message. The "Connection Wizard" allows me to select "Parallel Port", but then complains about missing connections again. The cups demon is running. I don't have /dev/lp2, is that the problem?
I have an HP printer for my Lenny which has worked for some year. But I don't remember what method I used to install it. So this is one piece of the puzzle that I can't see. But like I said the printer works. One day I accidentally printed more than I had papers in the printer-machine. Then I kind of stacked a lot of print jobs in the queue out of frustration. So whenever I reboot the PC/Lenny then it waste some paper by printing things that got stuck in the printer queue. It's not very environmental this weird behavior.
So next time this happens how do I flush the Printer queue so Lenny doesn't remember what happened before the reboot? I followed these instructions earlier but it only switched one weird behavior with another weird behavior. So it didn't work for my Lenny, and I couldn't find any better solutions on the Internet. [URL]...
my ERP is sending multiple xml files to my queue and printing daemon reads each files and send it to windows printer (queue) where another software that uses each file and prints one document at a time.I would like to control first part when ERP send XML file I would like printing daemon to send files to windows queue in order the files came in from ERP. Currently it send it in random order. (i think it's based on how fast it can process, size of file..ect)
My elderly HP Laserjet 4P has worked well for over 15 years. I have it connected to the home network via a Trendnet TE100-P21 Print Server, and setup has always been straightforward and easy. The whole setup has worked quite well with Fedora 9 or 10 thru 14, but then stopped working within the last couple of weeks. I'm assuming an update broke something, as I can find no other reason. When I send a print job or test page, I get a Print Error dialog. The print que shows a "stopped" status for the job. In the Error dialog I use the Diagnose button and step through until I get the Status Messages dialog, which informs me: "The printer's state message is: 'Data file sent successfully'".
Then I enable debugging and send a test page. Stepping through the dialogs it tells me it cannot detect a problem, and gives me an error log, which I've attached. The Trendnet server has a web admin interface. In that interface I can send a test page successfully. Also, I can open a VirtualBox (Windows XP) in Fedora 14, and successfully print from it. My print setup in Fedora is the same as it has been for several years now, and nothing has changed on that end. I have rebooted Fedora and the Trendnet server. All other computers/OS's on the network have no problem printing, only this Fedora 14, and only recently.
My Printer Brother DCP-8045D only prints, when I send the computer (Lenovo X200) to suspend (or shutdown) and wake it up again, whilst a document is in the printer queue.
I'm using Ubuntu 10.04, and I have an HP D1660 printer. The printer has already been added, and HPLIP is installed. I can't get anything to actually come out of the printer, even though I can send a job to the printer. Does this have anything to do with CUPS?
Here are some of the last error log messages after using the printer troubleshooter (I only included some because it's a long list):
Can the SFQ queue be used to divide bandwidth not only per connections but also per computer? E.g. if two computers download something each computer gets half of the bandwidth. I'm trying to do my own script based on wondershaper and would want to divide the bandwidth between all devices so that one device can't saturate the uplink.
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
is it possible to get the length or even the items of both queues, the run queue and the swap queue? I've googled a lot but had no luck. Maybe I havn't used the correct search words...
Is there any header and/or code example to use structures or any API to get these information from the kernel or the scheduler?
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
I'm running openSUSe 11.3 on a laptop and the printer is connected to my desktop which is running Windows XP. I have the printer and several folders and drives shared. I can see the folders and drivers on my laptop but I cannot get the printer to actually print. It is an HP printer but I am not using HPLIP. I can send a print job to the queue and the printer resets itself like it's going to print but nothing else happens and the print job just sits in the queue until I hit cancel and restart then printer.
I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
can KMail be configured to have two different accounts and keep one tree of folders for each, like Seamonkey?
VampirD No in elenath h�lar nan h�d g�n -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
I have scribus install on my machine which someone suggested would do what I want. It does. But unfortunately I can not get it to work. The text print screen freezes when it is loading a font and will not respond.
One of the other disadvantages with scribus I did find was it wanted to print the fonts in all the size available and at 3 per page I have enough fonts to fill 607 pages.
I have googled, read all the scripting books I have, read several online tutorials and have not found a way to send a request for a certain style font to the printer from the command line.
(1) What is the difference between OpenSuse and Suse Linux Enterprise Server (SLES) ? I see there is a link to download SLES in the Novell site. Will we have to buy SLES after 60 days for us to continue to use that OS ?
(2) I see this link Software.openSUSE.org
There is this link to download 4.7 GB DVD of Opensuse. Does that mean we need not have to download any packages from this repository, ndex of /distribution/11.2/repo/oss/suse/i586
For installing Oracle on Opensuse 9 I remember I had to install many of those packages on my laptop.
Do we still need to install those packages ?
(3) I have to install this SUSE (either Opensuse or SLES) on my laptop. My Laptop is Compaq Presario CQ60.
Can I connect to Internet if I install this software ?
Last time I faced lots of problems. I thought some laptops cannot be configured to Internet if installed with Linux.
I am brand new to sendmail. I have a web application running on APACHE2. I'm told that it uses a PHP mail function to send emails for notifications. I configured my php.ini to use sendmail by adding the following line: sendmail_path= /usr/sbin/sendmail -t -i (I've tried it without the i as well) As far as the sendmail configuration is concerned, I used the GUI interface provided in the KDE environment (labeled Mail Transfer Agent). I inputted my outgoing mail server's IP address and login information. I also unchecked TLS since my mail server does not use that.
The problem is that no email ever gets sent. The web application states that the email was successfully sent. But I think its because it hands the email to PHP (leaving the responsibility to PHP)...then it believes the email is sent. My mail server uses plain text for authentication. Im not doing anything special with it. I told my mail server to accept connections from my linux box. I also checked my mail server's logs and see that no record of any connection from my linux server is logged.
So it seems my linux server isnt even communicating with my mail server. Both boxes are on the same network. My linux box can ping my mail server just fine. Firewall is disabled. How do I correctly configure sendmail to use an outgoing SMTP server to send emails. And how do I verify that setting works without using the web application I installed? (I want to verify whether or not the issue is with sendmail or the web application). Where do I find sendmail's logs so I can check to see why it's not hitting my mail server?
I've had a go with a netbook and 11.2. Installed ok and X configured KDE desktop with default 1024x600.
Minor. Most apps on running fit between top and panel but then you run their menu item like 'settings' or 'prefs' and its window size is coming up >600 in height. Some allow a scrollbar on the right but for those not, the result is not seeing the 'ok, apply, cancel' buttons. I did find that changing certain font sizes under System Settings both up and down and re-logging in sorted that for most.
If you click the top-left icon on a window you get to the special window settings and can see and change the geometry. However, for some that didn't respond to the font change above and seem to be hardcoded geometry-wise for a 1024x768 minimum, the result is a "squashed" window. Certain button options seen in the normal window are not there or the items are overlayed on each other.
Specific is Okteta the hex editor.Major. I don't use a wheelscroll mouse on other pcs. This netbook has a trackpad with the rightside 7mm or so having a scroll facility. In editor or Firefox running a fingertip on it will scroll the pages which is nice instead of looking and clicking in the scrollbar.
What is NOT nice, I found, is that if the cursor arrow is over a desktop patch and my finger hits that 7mm part of the trackpad when I want to move the arrow, it results in switching between desktops. I wondered what the hell happened when the apps and console I had up disappeared then reappeared then.OK this is the wonderful KDE4 where you can do anything and customise as you like. Well no, not about this. Funnily enough it shows up in the KDE handbook help about being an option in the desktop numbers section but of course isn't there. A fallback entry from previous help version it seems.
I've seen, and have some to make of, the general KDE4 crits but this one's a real WTF. So desk users with a wheelmouse doing some critical reading of some file or webpage could have that rudely interrupted just because their hand moves inadvertently? OK, maybe I should direct at KDE people, but is this fixable in the supplied 11.2 KDE4 or later KDE4.x ?
I have installed opensuse 11.4 xen on a HP ML115 G5 AMD Opteron server, which previously hosted a fully working opensuse 11.3 xen. The problem seems to be that br0 is not showing as a bridge device in network settings. When I first installed opensuse 11.4 networking was available via dhcp, I then installed the xen tools and answered the prompt to create a bridge, it was only when I re-booted the system that I lost my network connection.
Going back into network settings I compared the settings to an existing working opensuse 11.3 xen install that I have and noticed that br0 is not showing as a bridge device in network settings so cannot be selected, in fact no bridged devices are shown.
i have configured as root mine wireless connection and the connection works out the box. When i reboot mine pc or i turn off mine pc the configured wireless connection is gone and i must make an new one. This is strange i don't know what is happening but i am several days struggling with this and now i ask this forum what is going wrong i am using Opensuse 11.2 64 bits, Sitecom 300 N Wireless PCI Adapter.
I do not know much about Ubintu...My bro put it on my computer. I'm trying to connect a new Brother MFC-7340 to the computer but cannot get the drivers to install, as I do not understand how to even check the version of Ubuntu that I have.
I just bought a new system with NVIDIA GeForce 9100 integrated graphics. I used [URL] to install the NVIDIA drivers and utilities. If I use sax2 from the commandline in runlevel 3 (or from KDE) and select LCD 1680x1050 for the display, I am able to test and save the configuration. If I then init 5, KDE starts with the proper display settings. NVIDIA X Server Settings tool shows that I have a Gateway FPD2275W(which is what I have) with display dimensions 1680x1050.
I even have the option to change the refresh rate to 75. I never told the configuration tools what kind of monitor I have, so something detected it. The problem comes when I reboot. The display reverts to 1280x1024 which is not correctly proportioned for my display. The NVIDIA tool then shows some kind of generic monitor, and does not give me any options to configure the display correctly. My system has an AMD Phenom(tm) II X4 820 Processor.
Trying to move from Windows to OpenSUSE. I have installed OpenSUSE 11.2, and am having a hard time trying to connect to the internet using my nokia E65. I have tried to configure the modem thru YaST and it keeps showing that my nokia E65 modem is not configured, but adds another modem every time I configure using the edit button i.e. modem0, modem1 etc.
When i finish the configuration I get pop ups on the bottom right conner: Notification from network management WLAN interface attached Network interface attached
But nothing happens afterwards. When I connect the phone it shows that it is recognized as a modem (probably). but when I click on the icon so it connects to my service provider "econet" it just says activating with a red x in the conner, and still nothing happens!
The following are the screenshots (still not sure how to attach files on this forum), may someone assist, with that too.
I really want to move from Windows but this is what's stopping me. the sooner I connect to the Internet through my phone, the sooner I leave Windows, since it's the only way I can connect to the internet.
Installed 11.3 as new install on Thinkpad T42. I now have a persistent notification "Nepomuk was not able to find the configured database backend 'redland' ... what it means. System seems to be working but desktop icons have grey vertical rectangular box when selected. No objects to select in the boxes though. Previous version had tools available as I recall.
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
