OpenSUSE Hardware :: 11.3 - Print Jobs Just Sits In Queue
Jul 26, 2010
I'm running openSUSe 11.3 on a laptop and the printer is connected to my desktop which is running Windows XP. I have the printer and several folders and drives shared. I can see the folders and drivers on my laptop but I cannot get the printer to actually print. It is an HP printer but I am not using HPLIP. I can send a print job to the queue and the printer resets itself like it's going to print but nothing else happens and the print job just sits in the queue until I hit cancel and restart then printer.
View 9 Replies
ADVERTISEMENT
Apr 3, 2011
CUPS was not originally installed on my server, I have installed it but cannot print to my network printer. On my laptop, I can... they are both running the same version of Debian. What could be missing?
Here are some details...
I have two computers running the same version of Debian. One is a server with no GUI and the other is my laptop with GDM installed. My laptop (which prints with no problem) is connected via Wifi. My server is connected directly to the router via Ethernet. I cannot print from the server.
The printer is a Canon Pixma MP495 that connects to the router via Wifi. I have downloaded drivers for the printer from [url] and installed them successfully using dpkg on both computers.
Right now I have a regular text file that I am using for a test page. To print from my laptop (with success) I type:
Code:
This does not work from the server. What could I be missing?
lpq run on server:
Code:
lpinfo readout:
Code:
View 14 Replies
View Related
Mar 28, 2010
I have 2 printers plugged into a Windows XP PC (an Epson Stylus Photo RX580, and an HP Laserjet 1020) with full sharing on and everything, and is shared with other Windows PCs via the network I have set up. It has worked perfect. But today I added a PC running Ubuntu 9.10 and and can't figure out for the life of me what I am doing wrong. I installed both of the printers via the GUI in Administration, and both of them are detected and Ubuntu says they're working. But when I put something in the queue to print it stays there with the status "pending".
View 8 Replies
View Related
Jun 16, 2010
I have no idea what's going on. I've had this machine running for over a year, and it's been great. A month or so ago, I realized that jobs weren't going to the printer. When i VNC'd in, I noticed that print jobs would show up in the queue as "Processing" briefly, then disappear.
lsusb:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I've even reinstalled the OS (not just for this reason) to no avail. Printer is dete cted without issue, I just can't use it.
View 6 Replies
View Related
Aug 22, 2010
my ERP is sending multiple xml files to my queue and printing daemon reads each files and send it to windows printer (queue) where another software that uses each file and prints one document at a time.I would like to control first part when ERP send XML file I would like printing daemon to send files to windows queue in order the files came in from ERP. Currently it send it in random order. (i think it's based on how fast it can process, size of file..ect)
View 5 Replies
View Related
Jun 10, 2010
My Printer Brother DCP-8045D only prints, when I send the computer (Lenovo X200) to suspend (or shutdown) and wake it up again, whilst a document is in the printer queue.
View 2 Replies
View Related
Jun 8, 2010
We have a lpr server for printing (not CUPS for compatibility with complicated domain/systems). We configured our linux systems -- RHEL4, RHEL5, and Ubuntu 10.04 -- so that lpr is one of the gtk print possiblities by adding 'gtk-print-backends = "lpr,pdf,file"' to gtkrc. This works great for several gtk-enabled applications like Acrobat Reader (acroread).
However, Firefox 3+ (tested 3.6.3 & 3.0.19) doesn't actually queue any lpr jobs until after quitting the application.
View 1 Replies
View Related
Dec 6, 2008
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
View 8 Replies
View Related
Feb 26, 2011
Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies
View Related
Feb 16, 2011
I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies
View Related
Nov 18, 2010
is there a command or utility out there anywhere which can output a countdown of upcoming jobs from crontab? So you can display the queue of tasks in the order that they'll next run.
Anything like this out there?
EDIT: I realise there's crontab -l but that just echoes out the contents of the crontab file. I'd like somehow to get a countdown.
View 4 Replies
View Related
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
Mar 27, 2011
Since I changed my System from openSUSE 11.3 x86_64 to openSUSE 11.4 x86_64 my printer (Samsung ML-2850 via USB) seizes to function (clean installation). The printer connects to two machines via a KVM-switch. On the other machine (Windows 7 x64/Windows XP x64) the printer is working fine. This did not change when I switched the Cables/KVM-ports. In addition, when I was using openSUSE 11.3 x86_64 the printer also worked fine. All necessary CUPS-packages are installed:
[code]...
View 6 Replies
View Related
Dec 13, 2009
I installed SuSE 11.2 64-bit on a new computer without any printer attached. When I read the manual for the mainboard, I discovered to my delight that it actually has a parallel port, it's just not connected. I moved the cable from an old desktop and put it into my new desktop. After enabling the port in the BIOS setup, the Hardware Information dialog in yast correctly shows that I have a HP LaserJet 1100 (/dev/lp2).
How do I configure the printer? "Printer" in yast tells me "There is no print queue". When I click "Add" yast tries to detect a printer and gives up with the message "No connection selected". I can't add a selection, however. "More connections" gives me the exact same error message. The "Connection Wizard" allows me to select "Parallel Port", but then complains about missing connections again. The cups demon is running. I don't have /dev/lp2, is that the problem?
View 9 Replies
View Related
Jan 24, 2010
have a big print job sitting in the queue which I don't need (the print job that is) .. QUESTION: how do I clear the print queue in Ubuntu 8.04
View 6 Replies
View Related
Aug 23, 2010
The Gnome Print Manager found the printer with no problems. The correct driver was available - so I installed it. The printer shows up when called by a print job I want to send. The queue pretends to process it. The queue states "completed." Then Nothing comes out of the printer. XP shows the print job as pending. Still nothing comes out of the printer. And I can't delete the job from the Ubuntu queue (because that lying SOB tells me the job is completed). I can't print from XP to that printer until I delete or cancel the Ubuntu job (from the XP queue) - or clear the XP print queue (by deleting spool files). Permissions on that printer are not an issue. Printing from Ubuntu to that printer worked OK on earlier versions of Ubuntu.
View 1 Replies
View Related
Dec 3, 2010
So I have Fedora 14 installed on a laptop directly connected to my printer. I really never use the laptop except to send print jobs to it wirelessly. I was wondering if there was a way to make it suspend or sleep, or even idle everything down so it uses less power, but still listen for print jobs?
View 2 Replies
View Related
Apr 30, 2011
I have a problem with cups dropping print jobs. The machine fedora 13 installation using cups 1.4.4-10
The dropped jobs happen only rarely happen and therefore is difficult to debug the problem since it doesn't happen 99% of the time. This morning (while in the shower) I wondered if the lost jobs are lost because they are timing out, perhaps because of slow input from a user. I can test this more later in the week..
The print jobs are initiated from within a COBOL program. COBOL opens the print file as output and at this stage a job appears in the print queue with a status in the print queue of "held".
The user types in various bits of information and when complete the program executes the final write to the output print file. The job is somehow released and then is physically printed by CUPS. I suspect that if the user is slow the "held" job times out and then the job is lost.
There are a number of timeout directives in cups.conf but I am unsure which might be appropriate in this case. Or perhaps there is some other timeout thing happening.
View 3 Replies
View Related
Apr 16, 2011
I am running CentOS 5.4 with CUPS v1.3.7 and have a Brother printer (MFC-5895CW) that connects wirelessly to a SonicWall device. The SonicWall is hardwired to my PC. I have found that periodically, the printer queue will become disabled and the only way to re-enable it is to issue a cupsenable command.
I believe that queue only gets disabled if the wireless connection drops in the middle of a print job. I've tried dropping the wireless connection and then bringing it back up when no print jobs are active or pending and the queue is fine for the next print job that is sent when the connection is up.
I did a little research and found that my version of CUPS contains support for an ErrorPolicy setting in the printer.conf file that may prevent the print queue from being disabled. I'm hoping that if I change the default value from "stop-printer" to "retry-job" that this will prevent CUPS from disabling the print queue and requirring a cupsenable command to re-enable the queue.
I don't want to play around with scheduling cron jobs to enable the queue.
View 3 Replies
View Related
Jul 1, 2011
I need to check if I've printed a document. For what I've been reading, going on [URL] and clicking on "Show completed job" should do what I need to do, but it says "No jobs".
View 1 Replies
View Related
Feb 7, 2011
Which commands lists your outstanding print jobs?
View 3 Replies
View Related
Jul 18, 2011
I have a Brother MFC-295CN network printer. Been having a heck of a time trying to get this thing working since I installed Ubuntu 11.04 yesterday. I've been away from Linux for some time and am new at using it. Downloaded and installed using the Software Center:
mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2.i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb
Was able to send a test print and it came out fine. But when I tried to send a print job - nothing. And, the scanner won't work either.
My computer is a Gateway GT5464. It's dual booted with Windows 7.
View 1 Replies
View Related
Oct 4, 2010
im searching a kde programm to show current print jobs. I've installed aptosid (actual version).I've searched the repository and I only found printer-applet which does not run in aptosid - I got the following error messages:
Code:
Traceback (most recent call last):
File "/usr/bin/printer-applet", line 1161, in <module>
[code]...
View 2 Replies
View Related
Dec 14, 2010
Sometimes I want to keep something in PDF files, so I print to the PDF "printer". However, if I inadvertetnly forget to check the PDF creation and rather take the real printer (which is usually only powered up, when I really want to print something), printing goes to the real printers queue and nothing happens ... until, possibly some sessions later, I want to print something (on paper rather than PDF) and power up the printer.
Then all inadvertent garbage comes first and chances are big, that the printer gets junk during power up or reconnecting the cable to the computer and then the whole thing is wasting even more paper, since escape-sequences sent to the printer get chopped and misunderstood by the printer.
In order to stop this alltogether, I am looking for a mehtod, to automatically flush the whole printing queue every time when I log out of my ubuntu session.
I know, there is a command lpq to tell which print jobs are pending, I also know the command cancel -Umyname -a, but this requests for my password. I want to kill all those incomplete or pending print jobs automatically.
And how do I hook such a command script into the logoff or shutdown sequence?
View 1 Replies
View Related
Sep 30, 2009
We are running RHEL 5.1 on the 2.6.18.53 kernel. We are attempting to pass print jobs to a Lexmark printer with the lp -o landscape command. The print jobs continue to print "portrait". Is anyone aware of this issue and is there a work-around to get these print jobs to print in landscape format?
View 5 Replies
View Related
Nov 3, 2010
is it possible to get the length or even the items of both queues, the run queue and the swap queue? I've googled a lot but had no luck. Maybe I havn't used the correct search words...
Is there any header and/or code example to use structures or any API to get these information from the kernel or the scheduler?
View 1 Replies
View Related
Mar 21, 2009
As you know some(?) new computers have no built-in parallel port. The one I built didn't have one anyway so I bought a PCI-express card with a port, a cheap one with a printer port, nothing more.OpenSUSE 11.1 sees the card somehow and "lspci" says it's aCode:Parallel controller: Oxford Semiconductor Ltd Device c110"hwinfo --printer" does not see it at all, whatever that may mean?I have connected my old inkjet to it and configured the queue same way it used to be on the old computer but nothing ever comes out on the printer. Maybe the fact that I'm running openSUSE 64-bit has something to do with it, wrong drivers or some such?
View 9 Replies
View Related
Aug 29, 2010
I'm running:
OpenSuSE 11.1
MySQL 5.0.67
MySQL Administrator 1.2.12
I have one database for my web application. It's using MyISAM tables. In MySQL admin, I went to Backup and created a scheduled backup project called backup1. On the advanced tab, I selected "Lock All Tables" and checked the box for "Backup Selected Database Completely". On the Schedule Backup tab I have "Execute this Project Daily" selected and the time 1AM. The target directory is set along with the connection name. The connection it's using is the same MySQL user that my web application uses in order to utilize the database. It has full access to that database. Now when the backup file is created, it backs up no data at all.
Instead in creates files that are 580bytes in size. When I open the files they contain:
-- MySQL Administrator dump 1.4
--
-- ------------------------------------------------------
-- Server version5.0.67
/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;
/*!40101 SET NAMES utf8 */;
/*!40014 SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0 */;
/*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */;
/*!40101 SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='NO_AUTO_VALUE_ON_ZERO' */;
View 1 Replies
View Related
Jul 31, 2010
I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups:
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
[code]....
View 9 Replies
View Related
Feb 7, 2011
I have a 11.3 machine as a print server sharing out a printer Then I have two clients using that printer. One 11.3 and one 11.4 6 of 6. When I print from LibreOffice on either machines every other print job disappears. I'm a bit puzzled ! It's not random it's exactly every other that doesn't show up at the server. It's not in the server job log.
View 5 Replies
View Related
