I am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
when i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
I've been scouring google, using all forms of guides to try and get these damn nvidida drivers installed so I can move my resolution from 800x600 to 1280x1024 (I have a small monitor) I'm running a NVidia GeForce 260 GTX. I've executed yum update I've run rpm - [URL] and everything installed. I've edited grub.conf to disable the default drivers.
[Code]....
I'm new to linux and am trying to install Nvidia drivers on my system. The install says to :-
1. install Binutils (which i've managed to do)
2.stop the X service from running (here I'm having problems)
I've tried "X -terminate" but I just get an error message. point to how I can terminate the service.
Has anyone tried this with success?
View 5 Replies View RelatedI was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...
View 11 Replies View RelatedI have an Asus UL80vt laptop. This laptop has an integrated (Intel) as well as a discrete (Nvidia 210m) graphics card.
I want to use the nvidia proprietary drivers because from what I understand, it's the easiest way to set up dual monitors (I have an external monitor). I installed the latest nvidia driver: NVIDIA-Linux-x86-190.53. When I try to run the NVidia X Server Settings GUI, it tells me that "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. "
I checked out my xorg.conf and changed the device driver to 'nvidia' instead of 'nv'. Curiously, when I run nvidia-xconfig, it changes the intel device to 'nvidia' which is a problem. So i skipped running that and just stuck with my xorg.conf. When I run startx, I get a message saying "failed to initialize the NVIDIA graphics device PCI:1:0:0".
I've combed through multiple forums which state different kinds of solutions and I've tried different kernel options such as 'vmalloc=512m' or 'noapic' to no avail.
P.S. I've attached my xorg.conf file
I was trying to install the nvidia drivers and used telinit3 on the comand line to stop the XServer but now I'm stuck in the command line. How do I get back to the graphical part?
I tried using telinit 5 but its just starting anacron and doesnt seem 2 do much
I have a nVidia GeForce4 MX 4000 graphics card. How do I install the updated nVidia drivers so I can use the desktop effects in KDE?
View 5 Replies View RelatedA few years back I gave linux a try. It was fun but eventually I dropped it because simple tasks like installing software were always a practice in goose hunting and copy/paste command marathons. I am trying again to get fedora up and going. Thinking many of the old methods would be cleaned up by now. I was trying to install nvidia drivers for my 8800 card.
I download the *.run file and it tells me I need to disable "X...etc" so I init 3 to the command prompt and run the *.run file there. Then the installer says.... "hey buddy.. you need gcc to make this work". ok.. I type init 5 to get back to the internet browser. So I search about google for a few moments and then find the yum command for getting gcc installed. Run the gcc and again... init 3 to get back to the command prompt and run the *.rn file for the nvidia drivers. This time the installer says... "hey man... you need the kernel source tree".
[Code]...
The actual nvidia driver version (260.1912) does not work for my laptop (a Sony Vaio F11 series type, see bottom of page [URL]), I would like to install an older version (e.g. 256.53). Up to now, I cannot figure out how to tell yum to pick up an older version. Is there a way to do this (because kmod-nvidia is a meta package, there may be problems?), or do I have to install 256.53 manually (using the installer provided by nvidia)?
View 11 Replies View RelatedThere are currently two options for nVidia drivers in Lucid Lynx, 173, and current. With the video card in my laptop, 9650m GT, the 173 drivers work but Docky is painfully, unusably slow. With the "current" drivers, Docky is fine but I get progressively worse and worse static-type lines across my screen and eventually it the machine restarts itself. I've tried installing drivers manually but they won't compile against the kernel.
Before installing Lucid, I had 9.04 Jaunty installed, and Docky (at the time still merged with gnome-do) worked without a hitch. I ran into this error first when I installed 9.10 and decided to go back to 9.04, hoping that it would be fixed. I can't remember which version of the nVidia drivers I was using in Jaunty, but is there any way to go back to those drivers in Lucid?
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies View RelatedI've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
The drivers from rpmfusion are the 256.xx version drivers. Unfortunately I have two games from LGP - X2 "the treat" and X3 "Reunion", and those games have BIG problems with the newer 256 drivers.So - I am forced to install the "older" 195.xx range drivers (the last ones that behaved good). The problem is - I cannot use rpmfusion for that -they have only the latest drivers and no older ones-, so I amd forced to download the drivers and install everything by hand.
At first I tought "no problem". I have done that before with other distro's like Mandriva, openSUE, PCLinuxOS etc. and never had any trouble. It was just a case of installing the kernel headers, developmenpackages, compile the driver and tweak the xorg.conf file.After a restart everything works as I wanted.With Fedora 13 however it seems not to go that easy. The first try resulted in a lock-up - even to a point I could not use Ctrl+Alt+F"x" to switch to a terminal. By the way - I "disabled" the nouveau driver in the grub startup configuration, but that also did not helped one bit. This is weird, as compiling did not give any error and I have to assume that part was going ok. I really have no idea what is going wrong here.
I installed Debian 8 on my new computer 3 days ago. Everything went fine, until I tried to install the nvidia non free drivers version 352.21 (for a GTX 970M).I read a lot about that, figuring out I had to add the experimental repo. Here's my sources.list for reference :
Code: Select all# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie main contrib
deb http://ftp.fr.debian.org/debian/ jessie main non-free contrib
deb-src http://ftp.fr.debian.org/debian/ jessie main non-free contrib
[code]....
E: Unable to correct problems, you have held broken packages."but it is not going to be installed" ?I searched on various search engine for this issue with no revelant result..
I have a desktop installation of Ubuntu 8.10 which has somehow lost parts of it's nvidia drivers. Is there some way, short of reinstalling Ubuntu, that I can completely remove the dregs of my nvidia installation, and then re-install it all afresh ?
View 9 Replies View Relatedteh current version according to Hardware Drivers is 195.36.24 the current one on nvidia's site is 256.53 if there is a way to sue the package manager to get it that would be preferable I know how to install their run files they have
View 5 Replies View RelatedI've got Ubuntu 10.10 and a nVidia 8400GS but when I try to install the newest drivers I get the following error:
ERROR: You appear to be running an X server; please exit X before installing.
I did alot of reading on installing nVIDIA Drivers So far, I did it through the Package Manager. But I got the older 260.* drivers. I downloaded the main drivers from nVIDIA Page. Ran the RUN file. I'm running an Giada PC with ION 9400 IGP. What do you people recommend the best way to install? Custom build? Which I don't know how to. I tried to get vdapu installed as well. But I still get Undefined Rendering in Flash Player. And Boxee plays videos cropped on the left hand side. Right now I have 270.40.16 drivers installed.
View 8 Replies View RelatedJust installed Ubuntu 10.04 on my desktop, inserted a nVIDIA cd in order to install the nVIDIA control panel plus drivers, a CD icon appears on the screen but nothing happens, I have right-clicked the icon and selected open but it show me just a folder with 'bin', autorun.exe' etc. and the cd wont start. Same for other cds.
View 9 Replies View RelatedI looking for a new disto been using ubuntu. my friend recommended Debian, I just installed it and made it unusable very quickly by trying to use repositories for ubuntu. I'd like to know if there is an easy way to make my wireless work like in ubuntu it just does, (i don't even need to attach a cat 5 cable after install), and I'm happy in my blissful ignorance. Also an easy way to install nvidia drivers?
I need Broadcom and nivida 173 drivers. I looked through the Debian forums while I had a working system but found nothing easily and iceweavel was so slow, unless there was something wrong with my wired connection. Is there an easy way to install no free drivers?
I need to install the latest drivers for my Nvidia card. I have the Quadro FX 1800.I don't think the Nvidia One click installation will work with this card.I downloaded the drivers from Nvidia and tried to install them but their directions are very confusing. It says "exit x windows" and "restart in init 3". I don't know what that means.Can someone tell me step-by-step how to compile and install the nvidia drivers?I have opensuse 11.2 64-bit clean install with all the defaults, and the Quadro FX 1800.
View 6 Replies View RelatedI am running openSUSE 11.2 64-bit KDE version. I would like to install drivers for my Nvidia GTX 285 1gb video card. How exactly would I do this?
View 2 Replies View RelatedLappy is a Dell XPS M1330
Intel core 2 T7500 2.2Ghz 4gig Ram
Nvidia GeForce 8400M GS
HDD 320
1 64bit system installs but wont let me do updates so now using 32bit thats ok
2 How do I update drivers? My screen seems to have ghosting around the edges
3 On firefox when scrolling down the page its jerky Ive used firefox on most of my Pcs and never had this problem Im duel booting ubuntu and suse and using the internet on ubuntu so far other than these problems suse is fine
i am totally new to linux and ubuntu (10.10 is the first release i have used) I have successfully managed to create a persistent ubuntu 10.10 bootable usb drive. I really want to enable the advanced 3d effects that ubuntu offers but I'm having trouble installing the drivers for my geforce 6600LE on the persistent usb.
I attempted an install from the Appearance window, the package failed to install after downloading. So i used the following commands someone posted:
[Code]...
I just installed 11.04 and I knew I would have to install the NVidia video drivers. So it was no surprise when it popped up a warning and dropped me into Gnome Classic view. So I turned on the NVidia drivers and rebooted. In my desktop selection menu on the login screen I have "Ubuntu" and "Ubuntu Classic".
Unfortunately they look exactly alike, with the Gnome panel along the top, and the panel with the taskbar, desktops and recylce bin on the bottom. I've gone back-and-forth a few times and nothing has changed. Some changes in one environment is not set in the other, like they really are 2 different environments.
According to the Software Center, Unity (not Unity 2D) *is* installed.So how can I boot into the Unity desktop?