OpenSUSE Hardware :: Native LED Monitor Resolution On Intel Arrandale?
May 17, 2010
I can't set up the native resolution for the LED monitor of a Dell Inspiron 1564 laptop with openSUSE 11.2.YaST2 lists correct the graphics adapter as: "Intel Arrandale Integrated Graphics Controller" and the monitor having the resolution: 1366x768 However in /etc/X11/xorg.conf lists only modes with a 1024x768 resolution, which are not really "sharp" on the monitor Besides that it lists the Device as "Vesa-BIOS Graphics". Starting sax2 does not provide me with any option to change these settings (at least not in the graphics mode).
View 3 Replies
ADVERTISEMENT
Apr 25, 2011
When I'm connecting second monitor to the laptop, Display Settings applet (and xrandr -q) does not detect full list of supported resolutions. I need to restart my system or perform Log off while monitor is connected to make full list available.openSUSE 11.4 32 bit, Ati Mobility Radeon HD 3450, proprietary ATI driver 11.3 8.831.2-110308a-115935C-ATI.External monitor is FullHD SyncMaster B2330 (1920x1080)I wonder is there any other workaround to access full resolution that does not require restarting of the system?
View 7 Replies
View Related
Aug 12, 2011
I recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies
View Related
Jan 2, 2010
I've got a little problem with my 9" netbook. It came preinstalled with Ubuntu (factory install), but I reinstalled it to get a fresh karmic as it was a second hand.The problem is, whenever I plug in an external monitor, rightclick on the display icon and click "Configure Display Settings..." both monitors go black and nothing responds. Weird thing though, is that sometimes the mouse appears on the second monitor. I need a solution for this, either creating a xorg file (I have no clue on how to do that) or some other solution that works.
My netbook resolution is 1024*600, the external monitor resolution is 1024*768. It should be noted that I had a similar problem on another Ubuntu laptop (NVIDIA drivers), but it had to do with the resolution height. My laptop had 1440*900 and my external monitor needed to have the height lower then 900.
For further information, this is what the system profiler says about my graphics card:Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller.I hope you guys can help me, as plugging in a netbook to an external monitor (or TV) is not uncommon to me I like doing that, even if there's no point in it.I hope I gave enough information on this, I'm willing to give more if needed of course
View 5 Replies
View Related
Mar 2, 2010
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
View 2 Replies
View Related
May 8, 2011
I actually do have a GeForce4 MX 460 in this pc. I have a 7950gt in a different pc. Oops. I guess the MX 460 cant do 1600x1200 on the dvi output but somehow it can do it on the vga output? I guess I could just use a vga connection instead of the dvi connection.
The problem I'm having is that my LCD monitor (acer AL2021) can't be used at it's native resolution of 1600x1200. This is probably because my GeForce 7950gt graphics card is not being recognized. Xorg seems to think my card is a GeForce4 M 460. (It's not, really!) I'm using Ubuntu 10.04 LTS.
Here's what I've been doing for the last few hours:
This didn't work. 1600x1200 is still not listed.
Tried to run nvidia driver installer:
View 1 Replies
View Related
Jun 19, 2011
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"
[Code].....
View 9 Replies
View Related
Jan 17, 2010
I was using Fedora 11 on my previous laptop, a Toshiba Centrino 2-powered model, and I was having issues with the CPU fan not starting up unless I put it to sleep and woke it up again. I no longer have it due to circumstances beyond my control (aka getting mugged), and I'm looking into getting one of Dell's Core i5-powered Inspiron laptops.
On the odd chance that some people here have gotten their hands on one, I was wondering if there's any support for Core i3/i5-powered laptops in Fedora 11, or should I wait for Fedora 12 before I get one? I almost burnt up the Centrino 2 one before I remembered about the fan problem, and I want to avoid that if possible.
View 7 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
Jun 21, 2011
I'm setting up a Dell Inspiron One 2305 and I can't get the native monitor resolution to work without black borders. I'm also experiencing blurry text in Firefox (not sure if this is related). At most other resolutions it will expand to the edges of the monitor fully. Note that the desktop area doesn't extend into the border. I tried glxgears and noticed that it was only pulling 60fps -- figuring it needed drivers I installed the latest ATI drivers. On reboot I was given more options for resolutions however the native one still doesn't work properly. I looked around for troubleshooting tips and looked into xrandr output.
Code:
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1920 x 1920
DFP1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.0 + 50.0 30.0 25.0 30.0
1776x1000 50.0 59.9 25.0 30.0
[code]....
Using 'configure display settings' in Gnome, any time I picked a resolution that was 50, it would cause the borders. Any time I picked a resolution that was 60 AND xrandr listed a 60 and 59.9 and said 60 was the selected one, the borders would come back for those too.
So I tried
xrandr --output DFP1 --mode 1920x1080 --rate 59.9
Seeing as every resolution with 59.9 worked. However... This still resulted in borders.
View 2 Replies
View Related
Apr 5, 2011
I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies
View Related
Jul 27, 2010
I have a problem during installation of openSuse 11.3 on my brand new notebook. It's an hp8440p with Arrandale integrated graphic controller. The initial install works then as soon as the notebook reboots to complete the install and allow me to log in for the first time, there's no video. If I shut the notebook down and boot into failsafe mode the video works. I shut down again and come back up as a normal boot and no video again.
And what's the difference between normal and failsafe?I ran glxgears and had 3d accel in failsafe..
View 9 Replies
View Related
Nov 15, 2010
I have a Dell U2311H monitor which has a native resolution of 1920 x 1080. My graphics card is an ATI 6870.
Last night I installed Ubuntu 10.10 alongside my Windows installation, and when booting into Ubuntu, the maximum resolution I can select is 1280 x 1024.
How can I resolve this to get Ubuntu to display at the native resolution?
View 9 Replies
View Related
Sep 1, 2011
Canadian hi-fi manufacturer Bryston is shipping a Music Player, which is in effect a pared down Linux box running some media player. The good thing is that it plays the files at their native resolution16bit/ 44. 1KHz for ripped CDs, 24/96 and 24/192 for hirez downloads, as well as other intermediate values.Does anyone happen to know which player they are using?
View 1 Replies
View Related
Feb 3, 2016
How to enable native screen resolution in X using VESA driver? I have IBM/Lenovo ThinkPad T61 with a native screen resolution of 1680x1050, but I am getting 1024x768 instead.
This is a fresh install of Debian 8.3 (latest stable) (Jessie).
The root cause of this is that nouveau graphics driver (which I was using before) was causing me kernel crashes. Full story here: [URL] .....
View 7 Replies
View Related
Dec 14, 2010
I am planning on installing Ubuntu on my new laptop with a native resolution of 1920x1080 however the install disc (I booted into the "test") part, sets my resolution to 2048x1536.Keeping it on 2048x1536 cuts off about 50 pixels on the right side of my screen so it must not be right. So I tried changing it from the "Monitors" settings back to 1920x1080 and everything is so large and it is stretched horizontally. Is this just because I'm running the "try me" part, or is there something wrong with Ubuntu and my video card?
Product:US-VPCF1290X-LBOM
Component: Standard capacity battery
Component: Inteli7-740QM processor (1.73GHz) with Turbo Boost up to 2.93GHz
[code]....
View 4 Replies
View Related
Sep 17, 2010
Is there a way to determine the native resolution of the current console display device from the shell?
I know I can get the current console settings, but I'm looking for the native screen size of the display hardware, whether or not it conflicts with settings.
View 6 Replies
View Related
Apr 13, 2011
I use Slackware64 Current and since a few weeks, X doesn't automatically apply the native resolution (1680x1050) of my LCD screen, instead it uses a resolution of 1024x768.Since I bought this monitor in 2009, It had always worked as expected, and it's only since lately that I experienced this problem.After X has started, I can change the resolution through the kde tool but after an X restart everything is forgotten. Apparently, the correct resolution is detected but it is not applied.
My monitor is HDMI1.I don't use a xorg.conf file as it had always worked well this way, so I would like to track down this regression.I have an intel GM45 chipset.I have tried Mesa 7.9 and 7.10 in case.
View 13 Replies
View Related
Dec 5, 2010
I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:
1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use
2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case
3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs
4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel
View 2 Replies
View Related
Jul 8, 2011
I tested OpenSuse 11.4 as a guest OS via virtualbox on a win7 32bit host. Output to my 16:9 screen was perfect with a plentiful choice of high resolutions. Now with Suse (32 bit) properly installed as the host the only resolutions are 1024X768 and below and I am stuck with 4:3 ratio. My PC is an Intel Atom D945GCLF2 which has integral graphics. The monitor is the VGA input of a Samsung TV.
View 9 Replies
View Related
May 27, 2011
Got a system that I've been using for a long time now without any problems. Now suddenly it won't use a higher resolution than 1024x768.I never added any mods to the configuration and have not added any software other than recommended updates it quite a while.Any ideas what happened or how to fix it? I checked and the monitor/graphics card will still do upper resolutions with windoze so I'm guessing the hardware is alright.Using OpenSuse 11.3, 64bit, on a dual core athalon with a Sapphire ATI x1600 graphics card and a 22 inch flat screen that is supposed to go 1600 x 1050.
View 6 Replies
View Related
Feb 6, 2010
I'm running WoW in Ubuntu 9.10 with wine. My screen's native resolution is 1920x1200. When I play WoW in Windows I set it to 1920x1080 in fullscreen because that aspect ratio allows me to see more of the playing field. In windows it doesn't stretch the screen so I have a black bar at the top and bottom of my screen.
When I set it to 1920x1080 under wine, it stretches my screen. Is there any way I can make it not stretch?
I tried searching forums/google but I couldn't find anything related to my question.
View 1 Replies
View Related
Aug 4, 2010
I setup 11.3 on PC and Belinea monitor (troubleshoting monitor). Everything was fine but since I installed nvidia driver (via 1-click wizard) resolution and font-size has broken
So I plugg another one monitor - Samsung SyncMaster and reboot system. After boot-up resolution and either font size were OK. I was able to select correct resolutoion and font size wasn't so tiny like on Belina.
It's looks like OS 11.3 have problem with correct output on belinea monitor. Driver is installed correctly. I tried to genereate new xorg.conf .
View 3 Replies
View Related
Jun 15, 2010
The monitor is a dell 2009 w (16:10 with around 1680x1050 IIRC) I have a fujitsu desktop with the intel core i5 CPU. the crux is the i5 has an integrated GPU. hwinfo says 'clarkdale integrated graphics controller' and yast tells me the same too, knowing the monitor model as well (with correct resolution) So we have an intel GPU ... but the resolution of the kde desktop is always the 1024x768. sax2 do not accept any other resolutions - he knows only threee, one larger at 1280x1024. But even if i try to turn it on he falls back to 1024x768. this is independed from runlevel 3 or 5. the /etx/X11/xorg.conf knows the monitor and the two modes 1024 and 1680 - but everyhwere else it seems that it is unknown, using default vesa mode... the gfx tools seem to ignore the ability of the higher resolution.
View 4 Replies
View Related
May 21, 2011
I've instaled 11.4 and in personal configurations the resolution is set fine (1920x1080), but it's don't maximizes all monitor area. I'm using Radeon 5670 with a TV/Monitor HDMI connection 1080p.In Win7 running fine.
View 6 Replies
View Related
Sep 13, 2011
I have a problem with my screen resolution in Linux. This happens with both openSUSE 11.4 and Fedora 15. The moment my PC restarts after I have installed the operating system it will boot up with a screen resolution higher than my monitor supports. My screen supports a maximum resolution of 1600 x 1200 @ 75Hz and Linux sets the default resolution way too high at boot, now all I get is a message from my screen asking me very nicely to change the signal timings, but I can't because I can't see anything to change it to a lower value (I don't want it so high anyways because then everything is too **** small). My monitor is a SONY GDM-5410 and the Graphics card is an AMD Radeon HD 4870 1GB. It nly works when I boot the system to FailSafe mode, but then I can't cahnge it permanently.
View 1 Replies
View Related
Jun 15, 2010
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
View 6 Replies
View Related
Feb 4, 2011
openSUSE 11.2 (i586)
VERSION = 11.2
on an IBM x3250
Problem is that after the screen comes up to chose the default version or failsafe, my monitor shows no input. If I delete the VGA 0x031 (i think that's the number) on the Options line in the screen where you chose the version, I get my command line interface.
Can I make the blank VGA options permanent?
View 5 Replies
View Related
Apr 10, 2011
I am using 11.4 32 bit Gnome. It is working fine expect high CPU usage. Specially by X-ORG. I am running this on my old PC with core2duo, Intel motherboard DG31PR, Integrated Intel GMA 3100 Graphics(intel G31 Exprss chipset) , 3 GB RAM I went to Hardware information in YAST and found some discrepancies.
1. desktop board is listed as D945GTP instead of DG31PR
2. in framebuffer 1440 X 900 is not listed which is my monitor resolution
3. BIOS info has no vendor name
View 9 Replies
View Related
Mar 12, 2010
I'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict
HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.
View 9 Replies
View Related
