I need help with configure my xorg.conf to use 1 monitor as default and start all programs windows notes and popups on this monitor.I have 2 monitors with my main monitor to the right (1920x1200). I want to move programs or any other windows to my left (1280x1024) monitor.So the question is, how can i configure xorg.conf to start all programs on my right monitor.
View 4 Replies
I am currently running openSUSE 11.3 x86-64 with two monitors, a 24" and a 20", both running off of an nVidia 9800 GTX+ using twinview. Does any one know of a way to have programs open by default on my 24" display or at least default to the display which the program was used previously. My computer seems to prefer to open programs on the 20" more so than the 24". In all other aspects the 24" is the primary monitor. I think that I am looking for some sort of setting within KDE.
View 4 Replies View RelatedI have a problem with my screen resolution in Linux. This happens with both openSUSE 11.4 and Fedora 15. The moment my PC restarts after I have installed the operating system it will boot up with a screen resolution higher than my monitor supports. My screen supports a maximum resolution of 1600 x 1200 @ 75Hz and Linux sets the default resolution way too high at boot, now all I get is a message from my screen asking me very nicely to change the signal timings, but I can't because I can't see anything to change it to a lower value (I don't want it so high anyways because then everything is too **** small). My monitor is a SONY GDM-5410 and the Graphics card is an AMD Radeon HD 4870 1GB. It nly works when I boot the system to FailSafe mode, but then I can't cahnge it permanently.
View 1 Replies View RelatedI have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies View RelatedWhenever I reboot my computer, my second monitor isn't activated and I have to manually set it up again.
View 3 Replies View RelatedI recently had a wine program crash after I tried to set it within itself to windowed mode. Now ever since, when I boot, I load my sound app and it loads on the smaller 2nd monitor to the right. ANY wine pop-up or program loads on the 2nd monitor to the right. Even though I've checked that my primary, larger monitor on the left is #1 both in displays and through amdcccle. I've read through my xorg.conf but don't see why pop-ups windows and wine windows are loading to the smaller monitor.
My xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
[code]...
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
Is there any way to specify which monitor the console is displayed on in Linux?
Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer.
I don't see a way in my BIOS to change the default video card.
I have a relative who made the mistake of changing the resolution of her display to something that her monitor does not support. The monitor no longer displays anything.If she connects another monitor to the computer, the monitor will work properly. If she boots off the live CD, her current monitor works properly. If she swaps out her graphics card with another with the current monitor, there is no display.Apparently, there is a remembered setting for the resolution of her particular monitor. Is there a way that it can be reset back to the default?
View 5 Replies View RelatedI have two screens, my regular monitor and my TV. When I open a program, sometimes it opens on my monitor and sometimes it opens on my TV. I don't usually have my TV on, so I want to have everything to default to open on my monitor.
View 6 Replies View RelatedI have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies View RelatedI swapped my monitors and reconfigured x using Nvidia-settings. My main monitor is set as primary display and absolute. My secondary monitor is set to left of..
My desktop Icons default to the left monitor not the primary.
Is there a way to change this?
I am using ATI HD3200 graphics card, and running Ubuntu 10.04 Lucid on a laptop. It have VGA port so I can attach external LCD monitor to the laptop. I am using fglrx driver.
My question is how should I configure the xorg.conf file so that when I attached external monitor, the GNOME menu bar (Applications, Places and System, etc) will be put on the external monitor instead of laptop LCD monitor.
I have checked varies web resource that saying you can drag and drop the GNOME menu bar to the new screen, it never worked. Someone also suggested to add new bar into the screen and GNOME will remember it, I can't even find the option to do that.
How can I change the default video mode for ubuntu to the lowest possible to be able to work on SD TV instead of LCD monitor?
View 1 Replies View RelatedI'm using Redhat 5 with a video card nvdia fx 1500 and a zalman zm-m220 monitor
Has anyone configured a 3D monitor with redhat?
I'm trying to set the resolution to 1680x1020. I edit /etc/X11/xorg.conf and try to manually enter the resolution but after a reboot it goes back to the default.
which is the file i need to edit to manually enter the resolution.
It should give me daily internet usage stats something/vaguely like this:-I have tried ntop and darkstat ,but they were too complicated and cannot be launched from notification area like this..Also tried using KtrafficAnlyzer by installing KDE core, i am not very amused by the idea of having to install a massive run time file package for a simple tool.
View 4 Replies View RelatedFirst off How do you disable IPV6 access on all connections used on the pc-is there a way to test for ipv6 connectivity?
Secondly how secure is a default opensuse 11.04 machine out of the box? should i be making some changes to the default configuration?
Thirdly what does the default firewall settings do? on my network i use my wpa2 psk aes connection via my local wireless network-in the event that some can hack into my wireless would the opensuse firewall prevent direct access to my pc from a attacker on the same wireless subnet?
Fourthly when does opensuse 11.04 go out of date? in a year from now?
easy I managed to install Oracle, JBoss and other software, connected to it via VNC. Once finished I decided to move the box to far corner and work with it via putty and vnc. But then problems with vnc started. Whenever I tried to connect via vnc I got background screen with cross cursor and then it stuck, no login screen. I spent a lot of time trying to fix it. I red many forums and this one in partucular : VNC is not working - openSUSE Forums Nothing helped. I have noticed that vnc doesn't work if monitor not physically connected to the box.
Once monitor connected, even if monitor is not powered up, vnc resumed to work correctly. But it looked senseless for me, what a point to have Linux box controlled via vnc if I still have to connect monitor, it drove me crazy !Today I have found a solution and want to share with you. It is not my idea I have found it here :K7V FreeNAS system won't start without a monitor. - alt.comp.periphs.mainboard.asus | Google GroupsThe idea is to create "fake monitor" which cheats graphic card, makes it think a monitor is connected. I have bought a VGA connector then:
Connect 75 ohm resistor from pin 1 to pin 6
Connect 75 ohm resistor from pin 2 to pin 7
Connect 75 ohm resistor from pin 3 to pin 8
[code]....
have installed kvm using yast and now when I try add new mashine I am getting message "virtual monitor is not running and to run xen I need restart my opensuse, which I did and still getting the same message... thats what I am getting when going to manager virtual mashines -> add new mashine : Traceback (most recent call last):
[Code]...
GNOME system monitor is constantly freezing and not responding when i click on first tab 'System' Do somebody knows some workarounds for this issue? It's the same on freshly installed system and also on updated GNOME 2.28 from stable repository.Sometimes on second or third atempt it is working, but i cannot accept such an level of unstability and bugs, discovered on daily basis of testing openSUSE 11.2. There are much more very basic issues in this release which are normal for beta stage, but not for almost 3 moths old system...
View 2 Replies View Relatedi wanted to check the cpu performance monitor also, can i use readyboost in opensuse? I wanted to try that out as well
View 7 Replies View RelatedI have not checked for a while but did, before posting this, do a search for multi monitor support with KDE 4.4.4 and found nothing.
From what I understand 11.3 is out sometime next month and KDE 4.4.4 is the KDE environment that will be released with that iteration of SUSe.
About a month ago I read about a number of problems with multiple monitor support under 4.4.4. Primarily these issues seemed to be with no more than 2 monitors. The SUSe 11.2 machine here uses KDE 4.3 runs three monitors (Intel core quad, pair of NVidia PCIe graphics cards). I was wondering whether any of the bugs with this type of configuration have been resolved. From what I understood 4.4.4 worked with problems using Twinview but I was not able to find anything that addressed the configuration of having separate X Screens.
Does anyone else have a resource monitor appearing on their KDE desktop? My is in the upper-right corner, and lies on top of all other windows. I can work with windows beneath it alright, but it is always showing.
The resource monitor is always translucent, and appears to have some sort of vertical "thermometer"-style usage scale on its left side. Beside that are two scrolling graphs. The only text/label appears to be a percentage that matches the thermometer bar, but there is nothing to tell me what resources are being monitored. Regardless, I use other resource monitoring software and I do not want this one on my desktop.
Anyone know of a upload/download monitor for suse 11.3
View 3 Replies View RelatedI'm using the system system monitor applet, and ksysguard, with lm sensors to monitor CPU / GPU temps and fan speeds. Works great, and I love the system monitor applets fuel gauge style display. However, I don't see any way to configure maximum temp thresholds in either of these. It appears that ksensors previously allowed the configuration of temp alerts, but this appears to be a pretty old school app at this point. I am surprised that ksysguard and system-monitor don't have alerting functions. Am I just missing this, or is there another applet that is currently providing this functionality?
View 2 Replies View RelatedI have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:
1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use
2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case
3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs
4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel
monitor connectedbut whene to watch movie i connect my TV using HDMI cable.when i was using windows i could setupnd it would stay theat way but not in linux.Issue/RequestRequest: i want to see on my TV an empty Desktop.'m able to configure it all in ATI Catalyst.BUT)Issue : after restart or after i disconnect HDMI cable confugurations wont save. well i would be able to live with it, but to get an empty desktop on my TV i have to shoose multi-desktop, but to activate it i have to restart my PC again.
View 9 Replies View RelatedI opted to blow away my system (no did not save xorg.conf), and do a clean install of 11.3. Not a big deal to blow it away, nothing lost.
Dell Dimension C521, 3GB RAM, Athlon DualCore
OpenSuse 11.3 x64
Nvidia GeForce 6150LE (on mainboard)
Dell 2048FP 24" Monitor, connected via VGA
When doing the install, all appears to go well. I added the "nomodeset" option after the first boot to avoid the graphics issues. KDE comes up and is in 800x600 mode at 50hz. That is the best resolution it will show. All other options in the configure desktop applet are lower. This monitor was driven at 1900x1200 on the same config with 11.2.
[Code]...
In the nVidia-Settings applet (run as root), it shows the display as "CRT-0". 11.2 showed it as a Dell.
OpenSuSE 11.3 Radeon graphics
How do you set it so the monitor does not turn off. I want to run a slideshow as the screensaver.
